Packaging and Accessories

There's going to be a lot of black and white in this review, so don't adjust your screens! The product packaging is mostly monochrome with some teal accents to start things off. The Bykski logo and website URL are on the front left, salient marketing features in the middle, a larger dragon logo on the left, and the radiator-specific mentions on the right. Contact information in English and Mandarin greets us on the back, along with a sticker that finally tells us about the actual product inside. On the longer sides are illustrations of all the different product categories under the Bykski brand, and two side flaps and a seal in the middle keep things intact during transit.


Opening the box, we see the radiator inside a bubble wrap for further protection, with the accessories inside a cardboard box on the side to prevent any damage to the radiator core. The box contains the installation screws which come inside a plastic zip-lock bag. We get a set of twelve 30-mm-long M3-threaded screws for this 360 mm radiator (four per 120 mm fan) to be used with standard 25-mm-thick fans and a case/radiator mount. These are alongside another 12 screws that are also M3-threaded and shorter at ~6 mm long. This second set of screws allows for flush mounting against the case or radiator mount, such that you have the option of push or pull for fans in intake or exhaust. I will also mention that the bubble wrap needs to be slightly bigger since it was a tight squeeze for the radiator inside and removing it was easier said than done. But as far as protection goes, it does the job perfectly fine.