Realtek Modded Audio Driver for Windows 10/11 - Only for HDAUDIO

[DriVE654]

@Alan Finote hello, still not getting Sonic Audio to work. Please suggest which plugin in your pack is the best in your opinion for upmixing stereo to 5.1?
Many thanks!

 

[Mircosfot]

for my opinion is the best Stereo upmix:

 

[serlex]

Hello everyone! I'm new here so sorry to disturb.

I'm running windows10 latest edition may update 2020 x64, with a AL1150 board and I tried installing WINDOWS 10 15063 ONWARDS (STANDARD) version.... everything seems fine but I don't have the realtek control panel anymore so I cannot configure my 5.1 setup (3 3,5mmm cables) ..... how can I fix this?

also... in which cases should I install DCH over standard?

 

[AAF Optimus]

I'm running windows10 latest edition may update 2020 x64, with a AL1150 board and I tried installing WINDOWS 10 15063 ONWARDS (STANDARD) version.... everything seems fine but I don't have the realtek control panel anymore so I cannot configure my 5.1 setup (3 3,5mmm cables) ..... how can I fix this?

Check your record. Open REGEDIT, navigate to "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run" and check for the presence of the value "RTHDVCPL". Send a print of the window.

 

[serlex]

Check your record. Open REGEDIT, navigate to "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run" and check for the presence of the value "RTHDVCPL". Send a print of the window.

First of all, thank you so much for fast response...from the creator himself

I can confirm there is NO "RTHDVCPL

 

[AAF Optimus]

First of all, thank you so much for fast response...from the creator himself

I can confirm there is NO "RTHDVCPL

Now, open Realtek Audio Device Tweak and click this button:
Send the catch

 

[Sparowe]

Ok, so I totally boinked something up and I can't for the life of me figure out how to reverse it. I've tried going back to the beginning of the installation process multiple times and still no luck. What happened was I accidentally executed a script for powershell and it removed/uninstalled everything related to the realtek uwp control panel. I'll upload the script for someone to look over.

Now, before I fudged that up I had actually gotten realtek installed with the two added menus in it's control panel for dolby home theater and dts connect as well. I had also gotten a-volute sound blasterX 720 installed and working just fine.

I attached the script I had mentioned. Hope I can fix this. In all honestly though, while I did like the "720" I was more concerned with getting Sonic Studio 3 working. I actually have a "ROG G20CB" Asus desktop While I've been waiting on how to figure that one out I've actually been seeing if there is a way to use the "Asus ROG" user interface for the HDA Manager instead of the interface from the early nineties? That's a joke lol but I understand it may be possible to by using "resource hacker" and basically swapping out the interface elements? I wouldn't mind doing it myself if somebody could point me in the right direction and what folders to edit and swap. I tried looking through all the options from the "tweaker/testing" program that I used to unlock the DTS and Dolby menus. There were just so many options I didn't want to mess up another installation.

Well thanks for taking a look, if and when anyone gets around to it at least.

 

[serlex]

Now, open Realtek Audio Device Tweak and click this button:
Send the catch
View attachment 159206

nothing seemed to happen when I clicked on the button.

 

[AAF Optimus]

nothing seemed to happen when I clicked on the button.

Go to "%programfiles%\Realtek\Audio\HDA" and try to run "RAVCpl64.exe" or "RtkNGUI64.exe"

 

[klogg4]

Alan Finote, how do I use equalizer in Sonic Studio III with all possible presets? I'm interested because there's a preset for headphones I have, but the problem is... well, I described it on the bottom of the last page =)

 

[serlex]

Go to "%programfiles%\Realtek\Audio\HDA" and try to run "RAVCpl64.exe" or "RtkNGUI64.exe"

can't do it... folder is empty :-/

for clarification. everything else seems installed. nahimic 3is there, sound blaster connect 2 too.

i have been able to configure the speakers using windows's native sound device panel, but I don't have the realtek one.

 

[serlex]

Download this MSI, open it. It will perform the file copy operation and add the necessary values in the registry for initialization with the system.

can't download it I get forbidden access.

thanks again for all your help! (maybe use you send it or something similar?)

 

[AAF Optimus]

can't download it I get forbidden access.

thanks again for all your help! (maybe use you send it or something similar?)

It's ok. I will reupload it by another means. Wait...

It's ok. I will reupload it by another means. Wait...

Download this MSI, open it. It will perform the file copy operation and add the necessary values in the registry for initialization with the system.

 

[serlex]

It's ok. I will reupload it by another means. Wait...


Download this MSI, open it. It will perform the file copy operation and add the necessary values in the registry for initialization with the system.

ok! so it is installed and it auto boots with the computer but it's not working (as in, I can't configure anything on it

 

[AAF Optimus]

ok! so it is installed and it auto boots with the computer but it's not working (as in, I can't configure anything on it

See the spoiler "IF NO EFFECTS ARE WORKING, EVEN THE REALTEK ONES?" at the beginning of this thread.

 

[serlex]

See the spoiler "IF NO EFFECTS ARE WORKING, EVEN THE REALTEK ONES?" at the beginning of this thread.

Thank you! unfortunately it didn't work :-/ so I was trying to uninstall/ re install but I'm in a loop.

I uninstalled from "remove Programs" but it did not disappear although is not let me uninst all it again because the folder AAFMod does not exist anymore..... but I cannont re-install because the installer believes I still have it :-/

Is there a way for the installer to skip that check?

I'm so sorry to bother you :-/

 

[AAF Optimus]

Thank you! unfortunately it didn't work :-/ so I was trying to uninstall/ re install but I'm in a loop.

I uninstalled from "remove Programs" but it did not disappear although is not let me uninst all it again because the folder AAFMod does not exist anymore..... but I cannont re-install because the installer believes I still have it :-/

Is there a way for the installer to skip that check?

I'm so sorry to bother you :-/

Go to "%programdata%\AAFMod\Files" and verify content.

 

[antonkaz]

Hi Alan. Please make modded driver with all modificiations know to you.
Thanks

 

[serlex]

Go to "%programdata%\AAFMod\Files" and verify content.

folder does not exist. the uninstaller deleted it

But the program still appears installed, so I cannot uninstall it nor reinstall it :-/

 

[Nmitsia]

Hello!

Running on MSI Z97 Gaming 3 - Analog output to 5.1 - Windows 10 latest. Creative SB Connect will not run at all . Also 2.0 sources used to play on 5.1, after the latest updates they will not. Tried uninstalling many times. Removed all drivers with DDU, as well as manually via Device Manager. Also tried different installations with AAF Bus Driver installed or not (keeping the vanilla bus driver) to the same result. 5.1 in 5.1 movies in VLC play fine. 2.0 to 5.1 movies - music (Spotify) and games such as "Escape from Tarkov" will not. Furthermore tried manually deleting before installation all coresponding directories (Creative/A-Volute/Dolby) to no effect.

It must be something with Creative SB Connect 720 as it will not run at all. As i remember 4 versions before of your driver pack, down-mixing - up-mixing was handled by Creative. This must be the case. Some incompatibility between those two (Creative & another component of the driver pack).

Attached, you will find my system info.

Also at this point i would like to thank you for the marvelous work you do in bringing us new experience!

Thank you very much for your support and the enormous amount of work you put into the project. You should be hired by a third party such as Dolby.

Stability now is the only factor of improvement and you actually do pretty well!

@Alan Finote any idea on how to enable Creative SB Connect 720?

 

[Vacintosh]

it was not again

View attachment 158980


there is no sound from the headphone now




now okeyyyy )))))))))))))))

thanks @Alan Finote

View attachment 158989View attachment 158990

good now but

I can not see "Headphone impedance sensing"
View attachment 158997View attachment 158998

he Alan
what can we do about it?

“”"Headphone impedance sensing"“”

 

[Bagger1113]

Hi!

I've got problem. I've installed the mod, and the the SoundBlaster app and the Sonic Studio are not working. Dolby Atmos is working perfectly. So I don't know what is the problem. I've got a HP EliteDesk 800 G1 Tower, with ALC221. What should I do?

Thanks in Advance!

 

[Corellon]

Wondering if someone can help I've been trying to install the latest version (6.0.8960.1) and have experienced some issue getting DTS Interactive to work.

If I use the default APO I have as the spoiler on page one stated set the tweaker to the correct values and DTS interactive shows up as and I can select however on the DTS page only DTS:Neo is an option and it is non-functional.

Also when I try to run Sonic Studio 3 I now get the system is not supported or invalid driver error before it closes, is it not compatible with the default APO?

Thanks

 

[SeaDaddy]

Hello, I have an Asus Z170I motherboard which as an ALC1150 realtek chipset in it (I believe). I use a pair of Sony wireless headphones that can decode DTS and Dolby Digital 5.1 sources.

I would like to get both DTS and Dolby working from the toslink out but I am confused about what to install.

1. Should I just install the DCH version of Alan's or just the Standard Version?

2. Would it be better to just patch the 2.82 official drivers and only use those?

3. Are any of the Nahimic or Atmos things needed for me?

Sorry for all the questions but I hope someone can help me out!

Thanks

 

[capitansolo]

Hi!
Im new here and found this site after looking for windows 10 realtek drivers for a MB Asus p8p67le with Realtek ALC892 codec because i had installed generic drivers now.
My problems is that on w10 treble sounds seems to be more shy while bass sound kills others sounds ingame, and i didnt have that problem in windows 7 with original drivers from realtek.
Found your drivers but i dont have clear the purpose of this modded driver and didnt find any explanation, so please, allow me few questions:

1. WIll this drivers work for my ALC892?
2. Can i make the sounds "more brilliant" as i see in the NAHIMIC 3 image?
3. What are the advantages/purpose of this drivers?

Thanks fo your help and your patience with new people!
Regards!