Realtek Modded Audio Driver for Windows 10/11 - Only for HDAUDIO

[AAF Optimus]

NEW REALTEK DRIVERPACKS RELEASED
DRIVER VERSION UPDATED TO 6.0.8721.1
DRIVER SIGNED WITH NEW CERTIFICATE
NEW: REALTEK UAD - DCHU SOUND DRIVER

Spoiler: ENHANCEMENTS

SOUND BLASTERX 720º
DOLBY ATMOS FOR GAMING
DOLBY DIGITAL LIVE - DTS INTERACTIVE (CHOOSE ONE)

INCLUDES REALTEK AUDIO CONTROL APP.
INCLUDES MICROSOFT VISUAL C++ UWP RUNTIMES, FOR THE FACT OF ALL OTHER MS STORE APPS NEEDED THEM

IT IS NECESSARY THAT YOU ACTIVATE THE SIDELOAD OR DEVELOPER MODE IN "START \ CONFIGURATIONS \ UPDATE AND SAFETY \ FOR DEVELOPERS"

LINK TO DOWNLOAD

TO THOSE WHO FOUND PROBLEMS IN THE INSTALLATION OF APPS REALTEK OR DOLBY, THE LINKS OF THE SAME IS FOUND BELOW (MICROSOFT STORE).
REALTEK
DOLBY

Spoiler: IMAGES

SOUND BLASTERX 720º:

REALTEK AUDIO CONTROL APP:

DOLBY ATMOS FOR GAMING:

GOOD RESORT TO ALL!
THIS IS ONLY THE BEGINNING!

 

[Castyrael]

NEW REALTEK DRIVERPACKS RELEASED
DRIVER VERSION UPDATED TO 6.0.8721.1
DRIVER SIGNED WITH NEW CERTIFICATE
NEW: REALTEK UAD - DCHU SOUND DRIVER

Spoiler: ENHANCEMENTS

SOUND BLASTERX 720º
DOLBY ATMOS FOR GAMING
DOLBY DIGITAL LIVE - DTS INTERACTIVE (CHOOSE ONE)

INCLUDES REALTEK AUDIO CONTROL APP.
INCLUDES MICROSOFT VISUAL C++ UWP RUNTIMES, FOR THE FACT OF ALL OTHER MS STORE APPS NEEDED THEM

IT IS NECESSARY THAT YOU ACTIVATE THE SIDELOAD OR DEVELOPER MODE IN "START \ CONFIGURATIONS \ UPDATE AND SAFETY \ FOR DEVELOPERS"

LINK TO DOWNLOAD

TO THOSE WHO FOUND PROBLEMS IN THE INSTALLATION OF APPS REALTEK OR DOLBY, THE LINKS OF THE SAME IS FOUND BELOW (MICROSOFT STORE).
REALTEK
DOLBY

Spoiler: IMAGES

SOUND BLASTERX 720º:
View attachment 124686

REALTEK AUDIO CONTROL APP:
View attachment 124687

DOLBY ATMOS FOR GAMING:
View attachment 124688

GOOD RESORT TO ALL!
THIS IS ONLY THE BEGINNING!

Hi Alan, Tried to install the latest drivers, but for me, the creative apps says that was not detected a compatible driver and i have an ecco in all channels (I'm using 7.1 channels for my Razer Tiamat 7.1), simmilar if i had selected a room ambience on the old realtek console.

If i disable de enhancements on my driver, the ecco goes off but the enhancements from the dolby app stop working, also, i can't change the values of room correction, increasing or decreasing the values does nothing, and, i have a poor bass on the subwofer with this driver.
Know something to fix this? I have a Z270 Gaming M3 Board with an ALC1220 codec.

Thanks in advance.

 

[CityCultivator]

Hi Alan, Tried to install the latest drivers, but for me, the creative apps says that was not detected a compatible driver and i have an ecco in all channels (I'm using 7.1 channels for my Razer Tiamat 7.1), simmilar if i had selected a room ambience on the old realtek console.

If i disable de enhancements on my driver, the ecco goes off but the enhancements from the dolby app stop working, also, i can't change the values of room correction, increasing or decreasing the values does nothing, and, i have a poor bass on the subwofer with this driver.
Know something to fix this? I have a M270 Gaming M3 Board with an ALC1220 codec.

Thanks in advance.

Did you previously install older realtek mods?

 

[Castyrael]

Did you previously install older realtek mods?

No, I've only removed the driver that was using, verified that i was with the default realtek driver that windows pre-install and then installed this version of the driver.

 

[ador250]

is the UWP version of sound blaster connect don't work with UAD drivers ? @Alan Finote

 

[AAF Optimus]

is the UWP version of sound blaster connect don't work with UAD drivers ? @Alan Finote

BlasterX Connect UWP version work in UAD Realtek drivers. But in this case, there is the default version (Connect 2).

 

[burakyasar1]

Hi @Alan Finote download link for 6.0.8721.1 driver is not working could you check it please.

 

[AAF Optimus]

Hi @Alan Finote download link for 6.0.8721.1 driver is not working could you check it please.

Link fixed!!

 

[Skullknight33]

Hello and Muito Obrigado for the driver compilation you have done man ! Please check the download link you posted on Onedrive because it's down ( or some setting or download quota is blocking access to the file itself ... )

 

[AAF Optimus]

NEW REALTEK DRIVERPACKS RELEASED
DRIVER VERSION UPDATED TO 6.0.8721.1
DRIVER SIGNED WITH NEW CERTIFICATE
NEW: REALTEK UAD - DCHU SOUND DRIVER

Spoiler: ENHANCEMENTS

SOUND BLASTERX 720º
DOLBY ATMOS FOR GAMING
DOLBY DIGITAL LIVE - DTS INTERACTIVE (CHOOSE ONE)

INCLUDES REALTEK AUDIO CONTROL APP.
INCLUDES MICROSOFT VISUAL C++ UWP RUNTIMES, FOR THE FACT OF ALL OTHER MS STORE APPS NEEDED THEM

IT IS NECESSARY THAT YOU ACTIVATE THE SIDELOAD OR DEVELOPER MODE IN "START \ CONFIGURATIONS \ UPDATE AND SAFETY \ FOR DEVELOPERS"

LINK TO DOWNLOAD

TO THOSE WHO FOUND PROBLEMS IN THE INSTALLATION OF APPS REALTEK OR DOLBY, THE LINKS OF THE SAME IS FOUND BELOW (MICROSOFT STORE).
REALTEK
DOLBY

Spoiler: IMAGES

SOUND BLASTERX 720º:
View attachment 124686

REALTEK AUDIO CONTROL APP:
View attachment 124687

DOLBY ATMOS FOR GAMING:
View attachment 124688

GOOD RESORT TO ALL!
THIS IS ONLY THE BEGINNING!

FIXED LINK FOR THIS DRIVERPACK

 

[MAOCUBO]

@Alan Finote

hello
I installed the new 6.0.8721.1 in my pc, everything works with jacks, but in SPDIF dolby digital live 5.1 only plays in 2.1 (left, right and subwoofer speakers), the surround (rear) speaker don't play.
Does the drivers in SPDIF expands 2.0 sound to surround 5.1 or not? or does it need 5.1 sound to play in surround?
PS: in the sound control panel the dolby digital test works in all speakers.

my windows versions is 1903 and realtek ALC892
thanks in advance

 

[Knot]

Hello , i did install the drivers , and now i have dts in games but only through optical out, is there a way to passthrough via hdmi in graphic card ?
i have rx 570 and my tv can passthrough dts via optical to receiver

Thank you

 

[CityCultivator]

@Alan Finote

hello
I installed the new 6.0.8721.1 in my pc, everything works with jacks, but in SPDIF dolby digital live 5.1 only plays in 2.1 (left, right and subwoofer speakers), the surround (rear) speaker don't play.
Does the drivers in SPDIF expands 2.0 sound to surround 5.1 or not? or does it need 5.1 sound to play in surround?
PS: in the sound control panel the dolby digital test works in all speakers.

my windows versions is 1903 and realtek ALC892
thanks in advance

What software were you using to play content?

Hello , i did install the drivers , and now i have dts in games but only through optical out, is there a way to passthrough via hdmi in graphic card ?
i have rx 570 and my tv can passthrough dts via optical to receiver

Thank you

APO Driver required.

 

[syriusm]

I installed 6.0.8721.1
On analog 5.1. every speaker tested and works in test mode but I do not hear processing stereo to surround.
also changing properties of sound doesn't apply.

Used DDU to uninstall old drivers, clean old driver script, and BCUninstaller neither helps.

Looks promising but ... x) thank you Alan Finote for your work!

 

[Knot]

What software were you using to play content?

APO Driver required.

Hello , thanks for your reply , could you say which content of Apo driver i should select during the instalation ?
as you can see i have the "dts interactive" only on optical , and wish to have it on the hdmi also

thank you

 

[CityCultivator]

Hello , thanks for your reply , could you say which content of Apo driver i should select during the instalation ?
as you can see i have the "dts interactive" only on optical , and wish to have it on the hdmi also

thank you


View attachment 124902

View attachment 124901

You need DTS Connect APO.
Continue discussion in the APO Driver thread.

 

[syriusm]

I installed 6.0.8721.1
On analog 5.1. every speaker tested and works in test mode but I do not hear processing stereo to surround.
also changing properties of sound doesn't apply.

Used DDU to uninstall old drivers, clean old driver script, and BCUninstaller neither helps.

Looks promising but ... x) thank you Alan Finote for your work!

I found solution on official Apo Driver guide site - google sheet
edit default.xml needed
C:\Windows\System32\dolbyaposvc

change from ch_count="2" to
-> 2.1 speakers: ch_count="4"
-> 5.1 speakers: ch_count="6"
-> 7.1 speakers: ch_count="8"

extremely happy now, BIG THX! ^^

 

[MAOCUBO]

I found solution on official Apo Driver guide site - google sheet
edit default.xml needed
C:\Windows\System32\dolbyaposvc

change from ch_count="2" to
-> 2.1 speakers: ch_count="4"
-> 5.1 speakers: ch_count="6"
-> 7.1 speakers: ch_count="8"

extremely happy now, BIG THX! ^^

in that file the only string i have like "ch_count" is this one:
<endpoint type="internal_speaker" brand="Generic" model="Default" operating_mode="normal" fs="48000" total_count="2" front_count="2" side_count="0" height_count="0" has_subwoofer="0">

i change it for:
<endpoint type="internal_speaker" brand="Generic" model="Default" operating_mode="normal" fs="48000" total_count="6" front_count="2" side_count="2" height_count="0" has_subwoofer="1">

but it still does not processes stereo to surround.

any other suggeestions?

thanks

 

[CityCultivator]

in that file the only string i have live "ch_count" is this one:
<endpoint type="internal_speaker" brand="Generic" model="Default" operating_mode="normal" fs="48000" total_count="2" front_count="2" side_count="0" height_count="0" has_subwoofer="0">

i change it for:
<endpoint type="internal_speaker" brand="Generic" model="Default" operating_mode="normal" fs="48000" total_count="6" front_count="2" side_count="2" height_count="0" has_subwoofer="1">

but still the still does not processes stereo to surround.

any other suggeestions?

thanks

Can you open Dolby Atmos app? On which profile it is set?

 

[MAOCUBO]

Can you open Dolby Atmos app? On which profile it is set?

yes dolby atmos opens no problem, it works fine (just don't processes stereo to surround) and the profile is set to Dinâmic.
The Default Format Sound in sound options is set to Dolby Digital Live (5.1 Surround).

 

[henk717]

NEW REALTEK DRIVERS RELEASED (VERSION: 6.0.1.8622)
LIST OF APOs:

• SOUND BLASTERX 720° (PLAY & RECORD)
• REALTEK NATIVE EFFECTS (PLAY & RECORD)
• SOUNZREALEXP / VOIZREALEXP (PLAY & RECORD)
• SAMSUNG SOUNDALIVE 3D (PLAY ONLY IN ANALOG INTERFACE)
• A-VOLUTE NAHIMIC 3 (PLAY & RECORD)
• DOLBY DIGITAL PLUS (PLAY IN ANALOG & DIGITAL INTERFACE)
• DOLBY PCEEv4 (ONLY IN DIGITAL INTERFACE)
• REALTEK ASIO DRIVER INTEGRATED

IN THE DIGITAL INTERFACE, THE DOLBY DIGITAL ENCODER IS PRESENT, THROUGH THE DOLBY PCEE4, BUT NOT ALONE. THERE ARE ALSO THE NATIVE EFFECTS OF REALTEK, A-VOLUTE NAHIMIC 3, DOLBY DIGITAL PLUS, ETC.

ENABLED THE STAND FOR 24 BIT ON ALL RECORDING POINTS, INCLUDING MICROPHONE.

DRIVERPACK DIGITALLY SIGNED BY ME, TEST MODE IS UNNECESSARY.

LINK FOR DOWNLOAD
[/SPOILER]

Does anyone have a link to this version? I assume this one still supports older versions of Windows 10 / 7 and it has the features that I seek.
Filename : RealtekDriverSBCSANH3VIADS1PCEEv4SZVZEXP.exe

 

[Smikel]

No download link is working anymore, could someone please post the latest mod version for windows 7. Thanx alot.

No download link is working anymore, could someone please post the latest mod version for windows 7. Thanx alot.

@Alan Finote

 

[Peterson]

DolbyAtmos Work perfect porem o SoundBlaster Não Funciona!
Audio Codec: ALC 1150

 

[ToniM_8]

With me the same thing sometimes works sometimes not the soundblaster. @Peterson

 

[AAF Optimus]

DolbyAtmos Work perfect porem o SoundBlaster Não Funciona!
Audio Codec: ALC 1150

PLEASE READ THESE INSTRUCTIONS