LaCie announced its latest peripherals featuring Thunderbolt technology today at the 2012 International CES. The new 2big Thunderbolt Series delivers speed, flexibility and capacity, while the eSATA Hub Thunderbolt Series allows users to connect external eSATA drives to their new Macs. This announcement follows the unprecedented success of LaCie's Little Big Disk Thunderbolt Series and further asserts the company's commitment to deliver high-quality products featuring Thunderbolt technology.

"LaCie is proud to offer the widest range of storage solutions featuring Thunderbolt technology," said Erwan Girard, Professional Business Unit Manager, LaCie. "These products are some of the fastest and most flexible storage solutions on the market. They will dramatically accelerate the workflow of even the most demanding digital users."

Apart from the powerful little Mr. Clone 3.0 drive-cloning and docking device, Japanese company AREA also launched the SATA 6 Gb/s TwinTurbo Hybrid addon-card. 2-port SATA 6 Gb/s cards aren't new, but they either come in 2-port internal SATA, or 2-port eSATA forms, making you have to choose between the two types. This addon-card from AREA features two internal SATA 6 Gb/s ports, two eSATA 6 Gb/s ports, and uses a common 2-port SATA 6 Gb/s controller.

The ingenuity here is a simple jumper-based way of configuring those two SATA channels to individually work as internal SATA or eSATA. So now you can set the card to have two eSATA 6 Gb/s ports, two internal SATA ports, or one internal SATA and an eSATA, whichever way you'd like, by simply toggling two sets of four jumpers switching which way the data traces of each SATA channel end up. The card uses an ASMedia ASM1061 2-port PCIe SATA 6 Gb/s controller, which supports IDE, AHCI, and simple RAID modes. It connects to the host over PCI-Express 2.0 x1. Slated for May 2012, the AREA SATA TwinTurbo Hybrid will be priced at 2,980 JPY, or $38.

Chinese data storage solutions provider Orico unveiled its new P5K line of portable hard drives. These drives feature rugged brushed-aluminum bodies. The drives are available in variants that feature both eSATA 3 Gb/s and USB 3.0, and those which feature just USB 3.0. Some of these variants even pack internal SSDs instead of HDDs, with a single "direct" PCB that holds both the host interface logic and the SSD. Unfortunately, these designs are still in the realm of CGI, and the manufacturer did not publish detailed specifications.

ASRock kicked off its "Sandy Bridge-E" compatible motherboard series with one of the most complete lineups, including a micro-ATX model. It did include some oddities, such as the X79 Extreme7, with its six DIMM slot arrangement. Socket LGA2011 Core i7 processors embed a quad-channel integrated memory controller, and so it's only logical to either have one DIMM slot per channel (four DIMM slots in all), or two DIMM slots per channel (eight in all).

ASRock unveiled its latest addition to its X79 Extreme family, the X79 Extreme6/GB, which sets this oddity straight, while creating another. This model is supposed to be a notch inferior to the X79 Extreme7, yet it provides eight DIMM slots (two per channel). Other features, however, are consistent with those of the cheaper X79 Extreme4. So it's safe to call this ASRock's answer to MSI's recently-launched X79A-GD45 8D, a relatively cheaper X79 motherboard with eight DDR3 DIMM slots. 8 DIMM slots stopped being a thing of the "premium" (again, relatively), the moment Intel launched a $210 X79 motherboard that features it, the DX79TO.

Republic of Gamers and Sabertooth aren't the only special client motherboard product lines of ASUS apart from its mainline, there's also the WS (workstation) series, that consists of motherboards fit for mission-critical environments, and which are filled to the brim with features. These motherboards are often based on chipset from Intel's client product lines, rather than enterprise ones. Intel's Sandy Bridge-E 1P platform will get a similar treatment with the P9X79WS.

Based on the ATX form-factor, the P9X79WS uses a typical X79 motherboard layout. The socket LGA2011 is powered by a 10-phase Digi+ VRM, which is cooled by a heatsink that shares its heat with a VRM heatsink cluster over the memory VRM, and the one over the X79 PCH. There are eight DDR3 DIMM slots, supporting quad-channel DDR3 memory. All expansion slots are PCI-Express long-type, though the exact lane configuration is not known. The board is advertised with 4-way NVIDIA SLI and CrossFireX support, so at least four of those slots could be wired to the CPU.

Eurocom Corporation (www.eurocom.com), a developer of long lifespan, fully upgradable Notebooks, high performance Mobile Workstations and Mobile Servers is now offering a Mobile Workstation capable of supporting NVIDIA 3D Vision with NVIDIA GeForce GTX 580M and 560M GPUs.

Eurocom offers 3D Vision support on the Neptune Mobile Workstation through a built in-emitter, 3D active shutter technology, a 120Hz display and supported NVIDIA graphics cards. The EUROCOM Neptune comes complete with an NVIDIA 3D Vision Kit which consists of one pair of 3D Vision glasses and USB cables. Each lens of the glasses operates at 60Hz, and alternate to create a 120Hz 3-dimensional experience.

The successor of the popular Midgard Mid-Tower is getting ready to step up to the plate. Xigmatek has once again managed to fill the Midgard II with a long list of unique features for the demanding PC enthusiast. Just to name a few: USB 3.0, a rubberised surface by the name of "Leather Touch", a hot-swap bay in the top, room for up to eight fans and a 280 mm radiator - all for an unbelievably low price!

When Xigmatek presented the original Midgard in 2009 as their first chassis, it managed to capture the hearts of PC users all over the world. The reviewers praised it, the users loved it. This secret behind its continuing success is quite simple: at the time, the Midgard was at the top of its game in terms of technical aspects by offering eSATA, hard drive trays and screw-less installation methods along with the possibility to route water cooling out the back of the chassis.

MSI is among the most secretive companies with their socket LGA2011 motherboard early information as the big Sandy Bridge-E day approaches (mid-November), yet we managed to score some early pictures of their top-end product from our spy-satellites and a network of cold war era retirees. Enter the MSI Big Bang XPower II, the company's top-tier socket LGA2011 motherboard for enthusiasts. This board is designed in the XL-ATX form-factor, and will fit in cases with at least 10 expansion slot bays. Thanks to the added board area, it's able to accommodate both a strong VRM, and high room for expansion (with eight DDR3 memory slots and seven PCI-Express slots).

To begin with, the LGA2011 socket is powered by a 24-phase VRM that makes use of driver-MOSFETs, solid-chokes, and High-C POSCAP capacitors. The memory is powered by a 4-phase VRM. The board draws power, apart from the 24-pin ATX, from two 8-pin EPS connectors, and an optional 6-pin PCIe (to stabilize PCIe slot power delivery). We can see many accessories to this VRM, such as phase-loading LEDs, and consolidated voltage measurement points. We are particularly intrigued by the design of the heatsinks over the VRM and chipset. The one over the VRM looks like the barrels of a Gatling gun, while the one over the chipset looks like a small piece from an ammo belt. You will either love it or detest it.

The original 8-bit Commodore 64 computer was very popular in the early 1980s, but the original company eventually closed down in the 1990s, having launched their 16-bit Amiga range in the meantime as the C64s successor. For a while now, replica C64 models, packed with the latest PC technology, have been made by Commodore USA, a different company that has purchased the original Commodore brand.

Since last summer, they have been selling a replica for $999 powered by an Intel CPU. This PC, called the C64x Ultimate (model number: C64x-UL) included a dual core Atom D525, NVIDIA Ion 2 graphics, 4 GB RAM and a 1 TB hard drive. A barebones version is available for $349 without a motherboard, just the keyboard and case, allowing the customer to add their own hardware into the retro box. However, Commodore USA has now upgraded their offering with a considerably more powerful CPU. This version is the C64x Extreme (model number: C64x-EX) which includes a 2.2 GHz Intel Core i7-2720QM CPU, mini-ITX motherboard and PSU, 8 GB DDR3 RAM, DVD writer (slot loading) 2 TB 7200 RPM HDD, Wi-Fi and Bluetooth. The back panel has the following ports: legacy PS/2, USB 2.0 x5 (one eSATA combo) USB 3.0 x2, Ethernet and three audio jacks. Video connectivity is looked after by HDMI, DVI-D and VGA outputs.

StarTech.com, a leading manufacturer of hard-to-find connectivity parts has announced the release of the (SKU: SATDOCK4U3RE) USB 3.0/eSATA to SATA Standalone 1:3 Hard Drive Duplicator Dock, which enables users to perform 1:3 sector-by-sector duplication from a single SATA hard drive onto three others simultaneously, without having to connect the dock to a host computer. The Duplicator Dock also includes a SATA to IDE adapter, which provides the option of connecting an IDE hard drive in one of the SATA slots.

"IT professionals are always looking for ways to make their jobs more efficient and this new multi-drive duplicator allows them to accomplish just that," commented StarTech.com Senior Product Manager, Carey Cline. "The ability to perform a sector by sector duplication on up to three drives simultaneously, frees up the user's time to perform other functions while the back-ups are created in the background. The fact it acts as a standalone unit also means it doesn't use up resources on their computer system."

Biostar's coveted TPower brand makes a comeback with TPower X79, Biostar's premium overclocking motherboard for the Core i7 "Sandy Bridge-E" platform. TPower motherboards have been known to be a part of some record-setting CPU OC feats right from the days of LGA775. The TPower X79 is another product that's meant for record-setting feats, with its strong VRM and slim feature-set that does away with everything overclockers don't need and adds to the bloat of the motherboard.

The CPU is powered by an 8-phase DuraMax VRM with active phase control and direct FETs. It draws power from two 8-pin EPS connectors, apart from the 24-pin ATX and an optional 4-pin Molex for PCIe slot stability. Apart from a strong VRM, the board makes use of POSCAP capacitors in the CPU area, and a high-quality clock generator. The VRM and chipset heatsinks are connected with a 6 mm heat pipe, the heatsinks are made of a ceramic surface material for better dissipation. The CPU is wired to just four DDR3 DIMM slots, one per channel, which shouldn't be an issue for overclockers. It gives you shorter memory traces. Apart from JEDEC speeds of up to DDR3-1600 MHz, the board supports DDR3-2400 MHz by overclocking.

Foxconn's latest premium gamer-overclocker segment motherboard, the Quantum Force X79, has finally taken shape. Foxconn's Quantum Force motherboards are designed to offer good overclocking features at a great value. The Quantum Force X79 uses a 14-phase VRM to power the LGA2011 "Sandy Bridge-E" processor, plus a 2-phase VRM for the memory. There are four DDR3 DIMM slots, one per memory channel. Expansion slots include three PCI-Express 3.0 x16 (PCI-E1_x16, PCI-E3_x16, and PCI-E4_x16. The second black slot (PCI-E2_x16) is electrical PCI-Express 2.0 x8.

The board is packed with features that help overclockers, starting with triple redundant BIOS, voltage measurement points for manual voltage measurements (with a wide range of voltage domains), manual overclocking buttons on board, power, reset, clear-CMOS buttons, POST speaker, and plenty of fan headers.

ASRock's socket LGA2011 motherboard lineup doesn't end with X79 Extreme7 as thought before, the company thinks there's scope for an even more loaded model that's literally bursting with connectivity and expansion features. Enter the X79 Extreme9. This board uses high-grade digital PWM circuitry to power the CPU. It draws power for the CPU VRM from two 8-pin EPS connectors. Unlike the X79 Extreme7, this board features eight DDR3 DIMM slots, two per memory channel. Expansion slots include five PCI-Express 3.0 x16, and a PCIe x1.

Since it completely ran out of room on the main PCB, ASRock put two important connectivity features on a separate (included) addon card, called the ASRock "Game Blaster". This card occupies the PCIe x1 slot, it packs a next-generation Creative SoundCore3D audio processor (more advanced than X-Fi), and a low-overhead/low-latency gigabit Ethernet connection. It's not exactly known if this connection is driven by a Killer 2100 or a more common PCIe GbE PHY backed by ASRock's proprietary packet prioritization software (XLAN).

Gigabyte released its newest premium HTPC motherboard in the mini-ITX form-factor, the A75N-USB3. As the name might suggest, this is a socket FM1 motherboard based on the AMD A75 chipset, and features USB 3.0 connectivity. Despite its compact dimensions, the board crams in everything a HTPC can benefit from. First, the FM1 socket seats AMD A-Series accelerated processing units (APUs), which pack up to four x86-64 cores with up to 4 MB cache, dual-channel DDR3-1866 integrated memory controller, and more importantly, a very powerful integrated graphics processor in the Radeon HD 6500 class. The FM1 socket on this board is powered by a 3+1 phase VRM that makes use of driver-MOSFETs. Power is drawn by a 24-pin ATX and a 4-pin CPU power connector.

The lone expansion slot is a PCI-Express 2.0 x16. The CPU is wired to two full-length DDR3 DIMM slots, which can take in up to 32 GB (that's right, future 16 GB DIMMs are supported) of dual-channel DDR3-1866 MHz memory. The AMD A75 chipset gives out four internal SATA 6 Gb/s ports, and one eSATA 6 Gb/s port on the rear panel. Display outputs include HDMI 1.4a and DVI. Analog outputs are done away with. Audio is handled by a high-quality Realtek ALC889 HD audio codec. Although this codec supports 8+2 output channels, it is wired to a 5.1 channel shared audio jack cluster, apart from the internal HDA_FP header. Those needing 7.1 channel output can still use the TOSLINK connector, that supports 7.1 channel output with 24-bit, 192 kHz resolution and Dolby Home Theater support. If even that's not enough, the HDMI connector gives you 7.1 channel HDMI audio with Dolby Prologic support.

Here are pictures of the release-grade revision (1.0) of Gigabyte's socket LGA2011 motherboards in its main linuep, the GA-X79-UD3 and GA-X79-UD5. These are the release-grade 1.0 revisions, that are redesigned for X79 chipset with just six SATA ports (doing away with SAS). With the LGA2011 motherboard lineup, Gigabyte is doing away with the "UD7" model, in its segment there is GA-X79-OC. We saw this coming, because UD7 was meant to be an overclocking motherboard identifier. On the company website, for example, the product page of GA-X58A-UD7 (2.0) shows GA-X58A-OC as a "newer model". The GA-X79-UD3 is poised to be the most affordable LGA2011 motherboard from Gigabyte, while the GA-X79-UD5 offers some premium connectivity and memory expansion features.

The GA-X79-UD3 uses a simple 8+1 phase VRM to power the LGA2011 CPU. The memory is powered by a 4-phase VRM. There are just four DDR3 DIMM slots, one per channel. There are four PCI-Express 3.0 x16 slots, among which two are x16 capable, and all four are x8 capable. There are two PCIe x1, and surprisingly, a legacy PCI slot (uncommon for LGA2011 platform). All six SATA ports from the X79 chipset are assigned as internal ports: two SATA 6 Gb/s (white), and four SATA 3 Gb/s (black). Three Marvell-made SATA 6 Gb/s controllers provide four additional internal ports (gray), and two eSATA 6 Gb/s. There are just four USB 3.0 ports, two on the rear panel, and two via internal header. 8+2 channel HD audio, a number of USB 2.0 ports, and one gigabit Ethernet connection make for the rest of the GA-X79-UD3.

EVGA released a teaser picture of its X79 FTW motherboard. This is EVGA's third LGA2011 motherboard, after the E-ATX Super Record 3 and XL-ATX X79 Classified. This board confines itself to the dimensions of a standard ATX form-factor motherboard (240 x 300 mm). It targets the gamer-overclocker market. The LGA2011 socket is powered by a 14-phase VRM, while the memory, 4-phase. EVGA completely did away with cylindrical conductive polymer capacitors, and used a 100% POSCAP capacitor design. Power is drawn in from a 24-pin ATX (angled) connector, 8-pin EPS, and a 4-pin Molex (for PCIe slot electrical stability). There are just four DDR3 DIMM slots, one per memory channel.

Expansion slots include four PCI-Express 3.0 x16 (two are x16 capable, all four are x8 capable), a PCI-Express 2.0 x16 (electrical x8), and one PCIe x1. NVIDIA 4-way SLI and AMD CrossFireX are supported. The only internal SATA ports on this board are the ones the X79 PCH gives out, two SATA 6 Gb/s and four SATA 3 Gb/s. There are two eSATA ports, driven by a third-party controller. There are as many as eight USB 3.0 ports on the rear-panel, and two via internal header. 8+2 channel HD audio, two GbE connections, a Bluetooth connection, and PCH-wired USB 2.0 ports (for keyboard/mouse) make for the rest of the standard connectors. There is an EVBot header on the rear-panel, that lets you connect to the EVBot monitoring/control module. The UEFI BIOS is stored in two separate EEPROMs, and a 2-way switch lets you manually switch between the two. Expect the X79 FTW to be a part of the company's first wave of LGA2011 motherboards.

ASUS' top-tier LGA2011 lineup is completed by the TUF Sabertooth X79. This board, along with the ROG Rampage IV Extreme and P9X79 Deluxe makes up for it. There will be many more affordable LGA2011 boards by ASUS, one such model we're hearing about is the P9X79 Pro. The TUF Sabertooth family is based on the idea of rock-solid stability and component durability, these motherboards are built to last, if not score accolades with overclocking like the ROG boards are designed for.

The Sabertooth X79 uses an ASUS-designed Digi+ VRM to power the CPU, which is spread across two sides of the socket (north and west). The heatsink cooling the VRM components to the west is actively cooled by a 40 mm fan, the one over the X79 PCH is cooled by a similarly sized lateral blower, too. Like with the other two top-tier boards from ASUS' stable, this one provides eight DDR3 DIMM slots supporting quad-channel memory.

Here are the first pictures of ASUS P9X79 Deluxe, the company's premium segment LGA2011 motherboard based on the X79 chipset. This features in ASUS' main motherboard lineup, and not sub-lineups such as Republic of Gamers (ROG) or The Ultimate Force (TUF). The P9X79 Deluxe is loaded with features and connectivity options. To begin with, the LGA2011 socket is powered by a next-generation Digi+ VRM design by ASUS, driven by Dual Intelligent Processors III (next-generation Energy Processing Unit (EPU) chip and TurboV Processing Unit (TPU)). Like with the ROG Rampage IV Extreme, VRM is spread across three sides of the socket, and each cluster of MOSFETs is cooled by heatsinks. The socket is wired to eight DDR3 DIMM slots in two sets of four slots, supporting quad-channel DDR3. The memory VRM uses a Digi+ design, too.

Among the six expansion slots, there are four PCI-Express x16 slots, and two PCIe x1. The PCH gives out six SATA ports, two 6 Gb/s (white), four 3 Gb/s (blue), the two additional 6 Gb/s ports come from a third-party controller. There are two power-eSATA ports on the rear panel. The eight USB 3.0 ports on this board are spread across as six ports on the rear-panel, and two via standard header. Other connectivity includes 8+2 channel HD audio, two gigabit Ethernet connections, USB 2.0, and Bluetooth.

Here is ASUS' top of the line LGA2011 motherboard targeting the gamer-overclocker market, the Republic of Gamers (ROG) Rampage IV Extreme. This board offers all the expansion room and connectivity you'll ever need, plus a wealth of nifty features that help overclockers and ease incremental upgrades. To begin with, the Rampage IV Extreme employs a strong digital PWM circuitry that supports heavy voltage-assisted overclocking with Vdroop control.

The LGA2011 socket is wired to eight DDR3 DIMM slots (two per channel). CPU and memory VRM areas are located along three sides of the socket, all cooled by heatsinks that are connected by heat pipes. These VRM heatsinks share heat with the one over the X79 PCH, which is actively cooled by a fan.

The Nexus Prominent R case is your best choice premium chassis for a silent computer. It's toolless installation features make it a breeze to install your components or change your set-up. The sleek professional look and materials make the case fit in anywhere.

The Prominent R have a black painted interior which is great looking. Preinstalled are two 120mm Real Silent Nexus Fan. There is noise absorption material on the side panels and isolating padding where the PSU is placed to prevent resonance, ventilation holes (and room for a fan) in the bottom of the case for air-intake and high feet (with rubber pads) keep the case elevated from the floor to make a smooth airflow possible and eliminate resonance. There is cable and fan management and on top we have an external SATA Dock, USB3.0, USB2.0, eSATA and audio connectors.

Just as its detractors thought they were done with it, and just as people started to think that attrition among some of its "popular" designers cost EVGA dearly, the company hit back with teaser pictures of the Super Record 3 or SR3, it promised back in June, it would deliver to the enthusiast community. And yes, it matches its description! The SR3 is a dual socket LGA2011 2P enthusiast desktop/workstation motherboard in the E-ATX form factor. Socket 0 is wired to eight DDR3 DIMM slots (two DIMMs/channel), while socket 1 to four slots (1 DIMM/channel).

In LGA2011 2P systems, the processor sitting on socket 0 is wired to the PCH (SR3 looks to have Patsburg-T), while the processor on socket 1 is wired to the one on socket 0 using two QPI links, closing the daisy-chain. Socket 0, apart from its 4 GB/s DMI link, has a PCI-Express 2.0 x4 (another 4 GB/s) link to supplement the DMI link, so the storage controllers don't get bottlenecked with just DMI. Both processors contribute to the PCI-Express lane budget of the motherboard. There are seven PCI-Express x16 slots, among which four are PCI-Express 3.0 x16 capable, every slot is PCI-Express 3.0 x8 capable. NVIDIA 4-way SLI is supported. This board will support Sandy Bridge-EP Xeon processors, though we don't know at this juncture if Core i7 Sandy Bridge-E is 2P capable.

Sharkoon presents the successor to their local network, insertable hard drive docking station with the SATA QuickPort Pro LAN: The Sharkoon SATA QuickPort Pro LAN Giga replaces the existing Fast Ethernet interface with a significantly faster Gigabit Ethernet interface. Through its LAN Port, associated hard drives and other medians can be integrated into a local home or office network.

In addition to the LAN Port and plug-in for SATA hard drives in 2.5 and 3.5 inch format, the Sharkoon SATA QuickPort Pro LAN Giga provides an integrated dual USB2.0 hub and a card reader for SD, SDHC, MMC and MS cards. The USB hub and card reader are connected via USB to a computer or laptop, with hard drives also being connected alternatively via the eSATA interface.

NZXT proudly presents the Phantom Big-Tower in orange, another special edition of the successful chassis. All new Phantoms, including this variant also come equipped with USB 3.0 connectivity. Additional features of these enclosures are a five channel fan controller with 20W load capacity on each circuit, spacious interior, lighting which may be turned off, elaborate cable management, numerous anti-vibration measures and a water cooling ready design.

The futuristic design of the NZXT Phantom makes it the perfect basis for an extravagant gaming PC as the case specialist has included unique shapes and lines which resembles that of modern high performance sports cars. A front door covers the drive bays, so that the chassis looks perfect, regardless of what type of drives you have installed. Besides the white, black, red and red/white color options, NZXT also offers a special pink variant and now the sleek black and orange version.

ASRock is readying is new, high-end socket LGA2011 motherboard targeting the upper-most tier of the PC enthusiast market, the X79 Extreme7. This board will be a part of the company's first wave of LGA2011 motherboards, which are slated for mid-November, 2011. Pictures scored by XFastest reveal the board to be filled to the brim with features. The CPU socket is powered by a 16-phase VRM making use of high-grade chokes, and server-grade poscap capacitors.

The socket is wired to six DDR3 DIMM slots arranged in sets of three on either sides of the socket, powered by a 4-phase VRM. Among channels A, B, C, and D; channels B and D have two DIMM slots wired, so if you have four DDR3 modules, you should populate slots 0, 2, 3, and 5; to take advantage of quad-channel DDR3 memory. There are heatsinks over the memory VRM areas, that are connected to the heatsink over the CPU VRM using heat pipes.

ASUS is ready with a new PCI-Express 3.0 compliant socket LGA1155 motherboard, adding to its recently-launched line of Intel Z68 chipset-based boards that feature Gen 3.0 PCI-Express x16 slots. This latest one is part of the elite Republic of Gamers (ROG) family, and is built on the compact micro-ATX form factor, called Maximus IV Gene-Z/Gen 3. This is the second modification of the Maximus IV Gene, the original was based on Intel P67 chipset, the Gene-Z replaced the chipset with Intel Z68 that supports Smart Response technology, while the Gene-Z/Gen 3 adds PCI-Express 3.0 x16 slots.

The board uses a 12-phase Digi+ VRM for the CPU, it is wired to four DDR3 DIMM slots supporting DRAM speeds of up to DDR3-2200 MHz with overclocking. The socket is wired to two PCI-Express 3.0 x16 slots over Gen 3 compliant switches and electrical components, the slots configure to PCI-Express 3.0 x8/x8 when both are populated. PCI-Express Gen 3 support requires next-generation 22 nm Ivy Bridge Core processors, which will be launched next year. The only other expansion slot is an open-ended PCI-Express 2.0 x4, wired to the Z68 PCH. NVIDIA SLI and AMD CrossFire are supported.