ENERMAX is proud to be launching its new workstation-level CPU AIO cooler: LIQTECH XTR. Specifically designed for the AMD Ryzen Threadripper and Intel Xeon W series processors with a cooling capacity of over 550 W. LIQTECH XTR AIO cooler debuted at Computex 2024 with a live demo, achieving a cooling capacity of over 550 W. The LIQTECH XTR 360 mm CPU cooler features an enlarged cold plate design on its water block, fully covering the IHS area of both AMD Threadripper and Intel Xeon W series processors. Thanks to ENERMAX's high-efficient EP1 pump with a 450L/h flow rate and 3000 RPM radiator fans, LIQTECH XTR can provide more than 550 W cooling capacity on both AMD and Intel platforms.

LIQTECH XTR AIO cooler is also the first ENERMAX CPU cooler to implement the magnetic, fully rotatable, real-time status digital display. Users can manually adjust the LED screen on the water block to set their preferred digital direction. The additional software, ENERMAX's tuner, can further provide a real-time data showing on the water block. ENERMAX's LIQTECH XTR AIO cooler is the perfect cooling solution for workstations that need to perform heavy duty tasks such as 3D rendering, product visualization & simulation, artificial intelligence (AI), and machine learning acceleration. It fully supports AMD socket sTR5/SP6/sWRX8/sTRX4/TR4/SP3 and Intel socket LGA 4677.

SilverStone today introduced the XE04-SP6P, a CPU cooler designed for AMD server/workstation sockets sTR5 and SP6, meant for those that use Ryzen Threadripper chips as server processors in rackmount cases as tall as 4U. The cooler is designed for thermal loads as high as 350 W, but is an aluminium fin-stack heatsink that measures 130 mm x 119 mm x 126 mm (WxHxD). This may look rather small for its thermal capacity in comparison to some desktop D-type coolers; but this is a server cooler, the desktop standards for fan noise go out the window, and a high-powered 92 mm fan is used to ventilate this thing. The cooler's capacity is mainly thanks to the high airflow.

The 92 mm high-powered fan comes pre-installed in a cavity between the fin-stack. It turns at speeds of up to 5,000 RPM, pushing 77.7 CFM of airflow at a phenomenal 10.67 mm H₂O static pressure, and a noise output of 43 dBA. The fan features double-ball bearings, and is rated for 90,000 hours. The nickel-plated copper base comes with a pre-applied thermal compound. From this base, six copper heatpipes convey heat through the fin-stack in a configuration similar to that of a D-type cooler. The cooler weighs 743 g, including its fan and factory-fitted RM. The company didn't reveal pricing.