A Closer Look - Outside

Out of the box, the Fractal Design Focus 2 doesn't really push the envelope much in terms of overall exterior looks. That is in line with the Focus G which is pretty generic as well. That said, upon closer inspection there are a few interesting highlights that are specific to the brand and align with the design details we have seen on the Pop series as well - but more on those in just a little bit.


In the front, there is a fine metal mesh panel through which you can clearly see the two 140 mm intake fans. You may pry this cover off to gain access to the cooling units. The Fractal Focus 2 can hold two 140 or three 120 mm fans in the front. As this sample is the RGB variant, these fans are retail grade Aspect 14 units. Alternatively, there is room for a radiator of up to 360 mm size instead. In the rear, the Focus 2 looks rather traditional with the PSU bay on the bottom and seven expansion slots.


The full side panel of the chassis is made of clear, cleanly framed glass. If you look closely, you will notice two metal strips at the top and bottom to fill the space of the panel and hide any any mounting holes with room to spare. The Focus 2 does not come with a fully fledged shroud, but instead,, Fractal has placed a metal strip on the interior of the glass with its company branding. While this is unique, it also seems a bit of an odd choice as this cover not only means that you may hide the PSU, but it also gives you an area to hide unwanted cables easily. On the opposite side, there is a solid metal panel.


In the rear, starting at the bottom, the PSU bay has two sets of mounting holes and a little Fractal logo on the left of it. Above that are the seven expansion slots, each protected by individual, reusable covers. In the very top, there is room for another 120 mm fan with elongated mounting cutouts, so you may adjust its vertical position.


In the top is the vent, which will be covered by the magnetic metal mesh dust filter. Here either two 120 or 140 mm fans may be installed. For those wanting a radiator or AIO, Fractal markets the Focus 2 as a 240 mm capable unit which is made possible by the included offset brackets to ensure motherboard compatibility. There is really no tangible reason blocking this vent from being longer and thus allowing for a 360 radiator as a result. The I/O panel is of the same design as the one found on the Pop, but lacks any unique color. There is a blocked off USB-C port, as Fractal offer it as an additional accessory you may purchase for $10. There are two black USB 3.0 connectors, a combo audio jack, ARGB control button, and power switch with ARGB. In fact, the Focus 2 shares a few of the exterior panels with the Pop, but the interior is vastly different.


On the underside is a dust filter that covers the opening for the PSU bay. You may pull it out from the back of the chassis without tipping over the entire system.