Which ATX power supply

[nomdeplume]

Fair question, I assume there is a price premium for modular and I'd rather put the money elsewhere.

More points of failure?

The price premium is aftermarket cables (consumer market) and the fact it is cheaper to make a cable on an industrial scale than it is build them into a unit on site.

The two options here are face up to what is currently in the Western retail sector or about face and delve into the world of Asian online sites with their opaque supply channels.
Option 1.x.x is find a workstation PSU you as an individual can attain and modify it to purpose as required.

 

[Bobaganoosh]

If you'd consider the idea of plugging the cables in and leaving them there, I would recommend you consider:
Be quiet! Pure Power 12 M 650W ATX3.0

Seasonic FOCUS V3 GX-750 ATX 3.0 (linked earlier)

Otherwise, the best non-modular one out there looks to be the gx3 Thermaltake linked earlier. This is a situation where most people looking for high quality supplies are demanding modular, so the companies making them have just gone fully in that direction, leaving non-modular options limited in the high-quality tier.

 

[Shrek]

I seem to recall a picture of melted modular connectors, so I am reticent to take this route.

 

[Lost_Troll]

I just realized that 16V 2200uF solid-state capacitors exist (10mm x 20mm) and I could rebuild my old EVGA supply with them.

I would not waste the time or money as there are other components that can and will go bad that you will more than likely be able to replace do to the soldering skills and or obsolescence.

I would look at one of the brands listed in the post and buy it.

 

[dgianstefani]

I seem to recall a picture of melted modular connectors, so I am reticent to take this route.

A plane crashed once so I've decided to never fly.

 

[xtreemchaos]

I'm still not convinced about modularity, but that doesn't make me right.
Lost cables, non-standard pin-out makes me reluctant.

just plug them all in and pretend there non modular. the secret is safe with us .

 

[Caring1]

However, I'm still not convinced about modularity, but that doesn't make me right.
Lost cables, non-standard pin-out makes me reluctant.

To prevent that, retain the box and keep the spare cables in that box so you know which PSU they belong to.

 

[Assimilator]

Okay I'm out. We've given you multiple solutions to the stupid non-problem that you've invented, including the most obvious one, and you're still coming up with reasons as to why those solutions aren't suitable. I should have realised this was a waste of time when you mentioned that you recapped a shitty PSU because you somehow believe that fixes every other problem with the design, as opposed to doing what a sane person would and just buying a better unit.

 

[Chomiq]

So um real question.

What exactly is stopping you from plugging all of the modular cables into the unit.

And installing it in your system?

Then it behaves exactly as a non-modular power supply.

Better questions - what's keeping the OP from simply storing the extra cables in the PSU box?

 

[Shrek]

Thanks to all here in helping me figure out which power supply type is right for me, now I need to hit the reviews to really pin it down.

 

[bug]

Which ATX power supply? fortunately, I have a few requirements to narrow the field

• non-modular (not even semi-modular)
• no RGB
• 5-year warrantee or more

the non-modular requirement would seem to exclude 80 Plus Platinum and Titanium
(so Gold is fine) and puts me in the 600-800W range and excludes eco-mode.

Sure, I can get a 650W unit with 5-year warrantee for $35, but I am after quality.

The unit I am replacing was 80+ Gold, 600W but had no filtering on the mains.

The unit I am using presently is an EVGA 500W1
EVGA 500W Review - Another One (PSU) Bites the Dust (youtube.com)
but the version with uncooled bridge rectifier.

Seeing as everything toady is modular, get a modular PSU and glue the cables in place

 

[basco]

Netzteile & USV Netzteile mit Leistung ab 650W, 80 PLUS Zertifikat: 115V/230V [Quelle: 80 PLUS]: ab 80 PLUS Gold, Kabelmanagement: fest, Herstellergarantie: ab 5 Jahre Preisvergleich Geizhals EU

Preisvergleich und Bewertungen für Netzteile & USV Netzteile mit Leistung ab 650W, 80 PLUS Zertifikat: 115V/230V [Quelle: 80 PLUS]: ab 80 PLUS Gold, Kabelmanagement: fest, Herstellergarantie: ab 5 Jahre

geizhals.eu

 

[Shrek]

Now I need to delve deeper and figure out

• Fan with fluid-dynamic bearings
• 40°C operating temperature
• Individually regulated 12V, 5V, 3.3V

things the shops tend not to list.

Reviews | TechPowerUp

 

[P4-630]

Do you expect your PSU to last/use for 20 years!?...

 

[Shrek]

I would suppose that ATX12VO supplies will be the future.

 

[P4-630]

I mean, just get a PSU with 10~12 years warranty and be done with it lol!!..

 

[A Computer Guy]

Quite the opposite, but I don't want to waste money; I was almost going to add

• Japanese capacitors
• Fan with fluid-dynamic bearings

I could add

• fan noise
• coil whine

Shrek, what do you think of this? If you need more power you can even chain them together. (yes I'm going down the rabbit hole just a moment with this suggestion. )

HDPLEX 500W GaN AIO ATX Power Supply

Free Shipping Worldwide Stock Status USA : In Stock Germany : In stock Asia : In Stock UK : In Stock

hdplex.com

 

[Shrek]

Very interesting, but my case takes an ATX size supply.

 

[Bill_Bright]

I seem to recall a picture of melted modular connectors, so I am reticent to take this route.

Come on, Shrek. This is getting to be a bit anal now. "Seem to recall"? "A" picture?

Like there has never ever been a hard-wired power supply that went up in smoke and fire?

Okay I'm out. We've given you multiple solutions to the stupid non-problem that you've invented, including the most obvious one, and you're still coming up with reasons as to why those solutions aren't suitable.

A bit harsh, but I agree. I'm out too.

 

[Shrek]

I mean, just get a PSU with 10~12 years warranty and be done with it lol!!..

Part of the fun for me is not just the purchase but the figuring out.

 

[eidairaman1]

Thanks to all here in helping me figure out which power supply type is right for me, now I need to hit the reviews to really pin it down.

Why not fab your own cables with heavier gauges and directly solder to the pcb if you are concerned about melted modular connectors on the psu side?

It is a solution...

 

[Shrek]

Just found out that 16V 3300μF solid-state capacitors exist (10mm x 22mm) and these should beat the best electrolytic capacitors, and since this is usually a power supply's weak point (along with the fan) I wonder if going 100% solid for the secondary capacitors will be an option in the future.

 

[dirtyferret]

Why not fab your own cables with heavier gauges and directly solder to the pcb if you are concerned about melted modular connectors on the psu side?

It is a solution...

Have open world survival games taught you nothing? All you need is a rock and some wood, you will have a fully functioning SMT line up and running within a day. You can build your won PSU after that.

 

[Shrek]

Not to be a pain or in any way ungrateful, but I was hoping for something a bit more than

• PURE POWER 11
• TOUGHPOWER GX3 Gold 850W
• FOCUS GX ATX 3.0
• Be quiet! Pure Power 12 M 650W ATX3.0

perhaps the reason these might be a good choice (voltage regulation or the like).

 

[eidairaman1]

Have open world survival games taught you nothing? All you need is a rock and some wood, you will have a fully functioning SMT line up and running within a day. You can build your won PSU after that.

It's Magic man