Tuesday, July 23rd 2013
Dell Unveils UltraSharp 32 Monitor with Ultra HD Resolution
At SIGGRAPH, Dell unveiled its first UltraSharp monitor featuring Ultra HD (3840 x 2160 pixels) native resolution. The new UltraSharp 32 from Dell, as the name suggests, is a 32-incher. Based on an indium gallium zinc oxide (IGZO) panel, its color gamut spans across a gargantuan 1.07 billion colors, a 64 times increase over what conventional monitors offer, 16.7 million. The monitor will include software that lets you calibrate it including hardware access to the LUT (lookup table). Dell plans a commercial roll-out of the UltraSharp 32 in Q4-2013.
Source:
Engadget
32 Comments on Dell Unveils UltraSharp 32 Monitor with Ultra HD Resolution
All I was trying to say was that the 31.5" Asus PQ321 4K monitor is about ~$3800 USD and I expect the 32" Dell to be similarly priced (guessing they use similar tech).
I wasn't trying to draw a comparison between the cheaper Seiki UHDTVs because they are clearly in a different quality category and use different tech.
It's really a shame that Seiki insists on limiting their 4K TVs to HDMI @ 30 Hz. They could probably double sales if they added a MST DisplayPort input (even if that meant hiking the price by ~$100). The truth is that 4K isn't really that important for direct-view TV sets, but it can make a real difference in computer monitors.
The pending 39" ASUS 4K monitor has the potential to be really great. The size means that someone who wants a large workspace could probably get away with leaving DPI scaling at 100% (avoiding compatibility issues), since it will only have about 110 DPI. And the VA panel will hopefully bring prices down compared to the Sharp IGZO panel that they charge an arm and a leg for.
Seiki is releasing 4K UHDTV models not 4K PC monitors so I don't think they are doing anything wrong or out of step. The problem comes in when an enthusiast wants to use such an UHDTV in a way it wasn't necessarily intended to be used and hits that 30Hz limit at 3840x2160.
Personally I think I can live with a Seiki 4K UHDTV as a PC monitor at 30Hz for some types of desktop work but probably not for gaming. So I guess I could lower the resolution to 1920x1080 at 120Hz for that. However, I have heard that the Seiki UHDTV models will do 2560x1440 at ~88Hz or so. Not sure how the weak scaler would do at those settings though and the image quality might (likely) leave something to be desired.
I probably would have bought a Seiki already but I have noticed that conventional HDTV models have dropped in price. For the same ~$700 USD the 39" model goes for I've come across 50" smartTV name brand models with 3D support and 6 free pair of 3D glasses.
BTW, some Media Center software will spit out an error message when something greater then 1920x1080 is detected.
This on the other hand I'm fairly sure it's gonna be awesome.
Dell swapped my pixel defective U3011 in 1 day with a new one without questions.
Let's hope it doesn't cost more than 2-2.5k :)