Tuesday, October 23rd 2018
In Win Intros Classic Basic Series High-Wattage PSUs
In Win today introduced the modestly named Classic Basic (CB) series high-Wattage PSUs. These are high-end PSUs with premium specifications, whose naming probably reflects the classic product design. Available in 1050W and 1200W models, the CB series PSUs offer fully modular flat cabling, DC-to-DC switching for the +3.3V and +5V rails, and a single +12V rail design, boasting of 80 Plus Platinum efficiency. The 135 mm temperature-activated fan stays off when either the PSU's load is under 25%, or an internal thermal diode reads under 55°C. It only starts spinning beyond, with a gradual curve. The fan spins for 60 seconds following system shutdown.
Under the hood, the CB-series features a Digital Voltage Feedback design that minimizes output voltage fluctuation to under ±2%; an active PFC, and electrical protections against over/under-voltage, overload, overheat, and short-circuit. Both models offer two 8-pin EPS connectors besides the 24-pin ATX. The 1200W model offers eight 6+2 pin PCIe power connectors, while the 1050W model offers six. Both models offer 16 SATA power, and a number of other legacy power connectors. Both models are backed by 7-year warranties.
Under the hood, the CB-series features a Digital Voltage Feedback design that minimizes output voltage fluctuation to under ±2%; an active PFC, and electrical protections against over/under-voltage, overload, overheat, and short-circuit. Both models offer two 8-pin EPS connectors besides the 24-pin ATX. The 1200W model offers eight 6+2 pin PCIe power connectors, while the 1050W model offers six. Both models offer 16 SATA power, and a number of other legacy power connectors. Both models are backed by 7-year warranties.
2 Comments on In Win Intros Classic Basic Series High-Wattage PSUs