Mips coolermaster mystique *Updated*

Posted:
April 30th 2007
Updated:
Viewed:
12,821 times
Rating:
Poor (3.0)
Voting Graph 1 votes total
Submit vote:
Please register on the forums & login to vote.
Key Features:
AMD CPU AMD Graphics Water-cooled
System Specs:
  • AMD Opteron 165 @ 2.7ghz
  • 2GB PC3200 DDR
  • ATI HD 2900XT 512MB
  • Asus A8N-SLI Premium Motherboard
  • 2x Seagate 7200.10 320GB Drives
  • Dell 24" Widescreen
  • Logitech G25 race wheel )
* Updated. New HD 2900XT strapped to an aquagratix water block. Pretty impressed by it, even though it doesn't directly cool the mem on the other side, it does seem to indirectly by cooling the whole card. The ramsinks on the other side barely get warm under load. Much quieter than the air cooler :)                                                                                             The original contents where from an old koolance case, I felt like migrating everything across into somthing more sleek looking, which required a bit of modification of the mystique as you can see in the pix.
Add your own comment

8 Comments on Mips coolermaster mystique *Updated*

#1
caveman_1990
I can see something wrong with the placement of your radiator. You placed it on the bottom of your case which would be unable to cool down. Hot air rise up >_<. pretty good case thou 7/10
Posted on Reply
#2
MIP_1983
caveman_1990I can see something wrong with the placement of your radiator. You placed it on the bottom of your case which would be unable to cool down. Hot air rise up >_<. pretty good case thou 7/10
There are two radiators. Its the black ice radiator on the back that does most of the cooling, the one at the bottom does a minimal amount of passive cooling (with it just being outside the case, the outside air actually does quite a decent job of cooling it there), there's a small amount of gap above it to allow air to rise. I know the ideal placement would be at the top, but that would ruin the aesthetics of the case. I still get 33C idle and 37C on load, and its very quiet, so there's no real need for me to move the 2nd rad.
Posted on Reply
#3
caveman_1990
MIP_1983There are two radiators. Its the black ice radiator on the back that does most of the cooling, the one at the bottom does a minimal amount of passive cooling (with it just being outside the case, the outside air actually does quite a decent job of cooling it there), there's a small amount of gap above it to allow air to rise. I know the ideal placement would be at the top, but that would ruin the aesthetics of the case. I still get 33C idle and 37C on load, and its very quiet, so there's no real need for me to move the 2nd rad.
That is a pretty good temperature. IMO you would not need the second radiator just like say. You would take away the second raditator because it only cause your water system to flow slower. Take it out and see what the tempature is and if it is not better than put it back to the orginal seet up.

Anyway when you say its 33*C idle whatis the room temperature?
I am getting 18*C idle with 266x9=2400MHz and room temp of 17.5*C using TAT
Posted on Reply
#4
MIP_1983
caveman_1990That is a pretty good temperature. IMO you would not need the second radiator just like say. You would take away the second raditator because it only cause your water system to flow slower. Take it out and see what the tempature is and if it is not better than put it back to the orginal seet up.

Anyway when you say its 33*C idle whatis the room temperature?
I am getting 18*C idle with 266x9=2400MHz and room temp of 17.5*C using TAT
The room temp is about 22C. It would be interesting to see what it'd be like without the rad underneith, but draining and refilling is a pain in the arse unfortunatly. I think logically it must be disapaiting some heat, simply by me being able to feel heat radiating from it with my hand.
Posted on Reply
#5
MIP_1983
I can't beleive somone gave it 5/10, :( Bastard! No you're entitled to your oppinion of course.

Come on people, vote!
Posted on Reply
#6
cronydog
Hey, can I have that wheel and pedals??/ LOL, Nice work!!!
Posted on Reply
#7
tkpenalty
pretty nice but... the case seems very cramped.
Posted on Reply
#8
MIP_1983
*Updated*

Is there a way when you update your case mod post for it to bump back up on the main Gallery page ?

I swear some people's cases bump back up when they get updated, or am I imagining things?
Posted on Reply
Nov 30th, 2024 10:31 EST change timezone

New Forum Posts

Popular Reviews

Controversial News Posts