Spire's gamer-centric brand, X2 Products, unveiled the CoolStorm T402B Spider Red CPU cooler. Featuring a conventional tower-type design, the cooler features an all-black aluminium fin-stack, complete with black anodized heat-pipes. The cooler's four 6 mm-thick copper heat-pipes make direct contact with the CPU at the base, conveying heat through the fin-stack. The fin-stack has jagged edges to increase turbulence and heat-dissipation. Ventilating it is a 120 mm fan that has two red plastic accents along the black fan-frame. The impeller isn't illuminated.

The fan features a hydraulic bearing that's rated for 100,000 hours, takes in 4-pin PWM input, spins between 800 to 2,000 RPM, and pushes between 10 and 45.21CFM of air, with a noise output ranging between 20 to 33 dBA. The cooler can handle thermal loads of up to 135 W, and hence gives HEDT sockets a miss. The only CPU socket types it supports are AM4, AM3(+), FM2(+), and Intel LGA115x. With its fan in place, the cooler measures 123 mm x 73 mm x 156.5 mm (WxDxH), and weighs a little over 250 g. Backed by a 2-year warranty, it is priced at USD $45.

X2 is presenting a new addition to its product line: The sleek looking NEXTYDE series mini-tower pc gamer case, built for people that just love playing with computers but looking for a smaller and perhaps a more cost effective solution. With appropriate room for up two SDD/3.5 inch or two 5.25 inch drives, five expansion slots for the installation of long graphics cards up to 320mm length. CPU cooler height clearance up to 170mm and high airflow cooling through the 4x 120mm fan mount locations throughout this chassis.

Place your favorite fan color on the top, two in the front and one on the rear and give the NEXTYDE a cool LED glow and show of your hardware through the black tinted window side panel. The NEXTYDE chassis provisions great upkeep like tool-free removal of side panels, hard drives brackets and tidy cable routing trays and holes. Built out of 0.5mm SECC steel with protected EMI shielding where the standard ATX form factor power supply is placed on the bottom. With a smooth front panel design and top access fan controller, on/off switch and USB3.0 and 2.0 connections for easy control.

From the design heart of Europe X2 is introducing a new addition to its product line: The iconic ISOLATIC series full-tower pc enclosure is built for people that just love playing with computers. With ample room for up to 5 drives, 7 expansion slots for the installation of long graphics cards ( 370mm length VGA card ) and superior cooling through the 4x 120/140mm fan mount locations throughout this chassis. The ISOLATIC 6020 offers easy upkeep shortcuts like tool-free removal of side panels, hard drives, and graphics cards.

An all-speed fan control button and generous options for peripheral connections make the front-panel a complete multimedia gateway. Constructed out of 0.5mm SPCC steel with reinforced EMI shielding the ISOLATIC 6020 chassis structure is furnished with great cable management features that facilitates neat cable routing & enhanced system airflow. Show off your hardware and neat interior through the stylish acrylic window this chassis is versatile and a great pick for your next system build, modding project or gamer system. X2 performance PC hardware.

In addition to the CUBE MAX, X2 Products is preparing the release of another aluminum-made compact chassis, the Quantax. Seen below, X2's case measures 300 x 220 x 100 mm, it has two front-facing USB ports (one USB 2.0 and one USB 3.0), one 5.25-inch drive bay, one 3.5-inch tray, and comes bundled with a 200 W power supply.

The HTPC-ready Quantax has a two-year warranty and a recommended price tag of $94.95/69.95 Euro (without VAT).

X2 Products will soon be rolling out a new, all-aluminum PC case, a model called CUBE MAX that offers support for micro ATX and mini ITX motherboards. This chassis measures 222 x 278 x 258 mm, it weighs just 1.63 kg and has two front-facing USB 3.0 ports, two internal drive bays (that can house either two 3.5-inch or three 2.5-inch drives), four PCI slots and one 120 mm fan found on the top panel.

The CUBE MAX is backed by a two-year warranty and has a MSRP of $69.95/52.95 Euro (VAT not included).

Dutch Company X2 Products will soon be rolling the Genza, an ambidextrous and customizable gaming mouse. The upcoming peripheral makes use of a 3500dpi infrared sensor and features seven programmable buttons (Omron micro switches), interchangeable side panels, an adjustable palm rest, 64K of memory for profiles, a built-in lighting system, and USB connecitivity via a braided 1.8-meter cable.

Genza is backed by a two-year warranty and has a recommended price tag of $59.95/€44.95. X2's mouse should become available later this month.

Introducing the new performance PC and gamer chassis by X2: The 6019 MOD Series, representing a great combination of versatility and durability. Positioned in our category named MOD Series, which means easy system modification, upgrading and awesome display options.

The X2.6019 tower structure is well built and just pure cool looks. The meshed front bezel allows unrestricted fresh air intake which is mandatory for today's extremely hot Micro-processors, Graphic cards and Data Drives. The spacious internal design enables flexible and neat assembly. Sufficient room is available for the installation of larger CPU coolers and long Graphic-cards, especially after removing the removable HDD cage. The Chassis is pre-applied with rubber grommet holes to feed the external water-cooling tubes into the chassis.