AeroCool today introduced the Cylon 3H, a top-flow CPU cooler. The cooler features a "C-type" aluminium fin-stack design. Three 6 mm-thick copper heat pipes make direct contact with the CPU at the base, conveying heat through an aluminium fin-stack that's arranged along the plane of the motherboard, and ventilated by a 120 mm fan. This fan features an addressable RGB illumination through a silicone diffuser around the bore of the impeller. AeroCool claims that the cooler can handle thermal loads of up to 125 W.

The included 120 mm fan of the Cylon 3H features a 60,000-hour rated hydraulic bearing, takes in 4-pin PWM for its main function, and 3-pin ARGB for the illumination, turns between 600 to 1,800 RPM; pushing up to 60.8 CFM of air-flow at 1.48 mm H₂O static pressure, at up to 24.3 dBA noise output. With its fan in place, the cooler measures 126 mm x 138 mm x 98 mm (WxDxH). Among the CPU socket types supported are AM4, LGA1200, and LGA115x. The company didn't reveal pricing.

Raijintek today rolled out the Eleos RBW, an entry-level tower-type CPU cooler with addressable RGB illumination. The cooler features a conventional aluminium fin-tower type heatsink. Four 6 mm-thick copper heat pipes make direct contact with the CPU at the base, conveying heat through an aluminium fin-stack, which is ventilated by a 92 mm fan. The fin-stack heatsink features a plastic top-plate with an addressable RGB LED diffuser, the ARGB illuminated fan puts out additional bling.

The included 92 mm fan features 40,000-hour rated hydraulic bearings, spins between 800 to 2,000 RPM, pushing up to 52 CFM of air-flow, 1.9 mm H₂O static pressure, with up to 22.95 dBA noise output. The cooler measures 140 mm x 96 mm x 75 mm (HxWxD), weighing 580 g. Out of the box, the cooler comes with push-clips, so you can mount the cooler onto AMD Socket AM4 without needing any tools. Other sockets supported include LGA1200, LGA115x, and LGA2066. The company didn't reveal pricing.

CORSAIR, a world leader in PC gaming peripherals and enthusiast components, today announced a new range of high-performance DDR4 memory kits to its renowned VENGEANCE RGB PRO lineup, CORSAIR VENGEANCE RGB PRO SL. Initially available in a wide range of frequencies up to 3,600MHz and kits up to 128GB (4x32GB) in both black and white, VENGEANCE RGB PRO SL boasts dynamic ten-zone RGB lighting in a form-factor just 44mm tall, offering wide compatibility with nearly any PC build. Each module is tightly screened and optimized for peak performance and overclocking potential, for memory that matches its mesmerizing visuals with equally impressive performance.

At 44mm tall, VENGEANCE RGB PRO SL's compact form-factor enables compatibility with a multitude of CPU cooler options, including dual-fan AIO liquid CPU coolers and many air coolers such as the CORSAIR A500. Ten individually addressable RGB LEDs per module are massively customizable through CORSAIR iCUE software, and can be synchronized with all iCUE-compatible devices throughout your setup for stunning lighting effects across the entire iCUE ecosystem.

GIGABYTE is ready with its GeForce RTX 3080 Gaming OC WaterForce WB graphics card. This card is extensively based on the company's more affordable Gaming OC custom-design RTX 3080 PCB, but comes with a factory-fitted full-coverage water-block, and is targeted at those with DIY liquid cooling setups. GIGABYTE sells another such custom RTX 3080 card, the RTX 3080 AORUS Xtreme WaterForce WB, which is based on the top-tier AORUS Xtreme PCB. The new RTX 3080 Gaming OC WaterForce WB is about 32 cm in length, same as the air-cooled card it's derived from, is 2 slots thick, and standard height. In comparison, the AORUS Xtreme WaterForce WB is 25.2 cm in length (just about the length of the PCB), 16.3 cm tall, and the block is single-slot thick, although its I/O forces it to be 2-slot.

The GIGABYTE RTX 3080 Gaming OC WaterForce WB uses nickel-plated copper as its primary material for the water-block, capped by an acrylic top that's mostly covered by by a plastic+metal shroud. The top is studded with addressable RGB LEDs that can be controlled using GIGABYTE's RGB Fusion software. The card comes with the same 1800 MHz GPU Boost factory-OC as its air-cooled sibling (compared to 1710 MHz reference). It does not come with the leak-detection feature you get with the AORUS Xtreme WaterForce WB. Connectivity includes three DisplayPort 1.4a and two HDMI 2.1 connectors. The card pulls power from two 8-pin PCIe inputs. The company didn't reveal pricing.

Update Mar 3rd: It appears that Gigabyte has used misleading renders and false claims when it comes to the composition of the water block. Recent findings from Igor's Lab confirm the use of mixed metals, including aluminium on the water block itself, that can lead to galvanic corrosion and blockage of the microfins over the GPU.

EK, the leading computer cooling solutions provider, is expanding its All-In-One product line with two new products: EK-AIO Basic and EK-AIO Elite Aurum 360 D-RGB. Following the success of EK-AIO D-RGB that comes in three different sizes and EK-AIO Elite with the push-pull configuration, the new EK-AIO Basic now creates a balance in the EK's AIO portfolio by offering a price-competitive, all-black, non-RGB option. The second EK-AIO product making its debut is the Special Edition EK-AIO Elite Aurum - a golden variant of the popular EK-AIO Elite. It boasts a glossy, gold-like nickel finish on the pump cover and fittings for those who want their PCs to sparkle.

The EK-AIO Basic is available in 240 and 360 mm radiator models. These are all-black all-in-one liquid cooling solutions for modern AMD and Intel CPUs. Visually, EK-AIO Basic is minimalistic with a black brushed aluminium-like pump cover and black fans. These performance-focused AIOs offer all the benefits of a water-cooling solution in a compact, easy to install, and maintenance-free design. They are simple, efficient, and come without any RGB lighting. By keeping the aesthetics minimal, EK-AIO Basic can be more competitive price-wise than the pioneering trio with D-RGB implementation.

[Editor's note: Our review of the CORSAIR 5000D AIRFLOW can be found here]

CORSAIR, a world leader in high-performance gaming peripherals and enthusiast components, today announced a new series of mid-tower ATX cases to suit nearly any build: the CORSAIR 5000D, 5000D AIRFLOW, and the iCUE 5000X RGB. Every 5000 Series case offers simple and tidy cable management thanks to the CORSAIR RapidRoute cable management system, terrific cooling from included fans featuring CORSAIR AirGuide technology, and a spacious interior that fits multiple radiators, including two 360mm simultaneously. Between the understated styling of the 5000D, the optimized airflow of the 5000D AIRFLOW, and the eye-catching RGB lighting behind four beautiful tempered glass panels of the 5000X RGB, the 5000 Series has a case to meet any builder's priorities.

Debuting in the recently launched 4000 Series, the CORSAIR RapidRoute cable management system has proven to be a hit with PC builders looking to minimize the hassle of cable routing while still achieving a clean, professional look for their system. The 5000 Series takes RapidRoute even further, with a concealed cutout, wide enough to fit all major connectors to your motherboard, and multiple removable routing channels through which you can run all your cables out of sight. With a generous 25mm of cable routing depth behind the motherboard, and a magnetic door behind which to hide your cabling, it's exceptionally easy to build a top-tier PC that also looks the part.

ARCTIC, one of the leading manufacturers of low-noise PC coolers and components, is bringing a powerful LED case fan to market for the first time with its BioniX P120 A-RGB. The pressure-optimized, PWM-controlled 120 mm fan comes with 12 addressable RGB LEDs for a customisable color experience.

The fan blades of the BioniX P120 A-RGB generate a focused airflow, ensuring highly efficient cooling even with increased air resistance on heatsinks, radiators and covered case vents. The newly developed ARCTIC motor and the high-quality bearings ensure smooth running and a particularly long service life. The fan speed of the BioniX P120 A-RGB can be adjusted synchronously with other fans in the speed range from 400 to 2300 rpm.

PowerColor Tuesday teased its upcoming Radeon RX 6800 XT and RX 6900 XT Liquid Devil series graphics cards. These cards are targeted at those with DIY liquid cooling setups, and come with factory-fitted full-coverage water blocks. The blocks are custom-made for PowerColor by EK Water Blocks. It's likely that PowerColor is reusing the PCBs from its Red Devil line of flagship air-cooled cards. The blocks feature nickel-plated copper as their primary material, with clear acrylic tops that are studded with addressable RGB LEDs that plug into the PCB's LED header.

Tech innovator GELID Solutions unveils the latest ARGB extension cable series featuring sophisticated lighting and 18 AWG multilayer single sleeved wiring. The ASTRA is a product of GELID Solutions GAMER product line. The ASTRA comes with the special braided fiber-optic module and 24 ultra-bright RGB LEDs (16 RGB LEDs in the 8-Pin/16-Pin cable version) boasting unboundedly vivid RGB lighting. It's super easy to install, also easy to flex and bend, and the cable assembly is tailored to a thickness of just 20 mm to ensure hassle-free connectivity to your motherboard and GPU.

The cable wiring is built upon 18 AWG copper wires and carries multilayer single sleeving to provide enhanced reliability, improved heat resistance and better power efficiency. The ASTRA features ARGB Sync via the two integrated 3-Pin ARGB cables and supports all modern motherboards with addressable RGB functions: ASUS, Gigabyte, MSI or ASRock. You can use any lighting preset or design your own vivid flaring effects with compatible ARGB software. Additionally, the integrated ARGB cables are complemented by daisy-chain headers and protective cable-caps to facilitate connectivity inside your PC.

SilentiumPC, the European manufacturer of CPU coolers, Power Supply Units and PC cases, extends the recently introduced Ventum PC Case series by four new models. The new midi-towers are designed to meet the demands for airflow-oriented systems with the latest high-end components.

The Ventum VT4 line-up offers exceptional air-flow, which has been achieved by incorporating mesh in the front and top of the chassis. In addition to that, even the interior layout has been optimized to further improve the flow of air from the front to the back and the top, depending on the user's preference. While the Ventum VT4 TG base model comes with two pre-installed 120 mm case fans, the Ventum VT4V TG and the Ventum VT4V Evo TG ARGB (Black or White) are equipped with four case fans out of the box.

LIAN LI Industrial Co. Ltd., a leading manufacturer of aluminium chassis and PC accessories, is proud to announce the popular UNI FAN are now available in a 140 mm format with the SL140, and that the STRIMER PLUS line up has been expanded with the STRIMER PLUS TRIPLE 8 Pin for power-hungry GPUs such as the 3000 series. With the new UNI FAN and STRIMER PLUS, LIAN LI fills the gap to cover all types of build configurations and address the needs of all PC DIY enthusiasts.

Now available in 140 mm format, the black and white SL140 is a high static pressure PWM fan with addressable RGB LEDs. Keeping the patented quick-connect daisy-chaining system at the core of its design, the new UNI FAN continues to simplify installation and cable management. Each UNI FAN SL140 offers great performance with speeds ranging between 500 to 1500rpm. Thanks to the fluid dynamic bearing technology, the SL140 can provide 70.5CFM of airflow and 1.67 mm H₂O of air pressure at a maximum of only 30 decibels at full speed. In addition, the 32 addressable LEDs provide smooth customizable lighting effects that shine through the diffuser on each side of the fan. Both speed and lighting effects can be controlled via L-Connect, a LIAN LI developed software that provides intuitive management of the fan profiles and allows easy switching to motherboard software control if desired.

CORSAIR, a world leader in high-performance gaming peripherals and enthusiast components, today announced the immediate availability of a wide range of NVIDIA GeForce RTX 30-Series compatible water blocks in its award-winning Hydro X Series of custom cooling parts. The new range of Hydro X Series XG7 RGB GPU Water Blocks delivers exceptional cooling performance and unrivaled aesthetics for GeForce RTX 3080 and 3090 Founders Edition, ASUS ROG STRIX, MSI VENTUS, and dozens of reference design graphics cards. A full compatibility list for all supported models is online at https://www.corsair.com/custom-cooling-configurator/gpu-search.

Equipped with more than 50 high-density cooling fins, a full-length aluminum backplate, and 16 individually addressable RGB LEDs, the new water blocks allow enthusiasts to experience all the benefits of custom liquid cooling alongside the breakthrough performance of NVIDIA's GeForce RTX 30-Series graphics cards.

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, releases a new color option, white, for All-In-One CPU liquid cooler, LIQMAX III 360 ARGB, designed to display fascinating addressable RGB lighting effects by synchronizing with ASUS Aura Sync, ASRock Polychrome, GIGABYTE RGB Fusion, and MSI Mystic Light Sync. LIQMAX III ARGB series is compatible with both Intel and AMD CPU sockets (except Socket TR4/SP3).

The white CPU AIO liquid cooler is composed of white fan frames, tubes, and radiator to show your system's uniqueness and addressable RGB lighting effects. It also has the luminous addressable RGB fan and Aurabelt water block to experience RGB lighting wonderland. The included control box provides 10 lighting effects for users to select light colors, which no need to install any software.

Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. With the TG5 RGB Silent PCGH Edition, Sharkoon presents an ATX case that aims to impress not only with its looks but also with its low noise level. The case is based on the visual design of the predecessor model. However, in cooperation with the computer magazine PCGH, a redesign has been made in order to keep the noise level as low as possible.

For the design of the TG5 RGB Silent PCGH Edition, corresponding changes were made to the case in order to be able to reduce the overall volume of the system during operation. For this purpose, insulating mats have been integrated in the top and side panel, which, in combination with the completely closed covering of the case, contribute to a reduction of noise. In addition, special fans are installed in the case which maintain a quiet and smooth operation at 800 revolutions per minute without sacrifices being made in cooling performance.

LIAN LI Industrial Co. Ltd., a leading manufacturer of aluminium chassis and PC accessories, is proud to give GALAHAD AIO enthusiasts the opportunity to complete their builds with the ST120, available in packs of 3, in black and in white. In addition, LIAN LI launches the ARGB Cable Kit for LIAN LI ARGB devices to solve the issue of port scarcity on modern motherboards to connect all devices. Creating a unified look and solving the headache of interconnectivity has never been easier.

Now available separately from the GALAHAD AIO, the ST120 offers users a way to improve their system performance while getting a uniform look. The high static pressure ST120s are PWM fans which operate between 800 and 1900 RPM, and deliver a maximum airflow of 69.17 CFM and air pressure of 2.6 mmH20, making them ideal replacement fans for any AIOs capable of hosting 120 mm fans.

Sharkoon Technologies is an international supplier of quality, high-performance PC components and peripherals. Sharkoon Technologies now presents the RGB Slider, a new midi ATX case with a compact format. The case has a minimalist and simple design, and despite its low price range, it still has special features such as a side panel made of tempered glass and a front panel with an integrated RGB LED strip.

Thanks to its black finish and simple form, the RGB Slider makes a straightforward and unobtrusive impression. For subtle visual variation, the matt black front panel contains an RGB LED strip that can be illuminated in 14 preset color modes via the built-in addressable RGB controller. The lighting of the RGB LED strip can be freely adjusted through compatible mainboards with a 5 V-D-coded-G or 5 V-D-G pin header and using software such as ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion and ASRock Polychrome SYNC. The integrated RGB controller also allows the connection of further RGB components.

EVGA over the weekend launched an extensive lineup of GeForce RTX 30-series graphics cards that either feature liquid cooling, or come with preparation for DIY liquid cooling. The EVGA Hydro Copper line of graphics cards include the RTX 3090 FTW3 Hydro Copper, RTX 3090 XC3 Hydro Copper, RTX 3080 FTW3 Hydro Copper, and RTX 3080 XC3 Hydro Copper. These are essentially the same FTW3 or XC3 graphics cards EVGA debuted its RTX 3090 and RTX 3080 lineups with, but come with factory-fitted, full-coverage water blocks. These blocks are made of nickel-plated copper, with clear acrylic tops that have a plastic top-plate with a printed pattern similar to the one found on the back-plates. The tops are studded with addressable RGB LEDs which are connected directly to RGB controllers on the PCB, and can be controlled via the Precision X1 software. These cards have the same factory-overclocked speeds as their air-cooled siblings, but are priced about $150-200 higher.

Next up, are the Hybrid Cooling line of graphics cards, which feature factory-fitted, all-in-one, closed-loop, liquid cooling solutions. Much like the FTW3 and XC3 Hydro Copper series, we see EVGA reuse its RTX 3090 and RTX 3080 FTW3 and XC3 PCBs to carve out their Hybrid Cooling variants. The FTW3 Hybrid Cooling cards feature addressable RGB illumination on the radiator fans, while the XC3 Hybrid Cooling series cards lack illumination on the cards. All four variants feature 240 mm x 120 mm radiators, and a pair of included 120 mm fans. The cooling solution features a pump-block cooling the GPU, while a series of heatsinks and a lateral fan cool the memory and VRM components. These cards have a similar $150-200 premium over the air-cooled FTW3 and XC3 cards.

In addition to the Neon 122 tower-type air CPU cooler, Super Flower announced the Neon 240 and Neon 360 all-in-one, closed-loop, liquid CPU coolers. Unless we're mistaken, these CLCs appear to be DeepCool-sourced, looking at the design of their pump-blocks. As their names suggest, the two are differentited with radiator sizes, with the Neon 240 featuring a 240 mm x 120 mm radiator, and the Neon 360 featuring 360 mm x 120 mm.

The pump-block features a copper cold-plate, a latest-gen dual-chamber pump, Nylon sleeved tubing, and aluminium-fin radiators that, depending on the variant, are ventilated by two or three included 120 mm fans. Each of these hydraulic bearing fans spin between 800 to 1,800 RPM, pushing 46 CFM of air, with up to 29.7 dBA maximum noise output. The fans, along with the ornament on top of the pump-block, feature addressable RGB illumination. The Neon 240 supports AM4, LGA1200, LGA115x, and LGA2066 sockets, while the Neon 360 also includes support for TR4 and sTRX4 in addition to those. The coolers include an RGB controller with an RF remote control. The company didn't reveal pricing.

Super Flower, known more for its power supplies, entered the PC cooling products market with the Neon 122 CPU air cooler. The cooler features a tower-type aluminium fin-stack heatsink that's ventilated by a single 120 mm fan. Four 6 mm-thick copper heat pipes make direct contact with the CPU at the base, pulling heat through the aluminium fin-stack, where it is dissipated to the 38.5 CFM airflow of the 120 mm hydraulic bearing fan that spins between 800 to 1,800 RPM, with a noise output of up to 23 dBA. The top-plate of the heatsink features a silicone diffuser and a brushed aluminium bezel. This diffuser is studded with 32 addressable RGB LEDs. The fan, too, features 8 LEDs in the impeller hub, diffused through the frosted impeller. Super Flower claims that the Neon 122 can handle thermal loads of up to 120 W (TDP). Measuring 127 mm x 156 mm x 76 mm (WxHxD), it weighs 700 g. The company didn't reveal pricing.

EK, the premium liquid cooling gear manufacturer, is updating EK-Classic Kits by rolling out a special Black Nickel Edition, and that's not where the magic ends. These new, special edition, Classic kits are available for the same price as the previous Classic kits, even though there are now more fittings included.

EK-Classic CPU Water Block 115x/20xx/AM4 D-RGB - a high-end, nickel-plated copper CPU water block for modern Intel and AMD processors. It uses addressable RGB LEDs to light up your CPU area. It features a classic, market-proven design that will perfectly fit the needs of enthusiasts and demanding users. The tool-less mounting system makes the installation process a breeze even for beginners. This block comes with a pre-installed Intel mounting system while the AMD AM4 mounting system is in the packaging and needs to be installed if needed.

For AMD Ryzen 5000 Series desktop processor, ASRock, a leading global motherboard manufacturer, has launched the X570 PG Velocita. It is a new crew of Phantom Gaming series designed to meet the needs of high-end gamers and the best choice for high price-performance build. "We've heard the voice of online gamers! The Killer networking on the X570 PG Velocita offers the uninterrupted online experiences and makes gamers beat all competitors in an instant!" said Chris Lee, general manager of ASRock motherboard business unit.

Users may well spot on the phantom gaming logo's difference! The blazing fire in the core symbols the higher transmit rate. Users can enjoy the PCI express 4.0 with double bandwidth from previous generation. At the same time, the whole new Killer Ethernet & Wifi offer a faster and more reliable networking for gamers towards perfect gaming experiences. The cool color around contrasts quite markedly with the flame inside, making the design code of phantom gaming full of mystery. The frame-break shield integrates all elements above, showing temperament of domineer and unbeatable strength of new Phantom Gaming.

ID-Cooling today unveiled the Ice Flow ARGB Snow line of all-in-one liquid closed-loop CPU coolers. These are essentially a whitewash of the original Ice Flow ARGB series the company unveiled in July 2020. With silvery white taking over the cooler's CPU block, its Nylon tubing sleeves, the radiator (including its aluminium fins), the compound fan's frame, and the impeller. The impeller is still studded with addressable RGB LEDs at the hub. A unique feature with the Ice Flow ARGB series is the location of the pump+reservoir, which is at the radiator, rather than integrated with the CPU water block. The Ice Flow ARGB flow debuts with a 240 mm x 120 mm variant that has a dual impeller compound fan. The cooler has the same specs and cooling capacity (of 250 W) as the original. The company didn't reveal pricing.

EK, the leading computer cooling solutions provider, is launching its premium high-performance GPU water block for the EVGA XC3 edition of NVIDIA GeForce RTX 30 Series graphics cards. The new water block is named EK-Quantum Vector XC3 RTX 3080/3090 D-RGB and is exclusively engineered for the EVGA XC3 RTX 3080 and RTX 3090 GPUs. The EK-Quantum Vector XC3 RTX 3080/3090 water block is compatible with EVGA XC3 RTX 3080 and 3090 graphics cards. This Vector water block actively cools the GPU, top-facing VRAM, and inductors and MOSFETs in the VRM section.

These newly developed XC3 water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. An Open Split-Flow cooling engine design is implemented, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation, unlike some products that are currently available on the market.

This month, a true cooling giant is increasing ARCTIC's extensive range of high-performance CPU coolers: the multi-compatible dual tower cooler Freezer 50. Gloves off for the next round: ARCTIC's Freezer 50 TR successfully took on the challenge of taming the monster CPU, AMD's Ryzen Threadripper. Now, the Freezer 50 enters the ring with a broader attack. The distinctive design and the impressive performance remain, while its wide compatibility with current Intel and AMD CPUs is new.

The imposing dual-tower cooler is one of the most powerful air coolers that ARCTIC has developed. Equipped with six massive U-shaped, direct-touch heat pipes 104 aluminium fins and two fans, the Freezer 50 achieves the best heat dissipation and excellent cooling performance. A combination of a 120 and 140 mm P-Fans in push-pull configuration is used, producing strong airflow without compromising on volume—even at maximum speed, the Freezer 50 only reaches 0.4 sone.

Razer, the leading global lifestyle brand for gamers, made October 10, 2020 a day to remember for the global gaming community. Fans across the world tuned in to the inaugural RazerCon to watch Razer CEO Min-Liang Tan's live mixed-reality keynote - a one-of-a-kind interactive session hosted against the iconic Singapore skyline. This was followed by Razer panels on new and unannounced products, and exclusive content showcases and giveaways from game studios such as Romero Games, Perfect World Entertainment, Paradox Interactive and technology partners such as Intel, NVIDIA and Western Digital.

The event was a huge hit with the fans, peaking at over 1 million concurrent viewers with a total of more than 250,000 hours viewed and 175 million impressions across Twitter, Facebook, YouTube, and Twitch. In a true celebration of all things gaming, highly decorated veterans of the industry, including Brenda and John Romero, and Haz Dullul, presented their newest projects, whilst leading gaming celebrities CloakZy, CourageJD, PaladinAmber and many others engaged with the community during their sessions.