- Joined
- Jul 30, 2019
- Messages
- 2,896 (1.56/day)
System Name | Not a thread ripper but pretty good. |
---|---|
Processor | Ryzen 9 5950x |
Motherboard | ASRock X570 Taichi (revision 1.06, BIOS/UEFI version P5.50) |
Cooling | EK-Quantum Velocity2, EK-Quantum Reflection PC-O11, D5 PWM, EK-CoolStream PE 360, XSPC TX360 |
Memory | Micron DDR4-3200 ECC Unbuffered Memory (4 sticks, 128GB, 18ASF4G72AZ-3G2F1) + JONSBO NF-1 |
Video Card(s) | XFX Radeon RX 5700 & EK-Quantum Vector Radeon RX 5700 +XT & Backplate |
Storage | Samsung 2TB & 4TB 980 PRO, 2TB 970 EVO Plus, 2 x Optane 905p 1.5TB (striped), AMD Radeon RAMDisk |
Display(s) | 2 x 4K LG 27UL600-W (and HUANUO Dual Monitor Mount) |
Case | Lian Li PC-O11 Dynamic Black (original model) |
Power Supply | Corsair RM750x |
Mouse | Logitech M575 |
Keyboard | Corsair Strafe RGB MK.2 |
Software | Windows 10 Professional (64bit) |
Benchmark Scores | Typical for non-overclocked CPU. |
For the past few days I've suddenly starting having my 2nd and 3rd NVMe drives disconnect in Windows 10. The cause was a bit of a mystery. Both drives are 970 Evo Plus 2TB on the 2nd and 3rd NVMe slot of my X570 Taichi. One is fairly used (27TB written) and the other is lightly used (3.5TB written). I'm not RAID-ing them in any way.
Symptoms
After taking the system apart I noticed the chipset heatsink was loose and tightened the rear screws for the heatsink ensuring good mounting pressure with the thermal pad. I suspect the X570 Chipset might have been overheating although the sensor usually reports the chipset temp is usually between 50c-58c.
Symptoms
- File copy fails, Windows says something to the effect of device disconnected.
- Applications using the disk might stop responding or fail operations. (VMWare, Handbrake)
- Bluetooth (per the system is actually a USB device) periodically disconnects/reconnects. (discovered this via USB device viewer after being bothered by dinging sounds every few minutes)
- event id 1, WHEA-Logger
- A fatal hardware error has occurred. A record describing the condition is contained in the data section of this event.
- event id 11, stornvme
- The driver detected a controller error on \Device\RaidPort3.
- The driver detected a controller error on \Device\RaidPort4.
- event id 50, ntfs (ntfs)
- {Delayed Write Failed} Windows was unable to save all the data for the file
- event id 51, disk
- An error was detected on device \Device\Harddisk1\DR1 during a paging operation.
- An error was detected on device \Device\Harddisk0\DR0 during a paging operation.
- event id 129, stornvme
- Reset to device, \Device\RaidPort3, was issued.
- Reset to device, \Device\RaidPort4, was issued.
- event id 140, Ntfs (Microsoft-Windows-Ntfs)
- The system failed to flush data to the transaction log. Corruption may occur in VolumeId: D:, DeviceName: \Device\HarddiskVolume4.
After taking the system apart I noticed the chipset heatsink was loose and tightened the rear screws for the heatsink ensuring good mounting pressure with the thermal pad. I suspect the X570 Chipset might have been overheating although the sensor usually reports the chipset temp is usually between 50c-58c.