Transcend today announced the MTE240S, a mid-range SSD built in the M.2-2280 form-factor, with PCI-Express 4.0 x4 host interface, which boasts of some stellar manufacturer-rated endurance numbers. The drive uses an unknown 4-channel controller, and while its rated sequential speeds fall well below what the bus is capable of, they're higher than most PCIe Gen3 drives. The MTE240S is available in 500 GB and 1 TB capacity variants. Both come with graphene-coated copper heatspreaders.

The 500 GB variant offers sequential speeds of up to 3800 MB/s reads, with up to 2800 MB/s sequential writes, up to 190,000 IOPS 4K random-reads, and up to 540,000 IOPS 4K random-writes. The 1 TB variant, on the other hand, clocks up to 3800 MB/s sequential reads, with up to 3200 MB/s sequential writes; up to 370,000 IOPS 4K random-reads, and up to 560,000 IOPS 4K random-writes. Transcend claims that the 500 GB variant can handle 850 TBW endurance, and the 1 TB variant 1,700 TBW. The company is backing them with 5-year warranties.

Transcend Information, Inc. (Transcend ), a leading brand of digital storage and multimedia products, is proud to launch the new CFexpress Type B Card Reader RDE2 and the CFexpress 820 Type B Memory Card. Tailored for the professional photography market, these products feature outstanding performance that improve professional efficiency, reducing the time needed to transfer files while making sure all the crucial moments are captured.

Transcend's RDE2 card reader is designed specifically for photographers using CFexpress memory cards. Utilizing the USB 3.2 Gen 2x2 interface, the RDE2 card reader offers an optimum data transfer rate of 20 Gbps, reducing the time needed to transfer files from one device to another. To create a better, smoother editing experience, Transcend provides USB Type-A and Type-C cables, so the card reader can be seamlessly connected to personal computers and tablets. The RDE2 card reader comes with a lightweight aluminium housing that is wear-resistant and anti-scratch. Covered by non-slip silicone rubber, the device is also heat resistant. For professional photographers who are always on-the-go, the portable RDE2 card reader provides stable, reliable performance.

Transcend, a leading brand of industrial-grade memory products and storage solutions, recently announced the release of a new series of industrial-grade DDR4-3200 memory modules. Aiming at 5G networking and intelligent computing at the edge, DDR4-3200 memory modules feature high transmission bandwidth at 3200MT/s, low latency, and low power consumption, running at 1.2 V. The line-up includes Unbuffered Long-DIMM, Unbuffered SO-DIMM, ECC Long-DIMM, ECC SO-DIMM, and Registered Long-DIMM, addressing the varied, and often strict, form factor requirements of vertical markets. Fully complied with JEDEC specification, DDR4-3200 memory modules are optimized for Intel, AMD, and ARM processors. The DDR4-3200 DIMMs are ready to power up embedded telecommunication, in-vehicle, gaming, and smart healthcare applications in the approaching AIoT decade.

Transcend Information Inc, a leading manufacturer of embedded memory products, recently rolled out a new line of solid-state drives featuring the latest generation of 96-layer 3D NAND flash. The release features SSDs in the NVMe PCIe Gen3 x4, SATA III M.2, and mSATA form factors, and large capacity options from 64 GB to 2 TB. Besides sporting an endurance rating of 3K P/E cycles, these solutions boast appealing new features, such as default 30µ" PCB gold finger and Corner Bond technology - which shields key components against wear and external impact - an extended operating temperature range (-20°C ~ 75°C), and dynamic thermal throttling, allowing for greater durability.

Transcend introduced the first microSDXC memory card to feature SLC caching technology. The new USD230I memory card from Transcend features a host-transparent internal logic that treats a small portion of the 3D TLC NAND flash as SLC, to improve write performance in short bursts. This should particularly help in usecases such as high-quality burst photography or high-resolution video recording. The card is also endowed with a broad operational temperature range of -40 to 85 °C. The USD230I offers sequential transfer-rates of up to 100 MB/s, with up to 3,400 IOPS random access. It comes in capacities of 8 GB, 16 GB, 32 GB, and 64 GB, offering endurance (TBW) of 36 TB for the 8 GB variant, 70 TB for the 16 GB and 32 GB variants, and 140 TB for the 64 GB variant. The company didn't reveal pricing.

Transcend Information Inc. (Transcend ), a leading manufacturer of storage and multimedia products, is proud to present the market-redefining JetFlash 910, a USB flash drive that packs incredible performance and endurance into a compact USB form factor. The flash drive utilizes the latest 3D NAND technology for up to 420 MB/s and 400 MB/s read and write speeds and an excellent endurance level of 3,000 P/E cycles - the equivalent of MLC NAND flash. With capacities up to 256 GB, the JetFlash 910 is ideal for storing a trove of 4K videos and high-resolution images, transferring them in a flash. Housed in lightweight aluminium with a sandblasted finish for extra durability and a sleek look, the JetFlash 910 takes the USB storage experience to a brand new level.

At 10 times the lifespan of a regular TLC flash drive, the JetFlash 910 offers superior and persistent protection of key data, making it great everyday carry for work and life. Having a high endurance rating also makes the JetFlash 910 well-suited for write-intensive applications, such as dashcams or surveillance systems. The aluminium metallic housing makes the USB flash drive less prone to wear, while gracing it with an extra touch of sleekness.

Transcend Information Inc., a leading manufacturer of storage and multimedia products, today announced the release of a new series of USB Type-C portable SSDs, including the ESD230C, ESD240C, and ESD250C. These drives can be used with devices equipped with USB Type-C or USB Type-A interfaces, and are fast, light, and portable. Featuring impressive storage capacity, each model sports a different kind of elegance, meaning users can choose the one that fits their own fashion sense.

The all-new ESD230C, ESD240C, and ESD250C SSDs are equipped with a USB 3.1 Gen 2 compatible interface with UASP (USB Attached SCSI Protocol), providing transfer speeds of up to 520MB/s, meaning that even 4K resolution videos transfer in an instant. The SSDs are compatible with desktops, laptops, on-the-go mobile devices, as well as gaming consoles. They provide the perfect expansion with their large capacities and speedy file-transfer capabilities.

Transcend Information Inc., a leading manufacturer of storage and multimedia products, is proud to announce the MTE220S PCIe M.2 Solid-State Drive. This SSD utilizes PCI Express Gen3 x4 interface and is compatible with NVM Express (NVMe) specifications. Utilizing this interface means never-before-seen transfer speeds of 3,500 MB/s read and 2,800 MB/s write are now a reality. Using 3D chips and packing into a M.2 2280 form factor, the MTE220S SSD is the must-have for gaming enthusiasts and high-end applications.

Transcend's MTE220S SSD comes equipped with DDR3 DRAM cache memory. This means that commonly used programs load much faster, and boot time is greatly reduced. Utilizing SLC caching, the MTE220S SSD can reach astonishing read/write speeds of 3,500 MB/s and 2,800 MB/s, respectively, and 4K Random performance is also significantly improved. In addition to speeds, reliability is also enhanced with the Low Density Parity Check code in place.

Transcend Information Inc. (Transcend ), a leading manufacturer of storage and multimedia products, is proud to announce the release of the JetDrive 855/850 PCIe Gen3 x4 NVMe solid-state drive (SSD) upgrade kit for Mac computers. The JetDrive 850 features read and write speeds of up to 1,600MB/s and 1,300MB/s, and is made of the latest 3D NAND flash. The JetDrive 855 includes a sleek aluminum Thunderbolt enclosure for a simple upgrade experience. Both models are the perfect upgrade for a MacBook Pro , MacBook Air , Mac mini , or Mac Pro .

PCIe Gen3 x4 NVMe interface allows transfer speeds of up to 1,600MB/s
Transcend's JetDrive 850 features the PCIe Gen3 x4 NVMe interface, meaning four lanes are used to transmit and receive data simultaneously. The result is compelling performance of up to 1,600MB/s read and 1,300MB/s write. Crafted of 3D NAND flash memory, the JetDrive 850 is reliable, highly compatible, and brings a whole new level of performance to Mac computers.

Transcend Information, Inc. (Transcend), a leading manufacturer of storage and multimedia products, announced today the release of the 500S and 300S series of SD and microSD cards. These memory cards, produced in capacities of up to 512GB and featuring transfer speeds of up to 95 MB/s*, are a ready-made solution for the storage needs of today's users. The gold 500S series, constructed of durable MLC flash, is ideal for action cameras and drones, while the silver 300S series SD cards are offered in capacities up to 512GB, and the microSD cards have been crafted with the smartphone market in mind.

Meeting A1 performance specifications
Transcend's 128GB 300S microSD cards meet the SD Association's latest Application Performance Class 1 (A1) standards for responsiveness, which call for performing 1,500 IOPS on random read operations and 500 IOPS on random write operations, and sequential speeds of at least 10 MB/s. The 300S series tops out at 95 MB/s read and 45 MB/s write speeds*, making it ideal for storing and running mobile apps.

Transcend Information, Inc., a leading manufacturer of industrial-grade products, is proud to announce the release of 2.5-inch and M.2 form factor industrial solid-state drives featuring 3D TLC NAND flash memory. 3D TLC NAND flash memory has performance that can rival Planar (2D) MLC NAND flash, but at a very competitive price point. The new line of industrial SSDs also boast SLC caching, a RAID engine, low-density parity check (LDPC), and other features that make for a stable, long-lasting product ready for write-intensive industrial and embedded applications.

Built with high-quality 3D TLC NAND flash memory
This all-new series of SSDs uses high-quality 3D TLC NAND flash memory. 3D NAND flash breaks through physical limitations on Planar NAND by stacking layers of memory cells to allow for greater capacities and performance. Compared to Planar NAND, 3D NAND is faster, more reliable, and delivers greater performance. Devices manufactured with 3D NAND are price competitive, making them an excellent choice for embedded systems.

Transcend Information Inc., a leading manufacturer of storage and multimedia products, is proud to announce the release of JetDrive 825 Thunderbolt PCIe portable solid-state drive (SSD) for Mac computers. The drive utilizes the powerful JetDrive 820 PCIe SSD as its storage media featuring 3D NAND flash and a PCIe Gen3 x2 interface. The JetDrive 825 offers lightning-fast transfer speeds and large capacities, making it the perfect storage upgrade for MacBook Pro, MacBook Air, Mac mini, and Mac Pro.

Thunderbolt technology in a sleek case
Transcend's JetDrive 825 features a 10Gb/s Thunderbolt interface, capable of blazing-fast file transfers. The drive is housed in sleek, aluminum alloy enclosure which was designed to tastefully complement your Mac's simple, clean design. In addition, the inner SSD is removable for greater ease of use based on users' preferences.

Transcend Information Inc., a leading manufacturer of storage and multimedia products, is proud to announce the release of the StoreJet 200 for Mac portable hard drive. This large capacity, elegantly designed, and lightweight drive is an instantly classic accessory for Mac devices. Featuring the USB 3.1 Gen 1 interface, a USB Type-C connector, and pre-formatted with the HFS+ file system, the StoreJet 200 is ready to go right out of the package.

Lightweight and capacious
Transcend's StoreJet 200 for Mac is only 9.95 mm thick and weighs in at just 133g, making it the perfect storage companion for work or travel. In addition to its portability and sleek design, the StoreJet 200 for Mac has a storage capacity of 2TB, allowing users to enjoy their digital life wherever they may roam.

In addition to the StoreJet 600 for Mac, Transcend introduced a two new M.2 PCIe SSD models, beginning with the MTE820 designed for PCs, and the JetDrive 820 for Macs. The MTE820 is based on the same controller as the MTE850 the company launched in May, but features 3D TLC NAND flash memory instead of 3D MLC NAND. At the heart of this drive is the Silicon Motion SM2260 controller. Built in the M.2-2280 form-factor, the drive takes advantage of 32 Gb/s M.2 (PCI-Express 3.0 x4 wiring), and the NVMe 1.2 protocol. It offers sequential transfer speeds of up to 1,760 MB/s reads, with up to 860 MB/s writes. The drive is available in 128 GB, 256 GB, and 512 GB capacities.

Next up, is the JetDrive 820. Designed for Macs after late-2013, the drive features a proprietary PCI-Express 3.0 x2 interface for Macs, and comes in capacities of 240 GB, 480 GB, and 960 GB. It's based on the same combination of controller and memory as the MTE820 - SMI2260 with 3D TLC NAND flash, and on account of its host interface, offers sequential transfer speeds of up to 950 MB/s reads, with up to 950 MB/s writes, on Macs with PCIe 3.0 NGFF slots. On older Macs with gen 2.0 slots, it offers up to 700 MB/s reads, with up to 650 MB/s writes.

Transcend Information Inc., a leading manufacturer of storage and multimedia products, is proud to announce the release of the StoreJet 600 for Mac. Housed in a stunning metallic casing, this light and durable StoreJet 600 for Mac matches the sleek lines and elegant curves of Mac devices. The space-gray color reflects a sophisticated style, and makes this portable SSD a fashionable on-the-go accessory. The StoreJet 600 for Mac features the latest USB 3.1 Gen 2 interface and pre-formatted HFS+ file system, allowing it to be used right out of the box.

Transcend's StoreJet 600 for Mac utilizes the USB 3.1 Gen 2 interface, which achieves double the transfer speeds of USB 3.1 Gen 1 devices, and meets UASP standards to boost transfer rates up to 470 MB/s. In addition, both a USB Type-C cable and a USB Type-C to Type-A cable are included in the package to accommodate Mac models featuring the Thunderbolt 3, USB Type-C, or USB 3.0 interface.

Transcend Information Inc., a leading manufacturer of storage and multimedia products, is proud to introduce the SSD430, an industrial-grade solid-state drive. Compatible with SATA III 6Gb/s specifications, the SSD430 delivers impressive transfer speeds of up to 560MB/s read and 490MB/s write. In addition to blazing speed, Transcend's SSD430 features excellent reliability and comes in a small, stylish case. The drive is loaded with low-density parity check (LDPC) error-correction code (ECC) and advanced protective technologies, making it an excellent choice for industrial needs.

The industrial-grade SSD430 solid-state drive is constructed of 3D MLC NAND flash chips. 3D engineering has increased SSD430's speeds to an incredible sequential 560MB/s read and 490MB/s write; the random transfer efficiency is also boosted to 310MB/s read and 350MB/s write. Low power consumption and high reliability are also hallmarks of 3D NAND. Transcend's SSD430 is manufactured for a long-term, stable operation for various types of data and application, and is suited for industrial PCs, automated machinery, and fanless industrial systems.

Transcend Memory announced four client SSD product lines based on 3D NAND flash memory. The lineup begins with the new MTS810 and MTS420 lines of mainstream SSDs built in the M.2-2280 and M.2-2242 form-factors, respectively, which take advantage of the SATA 6 Gb/s interface. The MTS810 succeeds the MTS800 series the company launched in 2016. It is based on a newer TLC NAND flash memory, and a more compact SSD controller made by Silicon Motion. The drive puts out up to 560 MB/s of sequential transfer rates. The MTS420 is its miniaturized version in the M.2-2242 form-factor. Both drives will be available only in 128 GB capacities.

Next up, is the SSD230 series. The company already announced this drive back in November 2016. Built in the 7 mm-thick 2.5-inch form-factor, it comes in 128 GB, 256 GB, and 512 GB capacities, and offers sequential transfer rates of up to 560 MB/s reads, with up to 520 MB/s writes. Lastly, Transcend unveiled its latest high-performance M.2-2280 SSD, which takes advantage of the PCI-Express 3.0 x4 interface with NVMe 1.2 protocol, the MTE850 series. Available in 128 GB, 256 GB, and 512 GB capacities, the drive belts out sequential transfer rates of up to 2,500 MB/s reads, with up to 1,100 MB/s writes. It features 3D MLC NAND flash memory.

Transcend Information, Inc. (Transcend ), a leading manufacturer of storage and multimedia products, is proud to announce the launch of a brand new SSD with built-in 3D NAND flash. With the growing needs for high-capacity and high-performance storage, Transcend has adopted 3D NAND flash technology for its 2.5" SSD230 solid state drives, boosting storage capacity, transfer rates, and reliability all at once.

To achieve higher densities, 2D planar NAND flash technology shrinks each memory cell onto a single layer of cells. However, this technology increases cell-to-cell interference and hence reduces reliability as it approaches its physical scaling limit. 3D NAND flash was developed to resolve this bottleneck, as it features multiple layers of memory cells stacked vertically. 3D NAND flash not only resolves the density limitations of 2D horizontal NAND, but also boosts read and write performance, as it does not require the invocation of algorithms to prevent data corruption. Free from cell-to-cell interference, state-of-the art 3D NAND flash technology also features higher endurance and lower power consumption.

Transcend Information, Inc., a leading manufacturer of industrial-grade flash and DRAM products, is proud to announce the release of its industrial-grade SuperMLC microSD cards. Positioned between its SLC and MLC NAND flash offerings, Transcend's exclusive SuperMLC technology features a cost-effective solution that offers performance close to that of SLC NAND flash. The newly-released SuperMLC microSD cards boast high-performance, exceptional endurance, and wide temperature tolerance (-40°C to 85°C) at affordable prices, ideal for industrial applications such as medical devices, surveillance systems, and POS terminals.

Combining the benefits of both Single-Level Cell (SLC) and Multi-Level Cell (MLC) NAND flash, Transcend has successfully developed SuperMLC technology by reprogramming the two bits per cell of MLC into one bit per cell, greatly boosting its performance. The transfer speed of Transcend's new UHS-I Class 1 SuperMLC microSD cards can reach up to 95MB/s, double the speed of MLC flash chips. Although total capacity is reduced, SuperMLC offers a good balance for industrial applications that demand quality that is comparable to SLC NAND flash at a cost-effective price.

Transcend Information, Inc., a leading manufacturer of storage and multimedia products, is proud to announce the newly released JetDrive Go 500 Flash Drive specifically designed for the Apple iPhone, iPad, and iPod. With a high-quality alloy construction, smaller size, and lighter weight, Transcend's JetDrive Go 500 is equipped with both a Lightning connector and a USB 3.1 Gen 1 connector, providing convenient data transfer between Apple handheld devices and computers. Powered by Transcend's exclusive JetDrive Go App, which features a Shoot and Save function, photos and videos can be captured and saved directly to the JetDrive Go 500 flash drive without having to worry about insufficient storage space.

Transcend's JetDrive Go 500 is incredibly compact and lightweight, and is one of the smallest flash drives on the market. Available in both gold and silver colors, the JetDrive Go 500 boasts a sleek alloy casing. The extended Lightning connector allows the JetDrive Go 500 to have expanded compatibility with oversized protective bumper cases that prevent other flash drives from properly connecting without removing the case.

Transcend Information, Inc., a leading manufacturer of storage and multimedia products, is proud to announce the availability of 1 Terabyte M.2 Solid State Drive coming with 2280 form factor for ultra-thin computing devices, such as Ultrabook, tablet computers and laptops. Transcend's MTS800 M.2 SSD is equipped with high-quality MLC NAND flash to remain its excellent stability, and is exclusively built in protective technologies, such as Global Wear-leveling, Advanced Garbage Collection, and Device Sleep mode.

By utilizing the next-generation SATA III 6Gb/s interface, Transcend's MTS800 is capable of delivering sequential read/write performance of up to 560MB/s and 460MB/s respectively. The newly released spacious 1TB supplies the MTS800's capacity to its full scale ranging from 32GB to 1TB, which is determined to satisfy the needs of various market fields and individual consumer with personal budget plans.

Transcend Information, Inc., a leading manufacturer of industrial-grade products, is proud to introduce a new solution of SSD570 in a 2.5" form factor with the top quality SLC NAND flash embedded to its industrial product line. Taking advantage of the next-generation SATA III 6Gb/s interface, Transcend SSD570 in 128GB capacity boosts its exceptional transfer speeds of up to 510 MB/s read and 450 MB/s write. Best suited for industrial and embedded applications, Transcend SSD570 is equipped with value-added technologies such as IPS function, Device Sleep mode and S.M.A.R.T. attribute to provide lower power consumption and enhance data protection mechanism.

Compliant with the third generation of the SATA specification utilizing the full potential of the 6Gb/s bus, Transcend SSD570 solid state drives deliver high speed sustained sequential read/write performance of up to 510 MB/s and 450 MB/s respectively. Built on advanced Transcend TS6500 controller and high-quality SLC NAND flash, which has higher stability in data retention and longer endurance than MLC, Transcend SSD570 guarantees faster transfer speed, longer read/write endurance and lower error rates. With shock and vibration resistance design, Transcend SSD570 is the perfect storage solution suitable for industrial applications that require intensive programming yet with excellent data integrity.

Today, Micron Technology, Inc. announced a new addition to its expansive portfolio of flash storage products, providing a purpose-built solution for cost-sensitive consumer applications seeking high performance and reliability. The new TLC NAND is built on their 16-nanometer (nm) process and delivers a balanced set of features for applications like USB drives and consumer solid state drives. The market appetite for TLC is projected to be strong throughout 2015, constituting almost half of the total NAND gigabytes shipped.

Micron's 16 nm process-recognized by TechInsights as the Most Innovative Memory Device and 2014 Semiconductor of the Year-is a mature and proven storage technology, making it an excellent foundation for a reliable TLC design. TLC, or triple-level cell, is a technology that fits three bits in every flash data cell, creating greater cost and size efficiency. Customers of the technology will benefit from Micron's extensive design support team, who act as trusted advisors to ensure smooth qualification and optimal end-solution performance. Key flash customers and ecosystem partners worldwide have already begun working to integrate this new NAND with their latest designs, ensuring quick adoption in end applications.

Transcend Information, Inc., a worldwide leader in storage and multimedia products, today takes the lead to introduce the new StoreJet 35T3, its latest 3.5" external hard drive featuring the vast storage capacities up to 8TB and SuperSpeed USB 3.0 interface. The black, sleek-looking StoreJet 35T3 delivers real-world transfer rates of up to 200 MB/s, offering dramatically enhanced external storage performance for today's speed-conscious users.

As technology marches forward, large files generated by modern devices such as digital cameras and camcorders can quickly fill an internal hard drive and slow the computer down. Designed for users with high-capacity requirements, the StoreJet 35T3 not only offers an enormous 8TB of storage space for large files, but also supports the USB 3.0 standard that boosts data transfer rates up to 200 MB/s, fast enough to transfer an entire 4.7 GB DVD movie in a mere 24 seconds.

Transcend Information, Inc. (Transcend), a worldwide leader in storage and multimedia products, is proud to announce the launch of 256 GB and 128 GB high capacity USB 3.0 flash drives. The series includes the high-speed 256 GB JetFlash 780, the rugged 128 GB JetFlash 810, the classic JetFlash700/730 and the capless JetFlash 790K/790W. With enormous storage space and blazing-fast transfer rate, these USB flash drives offer the easiest way to transfer large files efficiently between USB port-equipped devices.

Taking full advantage of their 256 GB capacity, Transcend's JetFlash 780 USB flash drives allow users to store, transfer, backup and share their entire collection of personal media files and vital data. Each 256 GB flash drive can store more than 120,000 images, 64,000 mp3 songs, or a full 64 hours of Full HD video. In addition, the JetFlash 780 offers amazing transfer speeds of up to 210 MB/s, allowing users to transfer and share files quicker than ever before. Besides, the top-tier MLC NAND flash chips inside provide consistent long-life durability and endurance.