HyperSLI (Enabling SLI on non-sli motherboards)

[jbailey8]

Glad everything installed ok, Have fun!

 

[zippitysplat]

hello jbailey8 i was hopping you could reupload the hacked drivers for nvidia 341.92 for windows 7 64 bit as well as the instructions i did find the older post where you had uploaded this information but it was so old the files had been pulled.

 

[jbailey8]

Here's the re-uploaded link for 341.92 windows 7:


http://www.gamefront.com/files/25415954/nvlddmkm-34192-vista-7-8-64bit.rar

Here's the installation instructions for differentsliauto:

1. Go to http://www.geforce.com/drivers and download the latest drivers (341.92) for your version of windows.
2. Go here: http://www.gamefront.com/files/25415954/nvlddmkm-34192-vista-7-8-64bit.rar
3. Go here: https://github.com/EmberVulpix/DifferentSLIAuto/releases and download the 1.3 version of this package.
4. If you don't already have winrar installed, go here: http://www.rarlabs.com/download.htm and download the version of winrar for your system that is current and run the installer.
5. Unpack differentsliauto 1.3 to a folder of your choice (c:\diffsli13 for example).
6. Unpack the patched driver into the same folder you unpacked differentsliauto 1.3.
7. Run the official video driver installer you downloaded from nvidias' site and let it install the official drivers.
8. Once the official drivers are installed and the installer has finished, go back to where you unpacked differentsliauto 1.3 and you also have the patched nvlddmkm.sys.
9. Open a administrator level command prompt (hold down left-shift & right-click anywhere in the window (don't have any files high-lighted) and select 'open command window here'.
10. Run the 'Install.cmd' file, it should say 'success!' in green text at the bottom of the window if there were no errors.
11. Reboot your computer.
12. Go to your nvidia control panel and activate sli.

 

[jbailey8]

Your welcome! Hope everything works ok!

 

[Christophe]

Here's the re-uploaded link for 341.92 windows 7:


http://www.gamefront.com/files/25415954/nvlddmkm-34192-vista-7-8-64bit.rar

Here's the installation instructions for differentsliauto:

1. Go to http://www.geforce.com/drivers and download the latest drivers (341.92) for your version of windows.
2. Go here: http://www.gamefront.com/files/25415954/nvlddmkm-34192-vista-7-8-64bit.rar
3. Go here: https://github.com/EmberVulpix/DifferentSLIAuto/releases and download the 1.3 version of this package.
4. If you don't already have winrar installed, go here: http://www.rarlabs.com/download.htm and download the version of winrar for your system that is current and run the installer.
5. Unpack differentsliauto 1.3 to a folder of your choice (c:\diffsli13 for example).
6. Unpack the patched driver into the same folder you unpacked differentsliauto 1.3.
7. Run the official video driver installer you downloaded from nvidias' site and let it install the official drivers.
8. Once the official drivers are installed and the installer has finished, go back to where you unpacked differentsliauto 1.3 and you also have the patched nvlddmkm.sys.
9. Open a administrator level command prompt (hold down left-shift & right-click anywhere in the window (don't have any files high-lighted) and select 'open command window here'.
10. Run the 'Install.cmd' file, it should say 'success!' in green text at the bottom of the window if there were no errors.
11. Reboot your computer.
12. Go to your nvidia control panel and activate sli.

Hi jbailey8,

I have not good understand the points 9 and 10. How I must to do to open command prompt window as administrator level.
Can you me show some pictures that I good understand ? That is very kind of you.
Best regards.
Chris

 

[jbailey8]

To Christophe:

Video link:

 

[Christophe]

Thank you very much for the video, jbailey8.

I wish you a good night.

 

[jbailey8]

Hope the video helped!

 

[Joe Sizzle]

Here's the latest download links for 361.43:

http://www.gamefront.com/files/25401790/nvlddmkm36143w

http://turbobit.net/vnk4la6a9hfz.html
-----------------------------------------------


http://www.gamefront.com/files/25401726/nvlddmkm36143-vista-win7-8-81-64bit.rar

http://turbobit.net/zg9nsue3y9ul.html

------------------------------------

Here's the installation instructions for differentsliauto:

1. Go to http://www.geforce.com/drivers and download the latest drivers (361.43) for your version of windows.
2. Go here: http://www.gamefront.com/files/25401726/nvlddmkm36143-vista-win7-8-81-64bit.rar
(This link assumes windows 7, 8, or 8.1 and this is 64 bit only, if you need the windows 10 version, see download links above).
3. Go here: https://github.com/EmberVulpix/DifferentSLIAuto/releases and download the 1.3 version of this package.
4. If you don't already have winrar installed, go here: http://www.rarlabs.com/download.htm and download the version of winrar for your system that is current and run the installer.
5. Unpack differentsliauto 1.3 to a folder of your choice (c:\diffsli13 for example).
6. Unpack the patched driver into the same folder you unpacked differentsliauto 1.3.
7. Run the official video driver installer you downloaded from nvidias' site and let it install the official drivers.
8. Once the official drivers are installed and the installer has finished, go back to where you unpacked differentsliauto 1.3 and you also have the patched nvlddmkm.sys.
9. Open a administrator level command prompt (hold down left-shift & right-click anywhere in the window (don't have any files high-lighted) and select 'open command window here'.
10. Run the 'Install.cmd' file, it should say 'success!' in green text at the bottom of the window if there were no errors.
11. Reboot your computer.
12. Go to your nvidia control panel and activate sli.

If after following these instructions you still can't get sli mode running, check the dev numbers on your video boards, if they don't match, you'll need to download this utility:


http://www.softpedia.com/progDownload/NVIDIA-BIOS-Editor-Download-4977.html

I am a noob when it comes to this. I already have differentsliauto working and I only need to update the driver. Do I just download the first link or do I need to do that 12 step program? I assumed that was for the program itself. I never updated a driver this way so I am confused. Thanks in advance!

 

[jbailey8]

To Joe Sizzle:

Just download the updated driver and run the install.cmd and reboot, go to the nvidia control panel and activate sli mode.
The safest thing to do is follow all of the steps again. Note that you probably won't have to re-download differentsli auto.

 

[Joe Sizzle]

To Joe Sizzle:

Just download the updated driver and run the install.cmd and reboot, go to the nvidia control panel and activate sli mode.
The safest thing to do is follow all of the steps again. Note that you probably won't have to re-download differentsli auto.

When I try to extract the driver it says the file is corrupt then the folder is empty

 

[jbailey8]

If your using chrome, it might try to block the download due to some bad files being found on gamefront, try the alternate download link:


http://turbobit.net/vnk4la6a9hfz.html

and another link:

http://dl.free.fr/pghbDMTTa

 

[Joe Sizzle]

If your using chrome, it might try to block the download due to some bad files being found on gamefront, try the alternate download link:


http://turbobit.net/vnk4la6a9hfz.html

and another link:

http://dl.free.fr/pghbDMTTa

does that link work for windows 7? The first link you posted extracted fine but there is only a system file in it and I cannot do anything with it.

 

[jbailey8]

Don't you already have everything else? If so, all you need is the updated system file.

 

[Joe Sizzle]

Don't you already have everything else? If so, all you need is the updated system file.

So just move and replace the system file and that's it?

 

[jbailey8]

Yes, unpack the updated nvlddmkm.sys file to where you already have differentsliauto installed, overwriting the old one, and run the Install.cmd, reboot, then go to your nvidia control panel and
activate sli mode.

 

[Joe Sizzle]

Yes, unpack the updated nvlddmkm.sys file to where you already have differentsliauto installed, overwriting the old one, and run the Install.cmd, reboot, then go to your nvidia control panel and
activate sli mode.

Thank you so much. Sorry for all the questions.

 

[Joe Sizzle]

Ignore this post. I fiddled around with it and got it to work. Thank you very much for all of your help.

 

[jbailey8]

Glad everything is working!

 

[LINKMANXD]

Hello jbailey8, I would like to answer a question. I have a "gtx 660" and "gtx660 oc" I want them working on "SLI" mode, the problem is that I discovered that my motherboard "gigabyte Z77-d3h" does not support this mode.
let me know I need to make them work. It is my first time trying to do something like this and I'm really lost. I beg you please help me with your experience in the field.

sorry for my english, try to explain it as best I could.

 

[jbailey8]

To Linkmanxd:

You didn't specify your operating system, but here's the installation instructions:

Follow these instructions:

Here's the installation instructions for differentsliauto:

1. Go to http://www.geforce.com/drivers and download the latest drivers (361.43) for your version of windows.
2. Go here: http://www.gamefront.com/files/25401790/nvlddmkm36143w or http://dl.free.fr/pghbDMTTa If you need the windows 7 version let me know.
3. Go here: https://github.com/EmberVulpix/DifferentSLIAuto/releases and download the 1.3 version of this package.
4. If you don't already have winrar installed, go here: http://www.rarlabs.com/download.htm and download the version of winrar for your system that is current and run the installer.
5. Unpack differentsliauto 1.3 to a folder of your choice (c:\diffsli13 for example).
6. Unpack the patched driver into the same folder you unpacked differentsliauto 1.3.
7. Run the official video driver installer you downloaded from nvidias' site and let it install the official drivers.
8. Once the official drivers are installed and the installer has finished, go back to where you unpacked differentsliauto 1.3 and you also have the patched nvlddmkm.sys.
9. Open a administrator level command prompt (hold down left-shift & right-click anywhere in the window (don't have any files high-lighted) and select 'open command window here'.
10. Run the 'Install.cmd' file, it should say 'success!' in green text at the bottom of the window if there were no errors.
11. Reboot your computer.
12. Go to your nvidia control panel and activate sli.

 

[LINKMANXD]

thanks for responding so fast, excuse me my operating system is windows 7, your instructions for this system work?
thanks again, you saved me.

 

[maxie rakers]

hello jbailey.. a newbie here.. i just wanna ask how to sli 2 gtx 970 on a cf only mobo?? i got windows 10 os.. thanks in advance!

 

[jbailey8]

To maxie rakers:

Follow these instructions:

Here's the installation instructions for differentsliauto:

1. Go to http://www.geforce.com/drivers and download the latest drivers (361.43) for your version of windows.
2. Go here: http://www.gamefront.com/files/25401790/nvlddmkm36143w or http://dl.free.fr/pghbDMTTa
3. Go here: https://github.com/EmberVulpix/DifferentSLIAuto/releases and download the 1.3 version of this package.
4. If you don't already have winrar installed, go here: http://www.rarlabs.com/download.htm and download the version of winrar for your system that is current and run the installer.
5. Unpack differentsliauto 1.3 to a folder of your choice (c:\diffsli13 for example).
6. Unpack the patched driver into the same folder you unpacked differentsliauto 1.3.
7. Run the official video driver installer you downloaded from nvidias' site and let it install the official drivers.
8. Once the official drivers are installed and the installer has finished, go back to where you unpacked differentsliauto 1.3 and you also have the patched nvlddmkm.sys.
9. Open a administrator level command prompt (hold down left-shift & right-click anywhere in the window (don't have any files high-lighted) and select 'open command window here'.
10. Run the 'Install.cmd' file, it should say 'success!' in green text at the bottom of the window if there were no errors.
11. Reboot your computer.
12. Go to your nvidia control panel and activate sli.

 

[jbailey8]

To linkmanxd:

Glad everything is working now!