ADATA HM Series 650 W Review 12

ADATA HM Series 650 W Review

Packaging, Contents & Exterior »

Specifications

ADATA HM-650 Features & Specs
Max. DC Output650W
PFCActive PFC
Efficiency80 Plus Bronze
Operating temperature0°C - 50°C
ProtectionsOver Voltage Protection
Under Voltage Protection
Over Current Protection
Over Power Protection
Short Circuit Protection
Over Temperature Protection
Cooling140 mm Dual Ball Bearing Fan with Load Depending Led Lighting
Dimensions150 mm (W) x 86 mm (H) x 160 mm (D)
Weight2.95 kg
ComplianceATX12V v2.3, EPS 2.92
Warranty5 years
Price at time of review 65.6€

Five years warranty, LED lighting and ball bearing fan, full set of protections and a good price are very good ingredients for a successful product. If the performance is on par with the above then HM-650 will have no problem at all dealing with the tough competition in its category.

ADATA HM-650 Power Specs
Rail3.3V5V12V5VSB-12V
Max. Power25A25A53A3A0.8A
150W636W15W9.6W
Total Max. Power650W

The PSU features a single +12V rail with 53A max, a power level very near to the total max power of the unit. This is a strong indication that DC-DC converters are utilized for the minor rails generation, something that has a positive affect on efficiency. Finally, the 5VSB rail is a little stronger than the average for this category, with 3A capacity.

Cables & Connectors, Power Distribution

Native Cables
ATX connector (600 mm)20+4 pin
4+4 pin EPS12V/ATX12V (610 mm)2
Modular Cables
6+2 pin PCIe (600 mm)2

SATA (600 mm+150 mm+150 mm)

6

4 pin Molex (600 mm+150 mm) / FDD (+150 mm)

2 / 1
4 pin Molex (600 mm+150 mm) 2

All cables are long enough and the distance among the connectors is sufficient. The hardwired cables are only three, with all others being modular. Each PCIe connector uses a separate cable and on the modular panel there are four PCIe sockets, so if you buy two more modular cables then you will have four PCIe connectors in total. However the 650W capacity poses a limiting factor here for high-end VGAs. Regarding the SATA and peripheral connectors we would like to see two more in each category, meaning eight SATA and six peripheral connectors, since especially the SATA ones draw very little power each. Finally, the 24 pin ATX connector uses thicker 16 AWG wires while all other connectors use 18 AWG, which is the recommended wire size by ATX spec.

Since this PSU features a single +12V rail we do not have anything to comment about its power distribution.
Next Page »Packaging, Contents & Exterior
View as single page
Nov 24th, 2024 15:06 EST change timezone

New Forum Posts

Popular Reviews

Controversial News Posts