Friday, May 29th 2009
Kingston Shows Off HyperX Fan
With advances in DRAM technology, memory vendors are able to up module densities, while also providing high DRAM speeds and latencies as low as possible. For enthusiasts and overclockers, even a slightly cooler memory module could make the difference between high speed and record setting speed. Memory manufacturers went beyond heatspreaders, and started off with heatsinks mounted on top of each module. The trend was started by manufacturers such as Corsair and Patriot. The former was even the first to start the trend of active air-cooling for modules with heatsinks.
Following the likes of Corsair, G.Skill, OCZ, and A-Data, Kingston seems to be ready with its own active memory cooler that is designed to cool the recent designs of the company's modules that feature integrated heatsinks. The HyperX fan cooler consists of a blue shroud with the "X" motif cut on its sides. The top holds two blue LED-lit 60 mm fans, with a maximum acoustic output of 28 dBA. The cooler latches on to the motherboard's memory module retention knobs. Kingston is expected to launch this at the upcoming Computex event. It will be available either separately, or part of its high end T1 series HyperX kits. A teaser video can be watched here.
Following the likes of Corsair, G.Skill, OCZ, and A-Data, Kingston seems to be ready with its own active memory cooler that is designed to cool the recent designs of the company's modules that feature integrated heatsinks. The HyperX fan cooler consists of a blue shroud with the "X" motif cut on its sides. The top holds two blue LED-lit 60 mm fans, with a maximum acoustic output of 28 dBA. The cooler latches on to the motherboard's memory module retention knobs. Kingston is expected to launch this at the upcoming Computex event. It will be available either separately, or part of its high end T1 series HyperX kits. A teaser video can be watched here.
17 Comments on Kingston Shows Off HyperX Fan
28 db seems a bit high.
28db is loud, by my definition.
28db is 28db.... small fan or large fan, 28db is still going to be 28db.
The only way you can truly compare is if the same device and setup is used, i.e everyone sends their products to the same place for sound testing.
Its only a rough indicator, for example I have had fans that are quieter than others at a higher dB rating on the packaging
They look cool so it`s nice to have them around ..
The problem is that dBA readings provided by manufacturers are very misleading, the further away from the noise source the less decibels the meter will read and manufacturers never state at which distance the readings were taken.
I dont have any meters, but i chose fans rated around 20dba - picked the quietest of them, and then undervolted them all to 5v or 7v as needed.