Packaging and Accessories

Packaging for the Optimus Signature V2 CPU block is on the simpler and cleaner side of things with a black cardboard box that has the company logo on the front and nothing else but a seal on the side to keep the contents inside in place during transit, along with side flaps on the box. Opening it, we are greeted with a piece of paper that illustrates the installation, and an online copy can be found here. Straightaway, we see things are different from pretty much any other CPU block used today.


Underneath the instructions sheet is the block itself inside a piece of thick foam cut to fit it snugly. A cardboard sheet underneath separates the block from the accessories below, with a cutout through the two pieces to help remove them. The accessories include a thermal paste spreader and the mounting hardware that come inside a plastic pouch. The mounting hardware consists of four metal mounting posts for LGA 115x and LGA 20xx, each, four thumb screws, four thumb nuts, and eight plastic washers. No springs anywhere to be seen, and neither is there an Intel socket backplate for the LGA 115x CPU socket, which is a deliberate move by Optimus Cooling.


The company also sent along a handful of their fittings to showcase alongside the CPU block, and seen above are their soft tube flex compression fitting in a satin black cap and hardline compression fitting in their Pro-XE nickel cap. These are available individually or in packs of six or more to minimize plastic usage. The soft tube compression fittings are available in 3/8" x 5/8" (10 x 16 mm) only, and the hardline compression fittings are available in 1/2" (12.7 mm) as well as the metric 12/14/16 mm sizes, with three cap finishes for each type of satin silver aluminium (no direct contact with coolant), satin black, and the Pro-XE nickel, which involves the electro-less plating of nickel we will go over in more detail soon enough.

These fittings are CNC-machined with a rated thread accuracy of ~0.0002" and ISO-228 BSPP-G compliant, which the company proudly touts to help with their precise installation with the as accurately threaded ports on their blocks. As with most mainstream companies today, the fittings use EPDM O-rings, but also carry a whopping 10-year warranty as with the CPU block itself. They are tightened with an 8 mm hex key that is included with any six-pack of fittings, which allows for the smooth cap with no sharp edges, but means there is that small possibility of users over-tightening the fittings, especially if used with other blocks. The soft tubing fitting uses a typical barb, and the hardline fitting uses a thick 1/8" gasket instead of the typical thin O-rings to provide a more secure fit with the tubing. Oh, these individual fittings cost $12.50 and a six pack comes in at $75, which means these are among the most expensive fittings on the market.



Optimus Cooling also included a set of their older installation hardware with the package for my inspection, which is a lot more in line with the rest of the market as it has a set of mounting posts for the two CPU socket segments, thumb screws, springs, and plastic washers. The metal parts here are nickel plated instead of the satin black in the current hardware, and we also see an Intel socket backplate, which is out of plastic and has isolating pads that have sticky tape covers on them out of the box.