Multi-GPU liquid-cooling setups can be tricky business, and if not done well, could look ugly. To address this, Koolance launched the CNT-VDBx series of connecting blocks for multi-GPU setups running GeForce GTX 780 or GeForce GTX Titan graphics cards, with the company's VID-NXTTN full-coverage block. These connector-blocks each relay coolant in "parallel" over multiple graphics cards, while looking good. The connecting blocks are little more than metal tubing covered by acetal tops to match full-coverage blocks. These blocks are sold in pairs, for 2-point (two card, CNT-VDB1), 2-point over 3 slots (two card, CNT-VDB2), 3-point (three card, CNT-VDB3), and 4-point (four card, CNT-VDB4) variants, priced at $39.49, $42.49, $50.99, and $59.99, respectively.

In the run up to its 7th August launch, MSI GeForce GTX 780 Lightning got teased by the company's Europe office some more. Adding to the abstract "I can hear thunder" video presentation from earlier this month, MSI posted three new pictures. The first one depicts the "Lightning" engraving onto the cooler shroud. The second one reveals a new GPU Reactor module that isn't an unforgivable color mismatch this time around. Lastly, there's one that gives us a glimpse of its cooler, particularly its fan, which borrows a few design ideas from NVIDIA, and its metal fan hubs in use since GeForce GTX 690, GTX Titan and some other reference design boards.

Palit Microsystems Ltd, leading graphics card manufacturer, is proud to announce a closer co-operation with EK Water Blocks, Ljubljana-based premium water cooling gear manufacturer from Slovenia. This decision has been mutually taken in order to offer best possible support to customers deciding to watercool their Palit engineered graphics card. Palit always takes it a step further and develops electrically improved versions of graphics cards offering substantialy higher performance and reliability out-of-the-box.

This already high overclocking & stability potential can be further improved by the use of highest performance water cooling solutions provided by EK Water Blocks. As a result of this co-op Palit customers can expect a much quicker availability on these new, customized graphics cards offering a high quality customized water cooling solution from the launching day on. The first fruit of this collaboration will be the release of EK Water Blocks Full-Cover water block for Palit's Titan-killer graphics card - the GeForce GTX 780 Super JetStream which is due to release in second half of August 2013.

During the week of Computex 2013, 6 overclocking records were shattered by professional overclockers with G.SKILL extreme performance DDR3 memory. Established in 1989 by computer hardware enthusiasts, G.SKILL is a leading memory & Solid State Drive manufacturer based in Taipei, Taiwan. The company's top priority is quality. All of the products undergo a series of the most rigorous tests and strict quality control processes. In addition to a committed, qualified IC testing house to examine the products, all G.SKILL products are 100% tested to ensure the highest yield, reliability and quality.

Taiwanese PC cooling company Titan expanded its Dragonfly line of low-noise CPU coolers with two additions, the Dragonfly 3 (model: TTC-NC85TZ/RB) and Dragonfly 4 (TTC-NC95TZ/RB), pictured in that order. Both coolers are built in the aluminum fin tower-type form-factors, with heat pipes fanning out throughout the stacks, rather than passing through its edges. This ensures a more uniform heat transfer to the stack. The two use exposed copper heat pipes that make direct contact with the CPU.

Measuring 100 x 71.4 x 150 mm, the Dragonfly 3 uses three heat pipes, and a 95 mm PWM-controlled fan to ventilate its fin-stack. The fan has a wide speed range, spanning from 210 to 2,100 RPM, with noise levels as low as 5 dBA, and as high as 28.6 dBA. The Dragonfly 4, on the other hand, measures 120 x 71.4 x 160 mm, uses four heat pipes, and a larger 120 mm fan that spins at 150 to 1,500 RPM, with noise levels under 5 dBA at its lowest operational speed, and 28.6 dBA at its highest. Both coolers support modern CPU socket types, including LGA115x, LGA775, LGA1366, LGA2011, AM3+/AM3/AM2+/AM2, and FM2/FM1. The company didn't release pricing or availability information.

For those not sold on the looks and cooling performance of NVIDIA's reference design for the GeForce GTX Titan, GIGABYTE could have an alternative DIY cooling solution concept. The company is working on a new high-performance air graphics card cooler, which it could deploy on upcoming high-end graphics cards. Named WindForce 450W, the cooler is designed to handle thermal loads as high as 450W. GIGABYTE strapped it on to the GeForce GTX TITAN and GTX 680, to show it off, at its "New Idea Tech Tour" event held in Berlin.

WindForce 450W is a triple-slot graphics card cooler. It uses a pair of dense aluminum fin stacks to dissipate heat. Three thick (10 mm thick?) copper heat pipes convey heat to these stacks, which is drawn directly from the GPU die. The two stacks are ventilated by three 80 mm fans. When strapped to a GeForce GTX 680, GIGABYTE claims the cooler keeps its noise below 28.3 dB, with Furmark running. On the GTX Titan, it works to provide higher GPU Boost frequencies, or helps sustain set frequency offsets better. With NVIDIA clamping down restrictions on modifying reference design GeForce GTX TITAN (with exceptions for liquid-based custom cooling solutions), we won't see a card that combines the chip with WindForce 450W any time soon.

FinalWire announced AIDA64 v2.85, the popular system diagnostic and benchmarking suite is updated with 64-bit benchmarks optimized for AMD's "Richland" APUs, improved support for "Kaveri," "Kabini," and "Temash" APUs; and Intel "Haswell" and "Valleyview" CPUs; early support for AMD "Beema" APU, Intel "Avoton" SoC, "Crystalwell," "Ivy Bridge-E," and "Haswell-E" CPU, "Haswell-ULT" SoC; preliminary support for DDR4 and GDDR5 system memory types; and GPU support for AMD Radeon HD 8000 series and NVIDIA GeForce GTX Titan.DOWNLOAD: FinalWire AIDA64 v2.85 Installer (EXE), Archive (ZIP)

EK Water Blocks, Ljubljana based premium water cooling gear manufacturer, is proud to officially introduce two additional EK-FC Titan water blocks to cater to the different needs and taste of members of the water cooling community. Looks and port configuration is the only thing that separate these two newcomers from the pack as the cooling engine remained the same. As a result these new products offer the very same excellent thermal- and hydraulic characteristics.

EK-FC Titan - Nickel (Original CSQ) offers the same original CSQ looks introduced in June 2012. It is therefore compatible with EK-FC Bridge & Link CSQ system multiple cards interconnect, which come in both satin finish Acrylic- as well as black POM Acetal version. The water block itself is compatible with EK-FC Titan Backplate but cannot be interconnected to other EK-FC Titan (using EK-FC Bridge & Link CSQ or EK-FC Terminal system) series water blocks apart from the Original CSQ version. This product comes with the MSRP of 99.95€ (incl. VAT) and is readily available for purcahse through EK Webshop as well as Partner Reseller Network.

NVIDIA updated its GPU micro-architecture roadmap at the 2013 GPU Technology Conference (GTC). Currently spearheaded by the "Kepler" micro-architecture, which drives its GeForce, Quadro, and Tesla product lines, and which will drive Tegra mobile SoCs in 2014; NVIDIA's next-generation "Maxwell" could make its debut some time in 2014. Going by NVIDIA's graph that puts performance-per-Watt against time, "Maxwell" should nearly double performance. Maxwell GPUs feature unified virtual memory, which lets CPUs treat graphics card memory as system memory, for faster general-purpose performance.

Although not backed by a tentative launch year, and assuming "Maxwell" has its run for another two years, 2016 could see the launch of NVIDIA's "Volta" GPU micro-architecture. In addition to advancements by its predecessors, "Volta" could introduce stacked DRAM technology. It would enable GPU memory bandwidths as high as 1 TB/s. Current high-end graphics cards such as GeForce Titan and Radeon HD 7970 GHz Edition, are capable of breaching the 300 GB/s mark, so NVIDIA's claims don't sound far-fetched.

Koolance rolled out its full-coverage water block for NVIDIA GeForce GTX Titan graphics card, the VID-NXTTN. Made of nickel-plated copper (main block), nickel-plated brass (ports), and POM-acetal (top), the block features a micro-fin lattice to dissipate heat from the GPU to the coolant. The main block covers hot components on the obverse side of the PCB, including the GPU, memory chips, and VRM; while a back-plate is included to cover memory chips on the reverse side. Standard G 1/4 BSPP threading is provided. Measuring 17.15 x 11.43 x 1.91 cm (WxDxH), the block weighs about 1.02 kg. Available on Koolance' online store, it is priced at $129.99 a piece.

NVIDIA may decisively hold on to the single-GPU performance lead, with its GeForce GTX Titan graphics card, but at roughly $1000, it could attract a very small market. According to a SweClockers report, NVIDIA is looking to woo gamers just ahead of Summer with the second GK110-based GeForce GTX graphics card. Similar in specifications to the fabled Quadro K6000, the new SKU could feature 13 out of 15 streaming multiprocessors on the GK110 silicon, working out to 2,496 CUDA cores, 208 texture memory units, a 320-bit wide GDDR5 memory interface holding 5 GB of memory, and 40 ROPs. Given that there's a deep ravine between the ~$450 GeForce GTX 680 and ~$1000 GTX Titan, NVIDIA could pick a price-point in the middle. The report claims the new SKU could launch some time between July and August, 2013.

Titan announced the TTC-G27T universal notebook cooler. Designed for notebooks with screen-sizes as high as 15.6-inch, the cooler is little more than a 140 mm fan stapped onto an ergonomic cooler base. The fan plugs into your notebook via USB, spins at speeds of 800 RPM ±15%, pushing up to 64.86 CFM of air, with a noise output of around 26.4 dBA. The sleeve bearing fan offers an MTBF of 25,000 hours. The company did not give out pricing information, but we expect it to be around US $25.

Inno3D rolled out its newest flagship graphics card, the GeForce GTX Titan iChill Black Series. The card ships with Arctic's Accelero Hybrid cooling solution pre-fitted to an NVIDIA reference design GTX Titan PCB. The cooler uses a combination of a closed-loop liquid block to cool the GPU, and fan-heatsink to cool other hot components on the card, such as memory chips and VRM.

The GTX Titan iChill Black series ships with factory-overclocked speeds of 937 MHz core, and 980 MHz GPU Boost, against NVIDIA reference speeds of 837 MHz core and 876 MHz GPU Boost. Memory clock speed stays at 6.00 GHz. Based on the 28 nm GK110 silicon, NVIDIA's GeForce GTX Titan features 2,688 CUDA cores, 224 TMUs, 48 ROPs, and a 384-bit wide GDDR5 memory interface, holding 6 GB of memory. The card draws power from a combination of 6-pin and 8-pin PCIe power connectors, display outputs include a pair of dual-link DVI, HDMI, and DisplayPort. The company did not release pricing or availability information.

Following the launch of its consumer-oriented GeForce GTX Titan, NVIDIA is planning its second graphics card based on the 28 nm GK110 silicon, this one for professionals, and featuring in the Quadro family. Likely bearing the model name Quadro K6000, the card is expected to feature 13 of the GK110's 15 streaming multiprocessors (SMXs), which work out to 2,496 CUDA cores, 208 TMUs, 40 ROPs, and a 320-bit wide GDDR5 memory interface, likely holding 5 GB of memory. The configuration could be just about enough for 1 TFLOP/s double-precision floating-point performance, and could hence offer an upgrade over Fermi-based Quadro 6000.

TechPowerUp announced version 0.6.8 of GPU-Z, the popular graphics subsystem information, monitoring, and diagnostic utility, which gives you detailed information about the installed graphics hardware, and lets you monitor key specifications in real-time, such as clock speeds, temperatures, voltages, and video memory usage. Version 0.6.8 introduces support for new GPUs, namely NVIDIA's GeForce GTX Titan, GeForce 505 (GT216), GT 640M, GTX 675MX, Quadro K2000, and K3000; AMD's Radeon HD 7480D, FirePro W8000, V8700, fake HD 6850 (based on HD 6450). GPU load monitoring method on AMD GPUs is improved, and should be more accurate. Several minor bugs were patched.DOWNLOAD: TechPowerUp GPU-Z 0.6.8, TechPowerUp GPU-Z 0.6.8 ASUS ROG Themed

The change-log follows.

To efficiently cool down the GeForce GTX TITAN graphics card, Aqua Computer offers the new Kryographics series full cover blocks. Other than the old aquagrafx series the new blocks feature wider openings at the side of the copper base and a revised connection terminal to optimize the flow rate.

The 10 mm thick copper base covers the GPU, RAM and voltage regulators. All surfaces with contact to the card are highly polised to 1/1000mm. The top is made of stainless steel and comes with a laser engraved logo. Above the GPU the block uses a 0.25mm micro structure which results in a delta of 10°C between the GPU and water in our internal tests with Furmark. Due to the precise CNC production process the RAM chips can be used with thermal grease which offers a much better heat transfer over thermal pads.

EVGA unveiled its LED Controller software v1.0.0.11 for GeForce GTX Titan. Similar to the one that works for the GTX 690, the software tinkers with the voltage of the 2-pin connector that powers the glowy GeForce GTX logo on the top of the card. The software gives you either static manual control, or adjusts the logo's brightness according to GPU utilization, clock; or produce a groovy "breathing" effect. The tool is also compatible with older GeForce GTX 690 graphics cards.DOWNLOAD: EVGA GTX Titan LED Controller 1.0.0.11

Even as every other AIC partner is under strict directions not to modify GeForce GTX Titan board design, NVIDIA pet EVGA released pictures of its upcoming GTX Titan Signature SC HydroCopper graphics card (model: 06G-P4-2795-KR), the first GTX Titan with a full coverage water block pre-installed. Co-developed by Swiftech, EVGA's block uses nickel-plated copper as its primary material, with a secsi black shroud running the card's entire length. In addition to the 7.1 billion-transistor GPU, the block cools memory chips and VRM components on the obverse side of the PCB. The reverse side gets a back-plate. EVGA did not disclose clock speeds, but the SC (super-clocked) brand extension suggests it ships with a factory-overclock. EVGA didn't disclose its price, but we expect it to be around US $1,300.

ASUS today announced the GeForce GTX Titan graphics card, based on supercomputer-grade NVIDIA Tesla K20X architecture. The new card delivers the world's most powerful single-GPU performance to PC gamers and multimedia enthusiasts. It is optimized for DirectX 11.1 and PCI Express 3.0, with a GPU clock of 876MHz achieved by use of NVIDIA GPU Boost 2.0 technology. The ASUS GeForce GTX Titan offers 6GB of GDDR5 video memory clocked at 6000MHz.

It presents the advanced graphics processing power required to fully enjoy the next evolution in gaming technology and multimedia in standards well beyond full HD 1080p. The ASUS GeForce GTX Titan ships with the user-friendly GPU Tweak utility in the box, which allows customers to easily modify performance parameters through a clear yet detailed interface.

Inno3D is thrilled to unveil the much anticipated Inno3D GeForce Titan, the world's fastest single GPU graphics card ever built that boasts ground breaking power efficiency. The sleek exterior of cast aluminum and trivalent chromium plating of the Titan has a custom vapor chamber cooler. The Inno3D GeForce Titan powerhouse delivers high-end performance with style. Get all the premium GTX gaming technologies such as NVIDIA 3D Vision , PhysX, and Quad SLI for the ultimate PC gaming experience, plus NVIDIA surround sound with up to four monitors.

MSI announced its GeForce GTX Titan graphics card, adding to the list of partners selling the same exact wine in a different bottle. MSI's package includes Live Update and Afterburner overclocking software. The GTX Titan is based on NVIDIA's 28 nm GK110 silicon, featuring 2,688 CUDA cores, 224 TMUs, 48 ROPs, and 6 GB of GDDR5 memory across a 384-bit wide interface. It features NVIDIA-reference clock speeds of 837/876/6008 MHz (core/GPU Boost/memory), draws power from a combination of 6-pin and 8-pin PCIe power connectors, and its display outputs include two dual-link DVI, HDMI, and DisplayPort. MSI's GTX Titan is priced at $1000 before taxes.

One of NVIDIA's highest volume AIC partners, Galaxy, dropped in its GeForce GTX Titan offering, joining other partners in their late-evening launch, even as partners struggle to scrape up inventories. Galaxy's offering is no different from absolutely any other among NVIDIA's partners, who are restricted from modifying the board design, or playing with the reference clock speeds. Partners are allowed to drop in additional items in their packages, and of course their own overclocking software that can take advantage of the card's enthusiast features. Based on the 28 nm GK110 silicon, the GeForce GTX Titan features 2,688 CUDA cores, 224 TMUs, 48 ROPs, and a 384-bit wide GDDR5 memory interface, holding 6 GB of memory. The card features NVIDIA reference clock speeds of 837/876/6008 MHz (core/GPU Boost/memory). It should be priced around $1000 before taxes.

Palit's twin brand Gainward announced its GeForce GTX Titan, too. The card, like every other GTX Titan launched today (and will be), sticks to NVIDIA's reference board design, and reference clock speeds of 837/876/6008 MHz (core/GPU Boost/memory). Based on the 28 nm GK110 silicon, the GeForce GTX Titan features 2,688 CUDA cores, 224 TMUs, 48 ROPs, and a 384-bit wide GDDR5 memory interface, holding 6 GB of memory; and like every other GTX Titan, it is priced at $1000 before taxes.

Gigabyte announced its GeForce GTX Titan graphics card. Much like every other GTX Titan announced till now, it sticks to NVIDIA reference design. To spice things up, Gigabyte is tossing in a few extras from its Aivia line of gaming peripherals, by including a gaming mousepad, and a pack of Aivia-themed playing cards that you can also play "memory" with. Based on the 28 nm GK110 silicon, the GeForce GTX Titan features 2,688 CUDA cores, 224 TMUs, 48 ROPs, and a 384-bit wide GDDR5 memory interface, holding 6 GB of memory. The card features NVIDIA reference clock speeds of 837/876/6008 MHz (core/GPU Boost/memory). It should be priced at $1000 before taxes, $1100~$1200 after it.

Palit joined other NVIDIA partners in making a late-evening announcement of its GeForce GTX Titan graphics card, even though we're informed that partners have zero GTX Titan inventories, and could begin having them only by early-March. Palit's GTX Titan is no different from any of the other SKUs launched today. NVIDIA restricts partners from modifying the board design, much like it did with the GeForce GTX 690. Based on the 28 nm GK110 silicon, the GeForce GTX Titan features 2,688 CUDA cores, 224 TMUs, 48 ROPs, and a 384-bit wide GDDR5 memory interface, holding 6 GB of memory. It is priced at US $1000, which could go anywhere up to $1100 and $1200 including taxes.