Report an Error

ASUS ROG Ally SSD 1 TB (WD SN740)

1 TB
Capacity
WD 20-82-10081
Controller
TLC
Flash
PCIe 4.0 x4
Interface
M.2 2230
Form Factor

Multiple hardware versions found.

Performance could vary due to unannounced flash/controller changes.

Front 2
Front 2
SSD Controller
Controller
The ASUS ROG Ally SSD is a solid-state drive in the M.2 2230 form factor, launched on May 9th, 2022. It is available in capacities ranging from 512 GB to 1 TB. This page reports specifications for the 1 TB variant. With the rest of the system, the ASUS ROG Ally SSD interfaces using a PCI-Express 4.0 x4 connection. The SSD controller is the 20-82-10081-A1 Polaris MP16+ from WD, a DRAM cache is not available. ASUS has installed 112-layer TLC NAND flash on the ROG Ally SSD, the flash chips are made by Kioxia. Please note that this SSD is sold in multiple variants with different NAND flash or controller, which could affect performance, the "Notes" section at the end of this page has more info. To improve write speeds, a pseudo-SLC cache is used, so bursts of incoming writes are processed more quickly. Thanks to support for the fast PCI-Express 4.0 interface, performance is excellent. The ROG Ally SSD is rated for sequential read speeds of up to 5,150 MB/s and 4,900 MB/s write; random IOPS reach up to 740K for reads and 800K for writes.
The SSD's price at launch is unknown. The TBW rating for the ASUS ROG Ally SSD 1 TB is unknown, too.

Solid-State-Drive

Capacity: 1 TB (1024 GB)
Variants: 512 GB 1 TB
Hardware Versions:
Overprovisioning: 70.3 GB / 7.4 %
Production: Active
Released: May 9th, 2022
Part Number: SDDPTQD-1T0
Market: Consumer

Physical

Form Factor: M.2 2230 (Single-Sided)
Interface: PCIe 4.0 x4
Protocol: NVMe 1.4
Power Draw: 0.07 W (Idle)
Unknown (Avg)
6.0 W (Max)

Controller

Manufacturer: WD
Name: 20-82-10081-A1 Polaris MP16+
Architecture: ARM 32-bit Cortex-R
Foundry: TSMC FinFET
Process: 16 nm
Flash Channels: 4 @ 1,600 MT/s
Chip Enables: 4
Controller Features: HMB (enabled)

NAND Flash

Manufacturer: Kioxia
Name: BiCS5
Type: TLC
Technology: 112-layer
Speed: 1200 MT/s
Capacity: 1 chip @ 8 Tbit
Toggle: 4.0
Topology: Charge Trap
Dies per Chip: 16 dies @ 512 Gbit
Planes per Die: 2
Word Lines: 128 per NAND String
87.5% Vertical Efficiency
Read Time (tR): 56 µs
Program Time (tProg): 484 µs
Die Read Speed: 571 MB/s
Die Write Speed: 66 MB/s
Endurance:
(up to)
3000 P/E Cycles
(100000 in SLC Mode)
Page Size: 16 KB
Block Size: 1344 Pages
Plane Size: 448 Blocks

DRAM Cache

Type: None
Host-Memory-Buffer (HMB): 64 MB

Performance

Sequential Read: 5,150 MB/s
Sequential Write: 4,900 MB/s
Random Read: 740,000 IOPS
Random Write: 800,000 IOPS
Endurance: Unknown
Warranty: Unknown
SLC Write Cache: Yes

Features

TRIM: Yes
SMART: Yes
Power Loss Protection: No
Encryption:
  • TCG Opal
  • TCG Pyrite
RGB Lighting: No
PS5 Compatible: Yes

Same Drive

This section lists other SSDs in our database using the exact same hardware components

Notes

NAND Die:

Although this Die is a 4-plane design, most Kioxia BiCS5 NAND Dies used in most SSDs are dual planes design because of Yield and production cost.
And because of the die being dual-plane the Throughput is cut in half to 66 MB/s per die.
There is no CuA (Circuitry under Array) in the Dual-Plane variant.
Typical Endurance: 1700 ~ 3000 P.E.C.
Typ. Endurance eTLC: 5.000 ~ 7.000 P.E.C.

Nov 15th, 2024 15:20 EST change timezone

New Forum Posts

Popular Reviews

Controversial News Posts