Monday, July 13th 2009

Gigabyte GA-P55M-UD4 Micro-ATX Motherboard Detailed

One of Gigabyte's first LGA-1156 motherboards in the micro-ATX form-factor, the GA-P55M-UD4 was previewed by CPU3D.com, revealing an upper-mainstream motherboard sporting all the essentials and a little more. The CPU socket is powered by a lavish 14-phase circuit, cooled by independent VRM heatsinks. The CPU is wired to four DDR3 DIMM slots for dual-channel memory. The expansion slots on this board include two PCI-E x16 slots (electrically x8, x8 when both are populated), one open-ended PCI-E x4 slot, and a legacy PCI slot. The P55 PCH provides five internal SATA II ports (blue), and one eSATA port on the rear-panel. An additional controller provides two SATA II ports (white) and the legacy IDE connector. 8-channel HD audio driven by Realtek ALC889A codec, one gigabit Ethernet interface, two Firewire ports in all, and 14 USB 2.0 ports make for the rest of the feature-set. It makes use of Gigabyte's Ultra Durable 3 construction. The GA-P55M-UD4 will be part of Gigabyte's first wave of LGA-1156 motherboards.
Source: CPU3D
Add your own comment

19 Comments on Gigabyte GA-P55M-UD4 Micro-ATX Motherboard Detailed

#1
DanishDevil
Looks promising, Mr. Blurrycam II (who is slightly more focused than his father). Odd looking heatsinks. I can't wait to see a UD5 or UD6 mATX board from them!
Posted on Reply
#2
xkche
nice!!!

O.o... where's the chipset ¿?
Posted on Reply
#3
Duncan1
xkchenice!!!

O.o... where's the chipset ¿?
inside the cpu:D

P55 = no chipset
Posted on Reply
#4
xkche
Duncan1inside the cpu:D

P55 = no chipset
now i understand... :S i make a mistake, i was confused with cpu's

Thanks!
Posted on Reply
#6
xkche
Duncan1inside the cpu:D

P55 = no chipset
cool_recepWe had Gigabyte GA-EP55A-UD4P which had SATA III and Open Nand Flash Interface.

Can be found here :

www.chip.com.tr/urun/gigabyte-ga-ep55a-ud4p_i2570.html

Technical Details:

www.chip.com.tr/urun/gigabyte-ga-ep55a-ud4p_t2570.html

Open Nand Flash Interface:

www.chip.com.tr/urun/gigabyte-ga-ep55a-ud4p_s2570.html
hey, now what i remember, in guru3d has the preview of one gigabyte P55... the same of the links... look at!

www.guru3d.com/article/gigabyte-p55-motherboard-preview-p55ud4p/
Posted on Reply
#8
Kitkat
it seems whenever they use the orange slots it means the cheaper (value) one? I just notice on both platforms. Maybe theres another Micro 55 too.
Posted on Reply
#9
DanishDevil
The easiest way to tell with Gigabyte is by the ending. UD4 is Ultra Durable 4. They have released UD5 and UD6 versions of their boards, and the higher the number, the higher-end board.
Posted on Reply
#10
Kitkat
DanishDevilThe easiest way to tell with Gigabyte is by the ending. UD4 is Ultra Durable 4. They have released UD5 and UD6 versions of their boards, and the higher the number, the higher-end board.
yeah i figured something like that too i just didnt post it ;) but if u look also u will ntice all the lower vers have an orange slot (atleast that marketing is consistant and not all over the place)
Posted on Reply
#11
xkche
Kitkatyeah i figured something like that too i just didnt post it ;) but if u look also u will ntice all the lower vers have an orange slot (atleast that marketing is consistant and not all over the place)
well, the orange (and red) slots for RAM is about the DDR that you can use... the combination red/orange is for DDR2, and white/light-blue is for DDR3... i see this in AMD Mainboards with 790X chipset...

in the PCI-E, the orange means 8x and light-blue means 16x (CF 8x-8x)

PD: i don't speak to much english, that's why i don't know how said the right colors :D, forgive me :'(
Posted on Reply
#12
my_name_is_earl
Awesome, no NB heat to worried about. But I'll wait for Larrabee to show up because everything you buy these day seem to be obsolete pretty soon.
Posted on Reply
#13
Kitkat
so its the cheaper one.
Posted on Reply
#14
DanishDevil
Yeah, but because it's mATX, they may never release a UD5 or UD6 version. But they will if they know what's good for 'em!
Posted on Reply
#15
phanbuey
is this SLI compatible as well? or is that only for the 1366?
Posted on Reply
#17
phanbuey
DanishDevilGood question.
No... wait... its not. Just read the SLI/Crossfire stamped next to the second PCI-e slot :slap:.

Sweeeeeet... may be getting one of these if the LGA 1156 can OC to 4.2 or so on water. Otherwise new GFX cards for meeeeee.
Posted on Reply
#19
Oblivion-330
Whats with all these newer motherboards and the retarded board heatsinks??? Wouldn't something like Asus P5Q-Deluxe copper fin design be the best? or at least Al fin for cheaper boards? Seems strange that they make weird thick heatsink designs to me..
Posted on Reply
Add your own comment
Dec 20th, 2024 14:49 EST change timezone

New Forum Posts

Popular Reviews

Controversial News Posts