Wednesday, April 18th 2012
![Intel](https://tpucdn.com/images/news/intel-v1739475473466.png)
Core i7-3770K Retail Boxes Pictured, TDP 95W, Overclocks Worse Than Sandy Bridge?
Here are the first pictures of retail boxes of Intel's Core i7-3770K "Ivy Bridge" processors in the LGA1155 package. Pictured below are boxes sourced from a Chinese distributor. Regional branding aside, the box-art hasn't changed from that of the 2nd Generation Core processor family, even the die-shot CGI in the center hasn't changed, which is a missed opportunity. Intel could have used art inspired by the Ivy Bridge silicon, which could have helped identify the new chips easier. The box simply marks the model number "3770K" and socket type "LGA1155" on the key sticker.
The side sticker is where the action is. We know from countless earlier reports, including Intel's RetailEdge marketing material that the TDP rating of "Ivy Bridge" quad-core parts, including the i7-3770K, was rated to be 77W. The sticker on retail i7-3770K, however, tells a different story. The TDP is rated at 95W, on par with previous-generation parts such as i7-2700K. The S-spec number is revealed to be "SR0PL". Before such an important CPU launch as "Ivy Bridge", it's hard to control pre-launch proliferation of retail parts to people who are not NDA signatories. Such people have put the i7-3770K through overclocking, and voices are getting louder that the i7-3770K is a worse overclocker than previous-generation "Sandy Bridge". The chip was found to get too hot, too soon, when overclocking.
Sources:
Semi Accurate (forums), NordicHardware
The side sticker is where the action is. We know from countless earlier reports, including Intel's RetailEdge marketing material that the TDP rating of "Ivy Bridge" quad-core parts, including the i7-3770K, was rated to be 77W. The sticker on retail i7-3770K, however, tells a different story. The TDP is rated at 95W, on par with previous-generation parts such as i7-2700K. The S-spec number is revealed to be "SR0PL". Before such an important CPU launch as "Ivy Bridge", it's hard to control pre-launch proliferation of retail parts to people who are not NDA signatories. Such people have put the i7-3770K through overclocking, and voices are getting louder that the i7-3770K is a worse overclocker than previous-generation "Sandy Bridge". The chip was found to get too hot, too soon, when overclocking.
80 Comments on Core i7-3770K Retail Boxes Pictured, TDP 95W, Overclocks Worse Than Sandy Bridge?
Nate saw 90c with the Intel water cooler
still 10-15c below max temp so its not bad its the same situation as Sandybridge you just need a good chip.
again as i mentioned in a different thread the IHS is shapped differently with IVB as well, so some coolers arent making good contact, aka
Sandybridge )
Ivybridge (
the IHS reversed direction a bit, most coolers = D to better fit older designs, with the switch to IVB coolers need to be redesigned a bit for better contact.
I also don't believe that, the heat sink should rest on the CPU and held in place by the bracket. The bracket is just for placement, not contact. It's the same socket too so much much can the surface area really chance?
Chips get hot ? yes
are they safe up to 105c? yes
are they faster clock for clock? yes
from what ppl are seeing it takes 300MHz give or take for Sandy to match Ivy on some benchmarks the spread is 500MHz
motherboards for IVY are cheaper, so it all depends on usage senario
but if the chip isnt dying who gives a shit lol, looks like 3770k clocks decently, not all will but at least review samples do,
that said ill be moving from a 2500k that can only do 4.4 to a 3770k which even if i max at 4.3 will still be faster so if your on a 2500k or lesser chip Ivy makes sense, 2600k or more if it clocks good it probably isnt worth it, but thats usually how it goes.
the IHS on the cpu itself is shaped differently with IVB
aka concave vs convex
essentially
Sandy Bridge is concave
Ivy Bridge is convex
current cpu coolers and water blocks tend to be convex so they fit snug with the concave IHS on the CPU,
essentially they look like this ))
right now the cooler contact with IVY = )(
aka not as much surface contact
is it a big issue no but something as simple as that can have an impact of around 5'c or more at these high temps
so with improved heatsink base designs say a revised A70 we know it hit 95c during testing at 4.8 a revised base could see temps drop to 90c instead it depends on the CPU as well but if using the same CPU something of that nature can and should happen,
I'll wait for a more decent perf increase at the same price. (next architecture)