The Nexus Portal NP50 by HYTE isn't just a fan+lighting controller. This is a fully integrated Arm processor-powered device that integrates control for several channels of addressable RGB LED lighting, PWM fan control, multi-zone temperature sensing, and noise sensing. The Nexus Portal application allows end users to find the perfect fan and lighting settings that take into account thermals and acoustics of the machine. The device tucks away into a 2.5-inch drive mount—ideally behind the motherboard tray—from where the various lighting and fan cables can be mounted to it. HYTE also showed off the PQ10 and PQ30 qRGB lighting strips, which provide 24-bit (True Color), and use the USB type-C based Nexus Link interface. The PQ10 is a 33 cm long, 20-diode array, while the PQ30 is a 1 m array with 63 diodes.

Liquid cooling major Bitspower, which sells both DIY and AIO liquid cooling solutions under its own brand, as well as serves as OEM for other brands, came out with a comprehensive lineup of new products at the 2023 Computex. We begin our stroll of their booth with the Summit lineup of CPU water-blocks and CPU area monoblocks. The company showed us their Summit series LGA4677 block for Intel Xeon W workstations, made of nickel-plated copper and POM acetal tops. These completely dwarf the company's Summit series blocks for AMD sWRX8/sTRX4 Threadripper sockets. The company also showed off a series of CPU area monoblocks. These are motherboard model-specific rather than socket-specific, because they have to be tailored not just for the socket, but also the components in its vicinity, such as CPU VRM.

The innovative new Summit M Silent is designed to reduce noise caused due to coolant flow (by bubbles and vortexes). This is essentially a nickel-plated copper plate that guides coolant through the micro-fin lattice. While the block material is copper with acrylic top, these blocks have additional brushed aluminium top-plates. The Summit M Pure lacks this feature, and is a typical copper+acetal block. Both the Summit M Pure and Summit M Silent come in Socket LGA1700 and Socket AM5 variants. The AMD variants have design-level optimization for the MCM layout of "Raphael," "Vermeer," and "Matisse." Bitspower also showed us a plethora of new fittings, including 45° extenders, 90° extenders, rotary fittings, and static ones. These come in four color options—black, brass, white, and chrome. All four are made of brass. The company also showed us their CR series flat-type and cuboidal reservoirs with provision for integrated pumps.

CORSAIR, a world leader in enthusiast components for gamers, creators, and PC builders, today announced the latest addition to its award-winning memory line-up, DOMINATOR TITANIUM DDR5 memory. Built using some of the fastest DDR5 ICs alongside patented CORSAIR DHX cooling technology for improved overclocking potential, DOMINATOR TITANIUM continues the DOMINATOR legacy with stunning design and blazing performance.

Sporting an elegant, fresh new design and built using premium materials and components, DOMINATOR TITANIUM DDR5 memory will be available for both Intel and AMD platforms, supporting Intel XMP 3.0 when paired with 12th and 13th-Gen Core processors or AMD EXPO for Ryzen 7000 CPUs. These technologies enable easy overclocking in just a couple of clicks on compatible platforms.

NZXT, a leader in PC gaming hardware and services, today announces the release of the Kraken and Kraken Elite. This new generation of popular coolers offers NZXT's coveted design and high-quality cooling while displaying essential data via NZXT CAM, a free software allowing users to monitor, control, and customize their NZXT products.

These new products are the latest versions of their award-winning all-in-one liquid CPU coolers series, the Kraken X-3 and Kraken Z-3 series. The Kraken Elite offers a 2.36" LCD screen with higher resolution and frame rate, better viewing angle, and higher color accuracy. This screen can display data from NZXT CAM and static or animated images with more clarity. The Kraken features a 1.54" LCD screen that can display system temperatures and static images from NZXT CAM.

More performance for RTX 4070Ti and RX 7900XTX GPUs! Alphacool expands its range of active water cooling solutions for NVIDIA RTX 4070Ti and AMD RX 7900XTX graphics cards with the new and innovative Eisblock Aurora cooler.

Thanks to the particularly filigree fin structure, the cooling surface has been enlarged and a very good water flow is made possible. The nozzle plate with revised inflow also distributes the water perfectly onto the cooling fins. This effectively dissipates the enormous heat generated by the new graphics card generation with the cooler. The full-surface chrome plating of the copper base not only provides lasting protection against acids, scratches, and damage, but also achieves a beautiful homogeneity and a special shine.

EK, the premium liquid cooling solutions manufacturer, is introducing brand-new magnetic levitation fans, the EK-Quantum Impulse 120 D-RGB. These premium Impulse fans feature EK's most abundant RGB implementation to date, with two LED-lit zones in the frame carrying 12 LEDs each, with another inside the rotor. These fans offer an optimized and balanced performance-to-noise ratio on the wide fan operational range.

EK-Quantum Impulse are 120 mm PC radiator and case fans optimized for rich and lush D-RGB effects while maintaining very silent operation across their entire operational range. There is one LED-lit zone around the frame on both sides of the fan, so no matter which fan orientation you require, you'll get the rich illumination of the addressable RGB diffused through a milky white cover. The rotor is also illuminated by its own D-RGB strip for stylish aesthetics while spinning.

The new Core cooler is now compatible with RX 7900 XT(X) GPUs! Alphacool offers with the new coolers not only the usual high quality, but also remarkable performance as well as functional design for AMD Radeon RX 7900 XT(X) graphics cards in custom design. The highlight of the copper cooler is the ensemble of connector terminal and cooler, which is milled from a single piece of copper. The excellent workmanship paired with the hard and resistant chrome plating of the entire copper cooler meet the highest quality standards. A key design element of the new Core series are the brass G1/4" threads, which are left in chrome and integrated on both sides. These stand out visually from the terminal.

The aluminium backplate, which is adapted to the design, forms a unit together with the terminal and convinces with clear and homogeneous optics on the back of the cooler. The individually controllable lighting consists of digitally addressable RGB LEDs and enables the even and dazzlingly colored illumination of the entire cooler.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. With the S70 RGB, S80 RGB and S90 RGB, Sharkoon is launching its first all-in-one CPU water-cooling solutions. The three models are equipped with high-performing addressable RGB PWM fans, a water block with a copper plate, and flexible, textile-braided tubing. The S70 RGB is the entry-level model, while the S80 RGB and S90 RGB are aimed at more demanding PC configurations.

The S70 RGB and S80 RGB both have a 240-millimeter radiator, while the S90 RGB has a larger 360-millimeter radiator. All three water-cooling systems come with RGB PWM fans. The RGB illumination is provided by addressable LEDs, while the speed of the fans can be adjusted within a range of 600 to 2,000 revolutions per minute. For easy cable management, the fans are connected in sequence by being "daisy chained".

Even more performance now also for RX 7900XTX Merc 310 GPU! Alphacool expands the assortment with the new and innovative Eisblock Aurora cooler for active water cooling of AMD RX 7900XTX Merc 310 graphics cards.

The enormous waste heat of the new graphics card generation is excellently dissipated with the cooler. Thanks to the particularly filigree fin structure, the cooling surface was increased and a very good water flow was made possible. The jet plate with revised inflow engine also distributes the water perfectly on the cooling fins. The full chrome plating of the copper base not only provides resistant protection against acids, scratches and damage, but also achieves remarkable homogeneity and significant gloss.

Eiswolf 2 AiO - now also for custom designs of RTX 4080/4090 and RX 7900XT/XTX GPUs! Alphacool presents additional innovative solutions for cooling Nvidia's Geforce RTX 4080 and 4090 and AMD's RX 7900XT/XTX graphics cards.

The enormous waste heat of the new graphics card generation is excellently dissipated with these coolers. The very good water flow and the large cooling surface are due to the particularly filigree fin structure. The jet plate with revised inflow engine also distributes the water perfectly on the cooling fins. The complete chrome plating of the cooler not only provides resistant protection against acids, scratches and damage, but also achieves a beautiful homogeneity and remarkable shine. The Aurora design of the cooler is kept visually calm and simple. This is evident not only in the cooler's design, but also in the wonderfully even lighting achieved via digitally addressable RGB LEDs.

A few days ago, PowerColor teased its upcoming flagship Radeon RX 7900 XTX Liquid Devil graphics card. Today, we have the first images coming from CornerJack of Overclocking.com. According to his unboxing, we can see the new collaboration of EK and PowerColor to create the latest Radeon RX 7900 XTX Liquid Devil graphics card with nickel-plated copper block based on Quantum Vector technology, addressable RGB illumination through the acrylic top, and a black backplate that is also presumably RGB illuminated to match the block as well. Powered by triple 8-pin connectors, the card features a BIOS switch that allows users to switch between OC BIOS and unleash BIOS modes, with the latter presumably having higher power limits.

In the box, besides the card, there is a provided EK loop pressure test that tests if any leaks are occurring. You can see the card's pictures below and look at the complete unboxing by CornerJack here.

PowerColor today teased its Radeon RX 7900 XTX Liquid Devil flagship graphics card. Designed for those with a DIY liquid cooling setup, the Liquid Devil essentially combines an RX 7900 XTX Red Devil PCB with a factory-fitted full-coverage water block. The water block is sourced from EK Water Blocks, just like with the previous-generation RX 6900 XT Liquid Devil, and is likely based on the company's Quantum Vector series, which combines nickel-plated copper primary material with a clear acrylic top that's studded with addressable RGB LEDs; and capped with vinyl decals specific to PowerColor. The card probably features a metal backplate with an illuminated PowerColor Devil logo. It remains to be seen if the Liquid Devil is differentiated from the air-cooled Red Devil OC Limited Edition with slightly higher factory-overclocks or power-limits.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. With the M30 Black and the M30 RGB, Sharkoon introduces new models, following on from its popular M25 series. Thanks to its unpretentious yet elegant design, the M30 Black should be able to be integrated harmoniously into any work environment. The M30 RGB, on the other hand, should primarily appeal to gamers thanks to a gaming-styled look with an RGB fan and a side panel made of tempered glass.

Both the M30 Black and the M30 RGB have an elegant, rather minimalist appearance with a clearly purposeful design. The center of attention is the front panel with rounded edges and a large perforated, mesh surface that should enable a strong airflow. Near the front of the top panel, both case versions have a modern USB Type-C connection for fast data transfer. There is also a generous amount of options for cooling: Each case offers space for up to seven 120-millimeter fans, and if the installation of a water-cooling system is desired, there is enough room for a radiator with up to 360 millimeters either under the top of the case or behind the front panel.

Now even more compatibility for Geforce RTX 40XX GPUs! Alphacool expands the range for active water cooling of Nvidia's Geforce RTX 4080 and 4090 graphics cards with the new and innovative Eisblock Aurora coolers.

Compared to the previous model of the cooler, several optimizations have been made, which perfectly dissipate the enormous waste heat of the new graphics card generation. The modified fin structure enables a very good water flow and increases the cooling surface at the same time. The modification of the jet plate with revised inflow engine furthermore perfects the distribution of the water on the cooling fins. The chrome plating of the copper base over the entire surface not only provides resistant protection against acids, scratches and damage, but also achieves a beautiful homogeneity and special shine.

Even more performance for RTX 4080 Suprim/Strix and RX 7900XT (X) GPUs! Alphacool presents new and innovative solutions for active water cooling of NVIDIA's GeForce RTX 4080 as well as AMD Radeon RX 7900XT (X) graphics cards with the Eisblock Aurora coolers.

In order to dissipate the enormous waste heat of the new graphics card generations in the best possible way, numerous optimizations were implemented on the water cooler compared to the previous models of these coolers. The fin structure has been modified and allows an optimal water flow while increasing the cooling surface. The modified jet plate with improved inflow engine ensures the best possible distribution of water on the cooling fins. The fully chrome-plated copper base is resistant to acids, scratches and damage. In addition, the chrome plating provides homogeneity and shine that cannot be achieved by nickel plating.

Cooler Master at the 2023 International CES introduced several new case fans for various use-cases—case ventilation, air-heatsinks, and liquid-cooling radiators. The MasterFan Halo2 is the brightest and most striking of these, and the company is including them with some of their latest Hyper-series CPU coolers. They will be sold in standalone kits, too. The Halo2 gets its name from its two ARGB LED lighting zones—one along the bore of the frame, and the other inside the impeller hub. There are a couple of upgrades of the original MasterFan Halo series from 2020, including enlarged fan blades, a redesigned hybrid frame structure that minimizes frame footprint without sacrificing the fan's axial airflow; and updated motor driver IC. The MF Halo2 comes in 120 mm and 140 mm sizes; and in black- and white color trims. Both sizes feature rifle bearings that are rated for over 160,000 hours of operation.

The MasterFan MF140 Halo2 features up to 1,600 RPM of speed, up to 58.5 CFM airflow, at up to 2.53 mm H₂O static pressure, and up to 27 dBA noise output. The MF120 Halo2 turns at speeds of up to 2,050 RPM, pushing up to 51.88 CFM of airflow, at up to 2.89 mm H₂O static pressure, and up to 27 dBA noise output. The fans take 4-pin PWM for their main function, and 3-pin Gen 2 ARGB for both their lighting zones.

ENERMAX, an industry-leading force dedicated to design extreme performance computer power supplies and cooling solutions, announces a range of new products at CES 2023 designed for the increasing power demands of new graphic cards including its first ATX 3.0 power supply, the Revolution ATX 3.0; and a fully upgraded 80 PLUS Gold certified power supply, the Revolution D.F. 2; the high-performance CPU AIO liquid cooler series, the AQUAFUSION ADV and the next-generation mesh panel gaming PC case with superior ventilation potential, the Marbleshell MS31 & MS21.

Revolution ATX 3.0 series is ENERMAX's first power supply that is fully compatible with Intel ATX 3.0 specification. To prepare for the next-gen graphics cards, the series is designed with one native PCIe Gen 5 12+4 pin 12VHPWR connector with power output up to 600 W, an extra one dual 8 pin to 12+4 pin (12VHPWER) cable will also be included for gamers and creators to install up to 2 of the latest NVIDIA graphics cards to enjoy the most advanced performance.

A relatively new entrant to the PC cooling space, Iceberg Thermal had its first major in-person outing at CES, with the exhibition of several of its newest CPU coolers, purpose-built heatsinks, case fans, and thermal pastes. To begin with, the company showed off its IceGale Xtra, IceGale ARGB, and IceGale Silent case fans. The IceGale Xtra comes in 80 mm, 120 mm, and 140 mm sizes, and in color options of icy-blue, gray, and black. These fans lack illumination, but offer a solid combination of high RPM range and dual-ball bearings. The IceGale ARGB fans are essentially the same, but come only in 120 mm and 140 mm sizes, and only in icy-blue and black frame options. These ones feature addressable RGB LEDs in the fan impeller hub, with the frost-finish impeller blades diffusing the light. The IceGale Silent series is a line of entry-level case fans that come in 120 mm size and black trim, with sleeve bearings. The fan is claimed to offer a noise output of just 12.3 dBA.

The FuzeIce thermal interface material ships in flattened piston syringes that double up as applicators. This is an electrically non-conductive TIM that offers thermal conductivity of 11.25 W/mK, 56,000 poise viscosity, and 2.6 g/cm³ density. It comes in 3.5 g and 7 g syringes. Iceberg Thermal also showed off a wide range of custom-design heatsinks that are purpose-built for a wide range of cooling needs. These are not sold to customers in the retail channel, but the company is looking to become an OEM for purpose-built air-cooling solutions. Moving on to the good stuff, and we see the company show off a trio of its IceSleet series CPU coolers for the DIY retail channel. These include the IceSleet G4 OC, IceSleet G4 Midnight, IceSleet X5, IceSleet X6, IceSleet X7 Dual, IceSleet X9 Dual, and a couple of IceFloe low-profile coolers.

Most PC peripheral companies betting big on addressable RGB lighting have shown off some room lighting products, but one of them that stand out for us is a lesser-known brand called Twinkly. Their device is a tiny 15 cm x 15 cm tile that has 64 squares, each with an addressable RGB LED. You daisy-chain several of these tiles as shown in the example below, and create some amazing wall-art that you can show off as a backdrop in your game stream. These tiles are controlled by a PC software that lets you program them whichever way you want them—cycle presets, work as ambient lighting, or even mirror your main display.

Thermaltake this CES updated its entire premium PSU product-stack with the introduction of several new models that meet the ATX 3.0 and PCIe Gen 5 specifications; and come with native 16-pin ATX 12VHPWR power connectors that can deliver up to 600 W of continuous power, and tolerate excursions within the PCIe Gen 5 spec. The ToughPower iRGB Titanium comes in 1250 W and 1650 W capacities, and is 80 Plus Titanium certified. The 140 mm fans cooling these beasts come with 18 addressable RGB LEDs. Both models include two 16-pin 12VHPWR connectors, and support a feature-rich monitoring software from which you can also control the fan and its lighting.

The ToughPower PF3 comes in capacities of 750 W, 850 W, 1050 W, and 1200 W; offers 80 Plus Platinum efficiency, a compact 14 cm body depth, and at least one 16-pin 12VHPWR connector. The ToughPower GF3 ARGB series makes the new-generation connectivity more affordable, and comes in the same 750 W, 850 W, 1050 W, and 1200 W capacities, but with 80 Plus Gold efficiency, and an illuminated 140 mm cooling fan. The highlight here has to be the new ToughPower SFX series, which comes in high-Wattage 850 W and 1000 W models, purely SFX form-factor, offer 80 Plus Platinum efficiency, and at least one 16-pin 12VHPWR connector.

Thermaltake unleashed a wealth of new PC cooling products across a whole range of form-factors and applications. The star attraction, though, is a cool new accessory the company calls the Pacific TF3 Liquid Cooling System Dashboard. This accessory is intended to be installed in place of the rear 120 mm case-fan, and plumbed to your DIY liquid-cooling setup. It puts out real-time analog readouts of the ambient temperature inside the case, the coolant temperature, and coolant pressure, through three analog gauges.

The company updated the stackable SwaFan line of radiator fans. These fans can be "joined at the hip" in clusters of up to three, so you can ventilate a 360 mm radiator without cables sticking out of each individual fan. With the SwaFan EX, the inter-fan "bridge" handles PWM power, as well as addressable RGB. Thermaltake made improvements to inter-fan coupling by leveraging magnetic joints (similar to a MagSafe connector); adding detachability to the impeller (making it easy to clean); and introducing two sets of ARGB LEDs (the first one inside the impeller hub, and the second one along the bore of the frame), with a total of 20 diodes per fan. The SwaFan EX comes in 120 mm and 140 mm sizes.

Also at the 2023 International CES, be quiet! showed off its new and upcoming thermal interface materials and new Light Wings lines of case/radiator fans. The DC2 PRO is an enthusiast-grade liquid-metal thermal interface material for high-performance applications, targeting overclockers who know how to handle liquid metal. The company wouldn't put out thermal conductivity numbers but mentioned that the DC2 PRO should be competitive with the best liquid-metal TIMs out there (north of 70 W/mK). The DC2 (non-PRO) is a conventional ceramic base TIM that's electrically non-conductive, and can be used with bare copper surfaces (such as coolers with direct-touch heatpipes). We expect this one's conductivity to be north of 10 W/mK.

be quiet! also showed off its Light Wings White 140 mm fans in two variants, one with a standard RPM range, and another with an undisclosed high-RPM limit. These fans feature high-endurance dynamic bearings, 4-pin PWM control, and 3-pin ARGB control for their addressable RGB LED diffusers along the bore of the frame. These are sold in packs of 3.

Last year it felt like DDR5-6000 to DDR5-6400 was the top of the PC memory food-chain, and in a year, this has been pushed up to DDR5-8000. Platforms such as the 13th Gen Core "Raptor Lake" can already handle such high memory speeds, and ADATA has designed such a memory module that includes an Intel XMP 3.0 profile that enables the advertised DDR5-8000 speed at the click of a button. The new ADATA XPG Caster RGB DDR5-8000 features a chunky aluminium heatspreader that's crowned by a silicone addressable RGB LED diffuser. It's been tested for compatibility with both Intel and AMD platforms, however only an XMP 3.0 profile is included.

Elsewhere across the ADATA booth, we also came across the company's latest SD 8.0 memory card that uses PCI-Express 3.0 x2 physical layer and NVMe 1.3 protocol layer, to offer sequential speeds of up to 1600 MB/s reads, with up to 1300 MB/s writes, including LDPC ECC. The card comes in 256 GB and 512 GB capacities, and is backwards-compatible with UHS-I devices. Back at the memory section, we found an XPG + ASUS ROG co-branded Lancer ROG DDR5 memory that comes at speeds of up to DDR5-6600. Lastly, there's the ACE-6400, a mid-range DDR5-6400 memory module targeting creators, that runs at DDR5-5600 native (JEDEC), and its advertised DDR5-6400 using an XMP 3.0 profile.

Even more performance for RTX 4070 Ti GPUs! With the Eisblock Aurora cooler, Alphacool presents a new, innovative solution for active water cooling of Nvidia's Geforce RTX 4070 Ti graphics cards in the reference design.

In order to dissipate the enormous waste heat of this graphics card generation, in the best possible way, numerous optimizations have been carried out on the water cooler compared to the cooler models of the 30XX card generation. The fin structure was adapted and enables an optimal water flow while simultaneously increasing the cooling surface. The modified nozzle plate with improved Inflow Engine ensures the best possible distribution of water on the cooling fins. The fully chrome-plated copper base is resistant to acids, scratches and damage. In addition, the chrome plating provides homogeneity and reflectivity that cannot be achieved by nickel plating.

With the Eisbecher Aurora reservoir in combination with the VPP Apex pump, Alphacool presents another stylish reservoir/pump combination. The combination of the classy Eisbecher with the elegant, powerful VPP Apex D5 pump results in a setup that should not be missing in any performance-oriented water cooling system.

The tube of the reservoir is made of real glass. The digitally addressable RGB LEDs in the pump top provide brilliant illumination and beautiful light reflections. A special ambient highlight is the illuminated fountain effect of the riser tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoir tanks. With the 4-pin fan connector, the speed of the pump can be read and controlled by PWM signal. Power is supplied to the Apex VPP via the SATA connector. The maximum head of 4.25 m and the potential flow rate of 340 L/h are clear arguments for using the pump in combination with the Eisbecher Aurora reservoir.