Processor | AMD R7 5800X3D |
---|---|
Motherboard | Asus Crosshair VIII Dark Hero |
Cooling | Thermalright Frozen Edge 360, 3x TL-B12 V2, 2x TL-B12 V1 |
Memory | 2x8 G.Skill Trident Z Royal 3200C14, 2x8GB G.Skill Trident Z Black and White 3200 C14 |
Video Card(s) | Zotac 4070 Ti Trinity OC |
Storage | WD SN850 1TB, SN850X 2TB, SN770 1TB |
Display(s) | LG 50UP7100 |
Case | Fractal Torrent Compact |
Audio Device(s) | JBL Bar 700 |
Power Supply | Seasonic Vertex GX-1000, Monster HDP1800 |
Mouse | Logitech G502 Hero |
Keyboard | Logitech G213 |
VR HMD | Oculus 3 |
Software | Yes |
Benchmark Scores | Yes |
I think I remember that post at OCF.I might have been able to do that on the non-"M" Athlon XP 3000+ that I had, but wouldn't be a big deal if I needed 1.85V or 1.825V. Those were from the days when 2.6 Ghz was a record-smashing number for AMD!
And the 2004 Asus A7N8X-X, where I did the Barton 3000+ OC'ing, had caps that suddenly were found to be bulging and leaking like Mount Vesuvius one day in 2015! (or 2014)
Because Chemi-con, a well known high quality capacitor manufacturer, unfortunately has an extremely high defect rate with their KZG series. Ones manufactured in 2004, (likely 2005 as well) were possibly the worst batch! They seem most likely to bulge and leak on motherboards made in 2004 and 2005!
All that old-school Athlon-related stuff, unfortunately is gone! Back in 2012, I didn't recall the caps being visibly bad!
Yes they do!Xeon rules!![]()
System Name | Dual Socket HP z820 Workstation |
---|---|
Processor | Twin Intel Xeon E5 2673 v2 OEM processors (thats a total of 16C/32T) |
Motherboard | HP Dual Socket Motherboard |
Cooling | Stock HP liquid cooling |
Memory | 64GB Registered ECC memory kit (octal channel memory on this rig) |
Video Card(s) | MSI RX 5700 XT Gaming X 8GB |
Storage | 2 x 512GB SSD in raid 0 |
Display(s) | Acer 23" 75Hz Gaming monitors 1080P x2 |
Case | Brushed Aluminium |
Audio Device(s) | Integrated (5.1) |
Power Supply | HP 1125W Stock PSU |
Mouse | gaming mouse |
Keyboard | Dell |
Software | Windows 10 Pro |
I liked my barton core 3000+, which ran at 400Mhz FSB and 2.1GHz(or 2.2 cant remember).Athlon XP realistically competed with Willamette, basically Pentium 4, but quite lowly clocked. They topped out at just 2GHz or maybe 2.2GHz. Those chips were responsible for all that "Pentium III is faster than Pentium 4" drama initially and I can't imagine Athlon XP not beating it. Phil did benches and Athlon XP could go against 3GHz Pentium 4.
Not to mention that Athlon XPs overclocked really well and Athlon XP had mods like this (please turn down your volume):
2.1ghz likely. There were two versions of the Barton 3000+, one that ran on the 200mhz FSB(2.1ghz) and one that ran at 166mhz FSB(2.166ghz)I liked my barton core 3000+, which ran at 400Mhz FSB and 2.1GHz(or 2.2 cant remember).
System Name | Dual Socket HP z820 Workstation |
---|---|
Processor | Twin Intel Xeon E5 2673 v2 OEM processors (thats a total of 16C/32T) |
Motherboard | HP Dual Socket Motherboard |
Cooling | Stock HP liquid cooling |
Memory | 64GB Registered ECC memory kit (octal channel memory on this rig) |
Video Card(s) | MSI RX 5700 XT Gaming X 8GB |
Storage | 2 x 512GB SSD in raid 0 |
Display(s) | Acer 23" 75Hz Gaming monitors 1080P x2 |
Case | Brushed Aluminium |
Audio Device(s) | Integrated (5.1) |
Power Supply | HP 1125W Stock PSU |
Mouse | gaming mouse |
Keyboard | Dell |
Software | Windows 10 Pro |
Yes, I was very important to not get the red headed stepchild (166mhz FSB) at that time, lol. The 400FSB A7N8X was a great board!2.1ghz likely. There were two versions of the Burton 3000+, one that ran on the 200mhz FSB(2.1ghz) and one that ran at 166mhz FSB(2.166ghz)
System Name | KHR-1 |
---|---|
Processor | Ryzen 9 5900X |
Motherboard | ASRock B550 PG Velocita (UEFI-BIOS P3.40) |
Memory | 32 GB G.Skill RipJawsV F4-3200C16D-32GVR |
Video Card(s) | Sapphire Nitro+ Radeon RX 6750 XT |
Storage | Western Digital Black SN850 1 TB NVMe SSD |
Display(s) | Alienware AW3423DWF OLED-ASRock PG27Q15R2A (backup) |
Case | Corsair 275R |
Audio Device(s) | Technics SA-EX140 receiver with Polk VT60 speakers |
Power Supply | eVGA Supernova G3 750W |
Mouse | Logitech G Pro (Hero) |
Software | Windows 11 Pro x64 23H2 |
2.1 is stock! That was a high stock clock for its time! It was the 166 Mhz FSB version. I'm not aware of a 200 Mhz FSB version for less than the 3200+, IIRC.I liked my barton core 3000+, which ran at 400Mhz FSB and 2.1GHz(or 2.2 cant remember).
But I do remember, with very low latency memory the platform had very low latency. It fact was more snappy than any single core processor I remember including Pentium 4.
They made the 3000+ 200FSB version.I'm not aware of a 200 Mhz FSB version for less than the 3200+, IIRC.
System Name | Rainbow Sparkles (Power efficient, <350W gaming load) |
---|---|
Processor | Ryzen R7 5800x3D (Undervolted, 4.45GHz all core) |
Motherboard | Asus x570-F (BIOS Modded) |
Cooling | Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate |
Memory | 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V) |
Video Card(s) | Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W)) |
Storage | 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2 |
Display(s) | Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144) |
Case | Fractal Design R6 |
Audio Device(s) | Logitech G560 | Corsair Void pro RGB |Blue Yeti mic |
Power Supply | Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY) |
Mouse | Logitech G Pro wireless + Steelseries Prisma XL |
Keyboard | Razer Huntsman TE ( Sexy white keycaps) |
VR HMD | Oculus Rift S + Quest 2 |
Software | Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware! |
Benchmark Scores | Nyooom. |
OC'ers hated it, we wanted high multis and low FSBThey made the 3000+ 200FSB version.
![]()