The 90° WireView Pro GPU offers the same functionality as the already available Pro variant. As the name implies, the 90° version changes the cable routing, as the 90° WireView Pro GPU acts as a right-angle adapter. This means that the 12VHPWR cable from the power supply is directed toward the case floor from the front of the GPU (when the GPU is installed horizontally).

As usual, the 90° WireView Pro GPU will be available in both "N" and "R" versions, allowing users to match the orientation of the GPU's 12VHPWR connector. Due to its design, the 90° WireView Pro GPU is not compatible with all GPU models and series. This is primarily due to the size of various cooler designs and the position of the 12VHPWR connector on the GPU's PCB.

The WireView Pro GPU was developed in collaboration with Jon "elmor" Sandström, a renowned hardware R&D engineer, extreme overclocker, and founder of Elmor Labs, to introduce new functionalities. To better protect the graphics card from potential damage, the Pro version of the WireView includes sensor pin detection that recognizes whether the 12V-2x6 power connector is correctly plugged into the power supply.

Another new feature is the temperature sensors on the PCB of the WireView Pro GPU, which measure the temperature at the power connectors. Users can set a threshold via the WireView Pro GPU, which triggers an acoustic alarm when exceeded. Additionally, an alarm can be set to trigger when a defined current level is exceeded. The WireView Pro GPU also includes two additional temperature sensors that can be connected to monitor, for example, the temperature of the graphics card's memory or voltage regulators.