That fan makes the board seem cheap and I'm not sure why, but it does.
I wish EVGA would've fixed their LGA 2011 boards before focusing on their Z77 lineup. It seems like their motherboard section doesn't care anymore lately.

I wish Asus Z77 full ATX ROG boards have the slot layout of this one. Having the first slot unusable is bad...

The first thing I would have to do is to get rid of that fan thingy, which would void the warranty:( Don't want.

IkarugaThe first thing I would have to do is to get rid of that fan thingy, which would void the warranty:( Don't want.

unplug it ? DUH Owait I am sure the monkeys at EVGA just put it there for looks ... makes sense
board has a bridge chip THEY run hot like 70c hot they need active cooling I do wish they had taken the trouble to run a set of
heat-pipes down to the fan tho

look at the board, dual 8 pins and one 6 pins

hungry power?

micropage7look at the board, dual 8 pins and one 6 pins
www.techpowerup.com/img/12-04-09/evga_z77_ftw_01.jpg
hungry power?

Look at bottom left hand corner, this board has 2*8 pin + 2*6 pin power connectors. :rockout:

ChaitanyaLook at bottom left hand corner, this board has 2*8 pin + 2*6 pin power connectors. :rockout:

yep, is that board will draw so much power so they put so many pins on that
just for oc-ing? :D

dint like it .. AsRock fatality or extreme 6 both are awesome and cheap

They need to make a 1155 that can run 4@x16 :p

A fan? Really? What is this, the '00s again?

Positive:
- Angled ATX-24pins connector is a major plus
- So are the dual ethernet connections
Negative:
- They could have sleeved the fan cable of the PCH cooling fan
- They could have colored the USB3 front connector black... red and blue do not go well together on the same motherboard (you hear me Sapphire?)

Amazing Board, but come on, the design is a bit awkward? this board is so beefed with stuff that might enable one of a kind OC for Ivy stuff, also it says a 4WAY SLI support? how come?
EVGA should work on the UEFI to be more like ASUS and MSI ones, this BIOS thing is dummy now.

DOMThey need to make a 1155 that can run 4@x16 :p

Or you can get a SB-E that has twice as many PCI-E lanes, Z77 is still mainstream.

AquinusOr you can get a SB-E that has twice as many PCI-E lanes, Z77 is still mainstream.

SB-E you just get 2c2t more not worth the money imo

especially if you want a unlocked multi they cost to much :eek:

DOMSB-E you just get 2c2t more not worth the money imo

especially if you want a unlocked multi they cost to much :eek:

I was unaware my 3820 was a 6-core... I'm running a healthy 4.75ghz. That isn't worth it?
1 multi bin + 125mhz strap and your cooking with gas.

I got it for 300 USD which costs less than the 2600k. You only pay a little more for the motherboard but if you want a quality build your not going to skimp on that anyways.

Intel Core i7-3820 Sandy Bridge-E 3.6GHz (3.8GHz T...

AquinusOr you can get a SB-E that has twice as many PCI-E lanes, Z77 is still mainstream.

I presume they're using a 3rd party PCI-E switch of some sort just to reach x8/x8/x8/x8?

i've seen boards with extra power connectors to feed more power to the pci-e lanes, but they've always been in the form of a 4-pin molex. 2x 6-pin pci-e power connectors? that's just ridiculous. by the time you've powered the board's pci-e slots, you don't have enough pci-e power cables to power the cards to populate said slots!
bad design by EVGA, most of us will have to upgrade our already beefy PSUs if we want to use this board.
on top of that, it's E-ATX, meaning the number of people who can use it gets even smaller.
Great job, EVGA.

Random Murdereri've seen boards with extra power connectors to feed more power to the pci-e lanes, but they've always been in the form of a 4-pin molex. 2x 6-pin pci-e power connectors? that's just ridiculous. by the time you've powered the board's pci-e slots, you don't have enough pci-e power cables to power the cards to populate said slots!
bad design by EVGA, most of us will have to upgrade our already beefy PSUs if we want to use this board.
on top of that, it's E-ATX, meaning the number of people who can use it gets even smaller.
Great job, EVGA.

I think it's safe to say that this product isn't aimed at you.

Remember also that you don't have to connect those PCI-E 6-pin power connectors - they're just to provide additional power if you want to use a lot of hungry graphics cards. Remember that any PCI-E 1.0 device can pull up to 75W through the socket itself (more for later PCI-E revisions), so if you fill 4 slots, that's 300W. Do you really want to pull all that extra current through the 24-pin connector?

micropage7yep, is that board will draw so much power so they put so many pins on that
just for oc-ing? :D

I really want to see OC potential of this board with a 3770k, there is too much power being delivered to the CPU as the pci-e power might be isolated from the board.

blibbaI think it's safe to say that this product isn't aimed at you.

how would you know? i am looking to build a new high-end pc, so what's to say i didn't come in here looking at a potential candidate for my new mobo? even now, i'm running three graphics cards.
i'm not trying to start a flamewar, so you don't have to direct comments at me.
try and be more tactful when talking to other members.

blibbaRemember also that you don't have to connect those PCI-E 6-pin power connectors - they're just to provide additional power if you want to use a lot of hungry graphics cards. Remember that any PCI-E 1.0 device can pull up to 75W through the socket itself (more for later PCI-E revisions), so if you fill 4 slots, that's 300W. Do you really want to pull all that extra current through the 24-pin connector?

i understand why you would put them there, and i have built high performance systems in the past that have required these.
what i'm trying to say is that TWO pci-e power connectors PLUS two 8-pin eps connectors is blatant overkill. they could have done just as well with a single 8- or 6-pin pci-e connector, since most if not all cards that support 4-way teaming have two dedicated power plugs already, and even the most power hungry card, when supplied with two pci-e power connectors on its board, will draw on average less than 45 watts from the motherboard.
again, overkill.

OneMoarunplug it ? DUH Owait I am sure the monkeys at EVGA just put it there for looks ... makes sense
board has a bridge chip THEY run hot like 70c hot they need active cooling I do wish they had taken the trouble to run a set of
heat-pipes down to the fan tho

I obviously understand that it needs adequate cooling ofc, but that thing there is still noting but a cheap and gimmicky solution. And, no you can't just unplug it, because there will be not enough airflow under that shield, so the only option is the get rid of it which (as I already said) will ruin your warranty.

Everybody who worked with mainboards knows that those little things are good for nothing but gathering dust and making noise (imho).

micropage7yep, is that board will draw so much power so they put so many pins on that
just for oc-ing? :D

The 6 pins are to support the PCIe section, the 8 pins are for the board/CPU.

by the time you've powered the board's pci-e slots, you don't have enough pci-e power cables to power the cards to populate said slots!

Yeah, if you have 3 cards, you likely have a PSU that could power them which would also have enough connectors to supplement.. OR you can simpl use the shed load of molex to PCIe connectors that likely came with your GPU's in the first place. ;)

Random Murdererhow would you know? i am looking to build a new high-end pc, so what's to say i didn't come in here looking at a potential candidate for my new mobo? even now, i'm running three graphics cards.
i'm not trying to start a flamewar, so you don't have to direct comments at me.
try and be more tactful when talking to other members.

That you would consider buying it does not imply that it is aimed at you. I felt that your criticisms were fairly specific to your own needs, as opposed to those of the intended market, which is why I directed the comment at you. It's like considering purchasing a Quadro just for gaming and complaining that it's uncompetitive vs. Geforce (extreme example).

Random Murdereri understand why you would put them there, and i have built high performance systems in the past that have required these.
what i'm trying to say is that TWO pci-e power connectors PLUS two 8-pin eps connectors is blatant overkill. they could have done just as well with a single 8- or 6-pin pci-e connector, since most if not all cards that support 4-way teaming have two dedicated power plugs already, and even the most power hungry card, when supplied with two pci-e power connectors on its board, will draw on average less than 45 watts from the motherboard.
again, overkill.

In that case, you can buy the board, and just connect one 8-pin and one 6-pin. Nobody's forcing you to connect them all. Extra features for sub-zero overclocking and the like aren't something that people generally complain about, so consider these features as in that category.

One 8 pin should be fine. In the X79 series, you only need one 8 pin up from 5Ghz+.

blibbaThat you would consider buying it does not imply that it is aimed at you. I felt that your criticisms were fairly specific to your own needs, as opposed to those of the intended market, which is why I directed the comment at you. It's like considering purchasing a Quadro just for gaming and complaining that it's uncompetitive vs. Geforce (extreme example).

lol, that analogy made my day.
Well put, and thank you for not taking offense to what i posted.
No offense was intended, it's just hard to express thoughts through text without sounding like an ass sometimes:toast:

blibbaIn that case, you can buy the board, and just connect one 8-pin and one 6-pin. Nobody's forcing you to connect them all. Extra features for sub-zero overclocking and the like aren't something that people generally complain about, so consider these features as in that category.

EarthDogOne 8 pin should be fine. In the X79 series, you only need one 8 pin up from 5Ghz+.

My point exactly. My complaint is not that you need to plug all of them in, just that they didn't need to be included in the first place to make this an excellent board. EVGA just went overboard and said "IT MUST HAVE TWO OF EVERYTHING!":roll: