Abkoncore today introduced the T750G SYNC series of ATX full-tower cases. The lineup includes two variants based mainly on the pattern of their ARGB LED lighting elements, V1 and V2. The V1 variant features tiny streaks of lighting that make up polygonal shapes, such as the trapezoid along the front-panel, and the triangle at the side; while the V2 variant features a pattern made up of ASCII characters that can be made to resemble code from "The Matrix." Tempered glass makes up the front- and left-side panels on both the variants, which are structurally identical to each other. The mid-tower comes with 7 expansion slots, and two vertical slots, including a holder for a PCIe riser (not included).

The Abkoncore T750 SYNC measures 225 mm x 400 mm x 465 mm (WxDxH). It gets its name from an included multi-channel ARGB controller module that can either be synced with your motherboard over a 3-pin header; or use its own 368 lighting presets. Ventilation options include the ability to mount either three 140 mm / 120 mm or two 200 mm fans along the front-panel; up to two 140 mm / 120 mm fans along the top; and a 140 mm / 120 mm rear exhaust. The largest radiators you can use with the case include a 420 mm x 140 mm along the front; a 280 mm x 140 mm along the top; and a 140 mm x 140 mm along the rear. Storage options include two 3.5-inch / 2.5-inch trays, and two 2.5-inch mounts. Front-panel connectivity includes two each of USB 3.x type-A and USB 2.0 type-A ports, and HDA jacks. The company didn't reveal pricing.

Abkoncore today introduced the AL700 SYNC, an ATX full-tower case characterized by an asymmetric front design. A longer design element cuts the front somewhat diagonally, right to left; while a smaller one runs left to right towards the center. One half of the case has a matte silver aluminium finish, while the other indented half appears to have ridges that conceal fan intakes. The diagonal line of indentation conceals an ARGB LED element. Both the right- and left side panels are made of 4 mm-thick tinted tempered glass. Inside the Abkoncore AL700 SYNC, you get a conventional horizontally-partitioned layout. The upper partition with the motherboard tray serves up room for graphics cards up to 40.5 cm in length, and CPU coolers up to 17 cm in height.

The motherboard tray also features a graphics card reinforcement that can be aligned with any expansion slot. You get 8 conventional and 2 perpendicular expansion slots (riser not included). Storage features include two 3.5-inch/2.5-inch trays, and two 3.5-inch/2.5-inch drive mounts behind the motherboard tray. Ventilation includes three each of 120 mm vents along the front- and top panels, and a 120 mm rear exhaust. Three front- and one rear (pre-installed) HR120 ARGB fans are included, as is an 8-channel ARGB controller. Front panel connectivity includes two USB 3.x type-A, one type-C, and HDA jacks. Measuring 455 mm x 490 mm x 232 mm (DxHxW), the case dry-weighs 13.6 kg. The company didn't reveal pricing.

ABKONCORE is an fast rising gaming PC hardware brand with gear for serious gaming and e-sports competitions. They bring TechPowerUp readers a chance to pick up two of their best purpose-built gaming headsets at heavily discounted prices. The ABKONCORE B719 is geared toward high-end PC gaming, Macs, smartphones, and consoles that include Xbox One, Nintendo Switch, and PlayStation 4. It combines a pair of 50 mm neodymium drivers with a virtual 7.1-channel USB sound card with a plethora of game genre optimized DSPs. The USB connection also powers the headset's RGB LED lighting. Its mic offers noise-cancellation for crystal-clear squad comms.

The other headset on sale is the CH713M, geared towards competitive e-sports gaming. Much like the B719, the CH713M features a virtual 7.1-channel USB sound card, but wired to 50 mm dual-chamber drivers, and an extremely durable cable. It is optimized not just for gaming PCs, but also Macs, smartphones, Xbox One, PlayStation 4, and Switch. The included USB DAC with both headsets ensures lifelike 7.1 virtual surround that other headsets with analog 3.5 mm stereo jacks can't offer. Both the B719 and CH713M offer base rumble effects. The B719 is normally listed at USD $69.99 on Amazon, but TechPowerUp readers can use the early-bird coupon code to get it for just $48.99 (a 30% discount)! Likewise, the CH713M is priced at $59.99, but TechPowerUp readers can have it for $38.99 (35% off)! Hurry, the offer is open thru June 26, or until stocks last!

Use the coupon code B719TPUP on the following item at check-out to avail the price you see here.
Buy ABKONCORE B719 Pro Gaming Headset for $48.99

Use the coupon code CH713MTPU at check-out to avail the price you see here.
Buy ABKONCORE CH713M E-Sports Gaming Headset for $38.99

ABKONCORE has recently announced the B719M Virtual 7.1 Gaming Headset, the headset features RGB lighting, large earcups, adjustable headband, and 50 mm drivers. The headset features cross-platform compatibility with support for PC, Phone, Nintendo Switch, Playstation 4, and Xbox One. The headset cable includes an inline audio controller with volume control and mic/vibration buttons, the headset also features a USB power connector for RGB lighting effects on PC. A 3.5 mm to USB adapter is also included for PC use.

The headset features dual 50 mm neodymium drivers with an impedance of 32Ω, sensitivity of 122dB, frequency of 20Hz-20KHz, and a maximum power of 30 mW. The adjustable microphone comes with an impedance of 2.2KΩ and a sensitivity of -42dB.

ABKONCORE has recently unveiled the premium C710S Middle Tower Case. The case features a luxurious Steel/ABS/Tempered Glass design with side air vents and an RGB LED strip on the bottom. The case features a left tempered glass side panel, one included 120 mm Auto Ring Spectrum RGB fan, removable top magnetic dust filter, and removable bottom dust filter.

Case front I/O consists of 2x USB 3.0, 2x USB 2.0, HD Audio, Mic, Power, and Reset. The case can accommodate up to 7 2.5" SSDs and 2 3.5" HDDs and comes with shock-absorbing rubber pads for reduced noise and vibration. Cooling support includes space for up to 7 additional 120 mm fans, 360 mm radiator and can support 390 mm GPUs.

ABKONCORE today released the Ultra Silent Middle Tower Case S500 designed for ultra-quiet builds with a minimalistic design. The steel case features sound-insulating material on the top, front, left, and right sides to suppress vibration and noise generated inside the case, and provides perfect quietness. The case also comes with a bottom removable dust filter along with air intakes on either side of the front bezel.

The Case measures 205 x 420 x 430 mm, comes with 2 pre-installed 120 mm fans, and can accommodate ATX motherboards. Front I/O for the case consists of x2 USB 2.0, x1 USB 3.0, HD Audio, Mic, LED Control Button, power, and reset. The case can house up to 2 3.5" drives and 6 2.5" drives and has room for a further 2 120 mm fans at the front. Pricing and availability were not announced.

Abkoncore today unveiled the Cronos 450M Micro-ATX tower type case. Characterized by an asymmetric front design with a mesh intake towards the left side; the case features a tempered glass left side panel, and a filtered top exhaust. Inside, it offers a conventional horizontally-partitioned layout, with an internal fan mount right above the PSU bay.

Ventilation options for the Abkoncore Cronos 450M include three 120 mm front intakes, two 120 mm top exhausts, a 120 mm rear exhaust, and a 120 mm recirculator mount at the partition. Storage options include two 3.5-inch drive bays, and four 2.5-inch mounts. Front panel connectivity includes HDA jacks, two USB 2.0 ports, and a USB 3.0 type-A port. The case measures 197 mm x 340 mm x 405 mm (WxHxD). It is priced at USD $45.

Abkoncore unveiled the Cronos Zero Stone Noise, an ATX mid-tower case optimized for low noise. The case's various body panels are lined on the inside with acoustic dampening material, and its feet are rubberized. Ventilation on the case includes three 120 mm front intakes and a single 120 mm rear exhaust (two fans come pre-installed, one on each end of the case).

Inside, you get a conventionally laid out (horizontally partitioned) layout with the motherboard tray featuring 7 perpendicular and 2 parallel expansion slots. Storage options include two 3.5-inch drive bays, and up to six 2.5-inch mounts. The case measures 205 mm x 420 mm x 430 mm (WxHxD). Bulk pricing is listed at USD $66, although retail pricing could be about 15% higher.

Today Abkoncore announced their newest product the AL1000 SYNC a open-design full tower case. The case is constructed with a steel frame complemented with front and side tempered glass panels. The AL1000 SYNC comes with 4 200 mm Spectrum RGB fans pre-installed with full remote control through the included controller.

Front I/0 on the case consists of USB Type-C x1 / USB 3.0 x2 / HD AUDIO / MIC / LED / POWER. The case can accommodate up to a E-ATX motherboard, 10 SSDs & 2 HDDs, and dual 360 mm radiators. The case comes in both "Red Wine" and "Gray" color options with no announced pricing or availability.

Abkoncore today unveiled the T250, an ATX mid-tower case characterized by large tempered glass panels covering the front and left side; and four included ARGB LED case fans. The three front intake fans break through cutouts along the sides, and can hold on to a 360 mm x 120 mm radiator. Other ventilation options include two 120 mm top exhausts with an included dust filter.

Inside, the Abkoncore T250 features a conventional horizontally-partitioned layout. Storage options include two 3.5-inch trays that can each hold 2.5-inch drives, and three 2.5-inch mounts behind the motherboard tray. Front panel connectivity is located up top, and includes two USB 2.0 ports (standard header), one USB 3.0 type-A, and HDA jacks. Available now, the Abkoncore T250 is priced at USD $48.

Abkoncore today rolled out the T404B Hurricane tower type CPU air cooler under its Cool Storm sub-brand. Its design involves a conventional tower-type aluminium fin-stack heatsink that's ventilated by two 120 mm fans in push-pull configuration. With this, the company is claiming a thermal capacity of up to 170 W TDP, and includes support for LGA2066, LGA115x, and AM4 sockets.

The heatsink design involves a base at which four 6 mm-thick copper heat pipes make direct contact with the CPU, conveying heat through the fin-stack, which is then ventilated by the fans. Each of the two 120 mm fans takes in 4-pin PWM for their main function, spin between 800 to 1,800 RPM, pushing a little over 50 CFM of air with maximum noise output of 33 dBA. The fans feature addressable RGB lighting, and take in 3-pin ARGB input. Measuring 128 mm x 107 mm x 157 mm (WxDxH), it weighs 1 kg. Available now, the Abkoncore Cool Storm T404B Hurricane is priced at 40€.

Abkoncore today unveiled the Ramesses 310, a low-depth ATX full-tower case that combines tempered glass with matte-black steel. Inside, the case positions the ATX motherboard below an upper compartment that holds the PSU and drive bays. With height compensating for depth, the case is able to hold up to three 240 mm x 120 mm radiators, one each along the bottom-, rear-, and upper side panels. The motherboard tray boasts of full-ATX support as it features 9 expansion slots, so you could install a triple-slot graphics card even in the bottom-most slot.

Storage options on the Abkoncore Ramesses 310 include three 3.5-inch drive bays in the upper compartment, and two 2.5-inch mounts behind the motherboard tray. Six Abkoncore Spider Spectrum 120 mm fans come included with the case, with an internal RGB LED controller that takes in RF remote control input. RGB embellishment also frame each of the front-panel ports: four USB 3.1 type-A, HDA jacks, and the power/reset buttons. Measuring 220 mm x 550 mm x 330 mm (WxHxD), the case weighs 9 kg. Available now, the Ramesses 310 is priced at 160€.

ABKONCORE is officially announcing the release and direct availability of the H600X PC gaming enclosure. The H600X is an ATX chassis that supports RGB SYNC and a great choice for your next build. This Mid-tower ATX case is suitable for standard ATX mainboards, Micro ATX and MINI ITX mainboards. Spacious design allows for the assembly or large components such as long graphic cards up to 358 mm and high CPU coolers up to 173 mm. Power supply support for ATX up to 350 mm long and placed at the bottom inside a designated PSU chamber for lower temperature results throughout the system. The exterior of the H600X is cool due to the front rectangular mesh with carbon style pattern design. Furthermore, this chassis is equipped with many dust filters, on the top and bottom. One of the side panels is made out of tinted tempered glass so that hardware can be viewed once the built-in RGB fans are turned on and colored light is glowing over installed hardware.

Functionality is the key word for the H600X case, internal support for tool free mounting for HDD/SSD drives and additional SSD brackets on the rear of the mainboard panel. Frontal I/O support through 2x USB3.0, HD Audio and mic-jacks. Maximum cooling possibilities via the various spaces such as the pre-installed 2x 200 mm RGB spectrum fans mounted in the front and the 1x 120 RGB Hurricane fan mounted in the rear. Furthermore, there is additional space to mount 2x 120 mm or 140 mm fans on the top as well as liquid cooling radiator size 120/240/360 mm at the front or top.

ABKONCORE is pleased to announce the availability of the ASTRA AM6 cost effective gaming mouse. This rigor PC gaming mouse is ambidextrous, ergonomic and simply cool. The addition of the RGB function to this niche mouse makes it even cooler. Colorful 16.8 million RGB led glaring around the mouse. Customize your own send of gaming by choosing one of the 4 pre-set flash modes to you own liking. The ASTRA AM8 is provides comfort due to the outline natural human grip design and symmetrical shape for both right and left hand use. This way you can switch between using the mouse left and right to release fatigue when entered in long gaming sessions.

The new ASTRA is featured with 4-Step sensitivity adjustment to maximum 3200 DPI. Either to increase or decrease the pointer speed for any specific game you're playing. PDI can be set without software, just by the push of a button. The optical precision sensor enables you to control the mouse with high accuracy and aim faster than you opponents.

Introducing the Abkoncore Helios 500 SYNC middle tower PC case for the DYI, PC enthusiast and PC gamer alike. Cool front tempered glass design with large side ventilation intakes for fresh air enabled by the two 200 mm large RGB SYNC Hurricane Spectrum cooling fans. The body is built out of 0.65 mm SECC steel with side tempered glass for best viewing your hardware.

Ready to accommodate your high wattage power supplies up to 220 mm long. Mainboard support for ATX, Micro-ATX or Mini-ITX. Space for long graphics cards up to 355 mm, large CPU coolers up to 178 mm high and liquid cooling systems up to 360 mm large. Total air cooling support locations: Front 3x 120 mm or 2x 140 mm or 2x 200 mm, included 2x 200 mm Hurricane Spectrum RGB SYNC. Top cooling space: 2x 120 mm or 2x 140 mm and rear exhaust space: 1x120mm or 1x 140 mm, built in 1x120 Hurricane Spectrum RGB SYNC included.

The ABKONCORE Spider Spectrum Fans 3 in 1 remote kit are a perfect addition to any PC setup because the flashy LEDs illuminate and therefore showoff the beaming powerful engine that is the chassis. Not only do the fans improve the chassis aesthetically, but improves its functionality as well. The whirring blades of the fans provide cool air inside the PC allowing other vital components of the PC to be functioning at the required optimum temperature possible, positively affecting the performance of the PC as a whole.

Having full control of your Spider Spectrum Fans with the inclusive remote controller makes personalizing the LED color/speed and fan speed of your choice so much more entertaining. Certified compatible with ASUS Aura, ASRock RGB, GIGABYTE and MSI RGB. What you don't have to worry about personalizing with the fan remote controller is the amount of noise that the Spider Spectrum Fans generates, the anti-vibration pads that are on each of the 8 corners of the fan successfully cancels out any noise caused by vibration possible creating a silent operating environment. The ABKONCORE Spider Spectrum fan kit will be available with an MSRP of €27,95 / $33,95 (including VAT).