Ryzen Owners Zen Garden

[freeagent]

I'm happy with this.

View attachment 183114

AMD Ryzen 5 3600 @ 4402.12 MHz - CPU-Z VALIDATOR

[1v6vwk] Validated Dump by Maenad (2021-01-09 01:22:23) - MB: MSI B450M MORTAR MAX (MS-7B89) - RAM: 16384 MB

valid.x86.fr

Stability? Testing it atm, as I use my PC most for gaming, what's the best way to test stability than... gaming?

Awesome man! Just gotta give it the beans sometimes

I've been playing around a little bit too, mostly with no CPU fan and low speed case fans.. except my TY because its not too loud.. This is pretty much the speed I ran my 3770K at with this cooler and no fan, with roughly the same temperature. At 4500 on the i7 it would hit the mid 80s.

 

[INSTG8R]

 

[Space Lynx]

View attachment 183135

what are your settings at for the CPU to be stable at 5.1???? wow

 

[biffzinker]

what are your settings at for the CPU to be stable at 5.1???? wow

No chance all cores are cruising along at 5.1 GHz loaded. I would expect short bursts to 5.1.

 

[freeagent]

No chance all cores are cruising along at 5.1 GHz loaded. I would expect short bursts to 5.1.

Indeed, looking at L3 bandwidth I would say a lot of that test was run with just a few threads.

Its a fast CPU though, look at his L2 latency

 

[Ruru]

Awesome man! Just gotta give it the beans sometimes

I've been playing around a little bit too, mostly with no CPU fan and low speed case fans.. except my TY because its not too loud.. This is pretty much the speed I ran my 3770K at with this cooler and no fan, with roughly the same temperature. At 4500 on the i7 it would hit the mid 80s.

View attachment 183133

4.5 was so unstable that even opening cpuz crashed But yeah, 4.4 feels totally stable and I'll drop the vcore every boot step by step to find the optimal minimum stable vcore. I could try 4425, 4450 or 4475 tho also.. why not when I get 4400 truly stable at minimal voltage.

 

[freeagent]

4.5 was so unstable that even opening cpuz crashed But yeah, 4.4 feels totally stable and I'll drop the vcore every boot step by step to find the optimal minimum stable vcore. I could try 4425, 4450 or 4475 tho also.. why not when I get 4400 truly stable at minimal voltage.

For sure man, why not? I feel 4500 is on the edge for mine too, but I'm still not entirely sure what the max voltage I should use is, other than 1.3375 is about all I'm willing to feed as core temps can approach 80-85c on certain loads. Other than that it runs fine.

 

[Mussels]

This isn't the same as what i got where all cores would bouce over 5050, but its close enough i dont care

I wonder if its changes to the various settings in the BIOS, like running a negative offset curve (i've got it at -5 all core) has changed how they boost now

 

[tabascosauz]

This isn't the same as what i got where all cores would bouce over 5050, but its close enough i dont care

I wonder if its changes to the various settings in the BIOS, like running a negative offset curve (i've got it at -5 all core) has changed how they boost now

Curious as to see what sort of Core Clocks you're seeing with Snapshot Polling enabled in settings, and under Discrete Clocks. My 4650G is pretty accurate but my 3700X is way off between the "Core Clock" AMD likes to advertise and what's actually going on in those cores. Wanting to see if I can expect any improvements in silicon honesty when my 5000 chip finally shows up

 

[Mussels]

Curious as to see what sort of Core Clocks you're seeing with Snapshot Polling enabled in settings, and under Discrete Clocks. My 4650G is pretty accurate but my 3700X is way off between the "Core Clock" AMD likes to advertise and what's actually going on in those cores. Wanting to see if I can expect any improvements in silicon honesty when my 5000 chip finally shows up

wheres this snapshot setting hiding?

 

[tabascosauz]

wheres this snapshot setting hiding?

first page in the program-wide settings menu, you have to right click the tray icon

 

[biffzinker]

wheres this snapshot setting hiding?

Launch, and check Summary-only

Right click tray icon for Settings

 

[AusWolf]

That's ok, I think for now I have given up on an all core oc, it just doesn't seem to be worth it. Im ok with it. As for my clocks not dropping to under 1ghz, I'm pretty sure that's the chipset drivers I'm lacking. 170-180w is crazy man! My rig is sipping on 78w @ the wall right now, and loaded (minus gpu) sips on about 140w, that could change though.. It depends on what my settings are. But I think it consumes less then my 3770K for the most part, if not the whole part..

Well.. she’s running! I should probably load it up with something and see how she does. It’s still running pretty cool.. I wonder if I should turn off a fan or two..

Nah, that's just the ASUS Optimizer kicking in. With it disabled, and letting PBO do its thing with everything on Auto, it never exceeds 130 W (CPU PPT), and the H100i Platinum keeps it around 65-67 C. With an all-core clock of 3.8-3.9 GHz (which as I said, I never use just yet), and single core clocks varying between 4.6-4.9 GHz with occasional jumps to 5 GHz, I couldn't be happier.

Nice clean setup, btw. I just wonder how much air gets through the front panel.

 

[harm9963]

New Asus X470 Prime Pro - beta BIOS. 5821

 

[freeagent]

Nah, that's just the ASUS Optimizer kicking in. With it disabled, and letting PBO do its thing with everything on Auto, it never exceeds 130 W (CPU PPT), and the H100i Platinum keeps it around 65-67 C. With an all-core clock of 3.8-3.9 GHz (which as I said, I never use just yet), and single core clocks varying between 4.6-4.9 GHz with occasional jumps to 5 GHz, I couldn't be happier.

Nice clean setup, btw. I just wonder how much air gets through the front panel.

Thanks man, I appreciate it. Lots of air is going through the front! Though my fans are running at 7v.. a lot more moves at 12v

 

[AusWolf]

Thanks man, I appreciate it. Lots of air is going through the front! Though my fans are running at 7v.. a lot more moves at 12v

Oh, so you have nothing in front of the fans! I thought you had a solid glass panel there.

I also see you use no dust filters, just like myself on my Aero One Mini.

 

[freeagent]

Oh, so you have nothing in front of the fans! I thought you had a solid glass panel there.

I also see you use no dust filters, just like myself on my Aero One Mini.

No need for filters, they just get in the way.. so does the mesh

I also have a Metro Data Vac, and I'm not afraid to use it

 

[harm9963]

About the same score , but a whole lot cooler and less power
210 watts vs 265 watts and 87c vs 75 c
New BIOS 5821 BETA , windows and chipset reinstalled !

 

[Durvelle27]

Such a beautiful sight

 

[freeagent]

A little jelly here..

 

[kapone32]

It works OK I suppose.. during the all core it sat at 4350-4325. Single core ramped right up though.. Im a little curious how it would react if I turned off my front 120s and just left the rear 120 and front 140 running.

View attachment 183068

Edit:

Ran a little Real Bench too to build a little more internal heat.

View attachment 183077

He mentioned trying out passive cooling in the show off tech purchase thread. Front of the case looks open with three fans blowing through.

I remember installing a CPU and I finished the build but for got to attach the CPU fan on the heatsink. I remember thinking the heatsink was garbage as my CPU temp was 77 C. As soon as I put a fan on it fell to 35 C.

 

[biffzinker]

A little jelly here..

If you ask nicely he might sell you his 5600X.

 

[AusWolf]

About the same score , but a whole lot cooler and less power
210 watts vs 265 watts and 87c vs 75 c
New BIOS 5821 BETA , windows and chipset reinstalled !

That's some awesome cooling you've got there. My 5950X would be toast with 210 Watts.

 

[harm9963]

That's some awesome cooling you've got there. My 5950X would be toast with 210 Watts.

ppt 200 tdc 200 edc 130 / -30 use AMD OC menu , not PBO

 

[djisas]

This might've been answered before, but here it goes.
People with Taichi X570, is the bios 3.8 worth it, I'm running 3.61.