The Samsung 990 Pro (w/ Heatsink) is a solid-state drive in the M.2 2280 form factor, launched on August 24th, 2022. It is available in capacities ranging from 1 TB to 2 TB. This page reports specifications for the 2 TB variant. With the rest of the system, the Samsung 990 Pro (w/ Heatsink) interfaces using a PCI-Express 4.0 x4 connection. The SSD controller is the Pascal (S4LV008) from Samsung, a DRAM cache chip is available. Samsung has installed 176-layer TLC NAND flash on the 990 Pro (w/ Heatsink), the flash chips are made by Samsung. Please note that this SSD is sold in multiple variants with different NAND flash or controller, which could affect performance, the "Notes" section at the end of this page has more info. To improve write speeds, a pseudo-SLC cache is used, so bursts of incoming writes are soaked up more quickly. The cache is sized at 226 GB, once it is full, writes complete at 1400 MB/s. Thanks to support for the fast PCI-Express 4.0 interface, performance is excellent. The 990 Pro (w/ Heatsink) is rated for sequential read speeds of up to 7,450 MB/s and 6,900 MB/s write; random IOPS reach up to 1400K for reads and 1550K for writes.
At its launch, the SSD was priced at 309 USD. The warranty length is set to five years, which is an excellent warranty period. Samsung guarantees an endurance rating of 1200 TBW, a typical value for consumer SSDs.