Thermaltake, the leading PC DIY premium brand for Case, Cooling, Gaming peripherals, and enthusiast memory solutions, expands both all-in-one liquid coolers and air coolers by introducing new-colored products: TOUGHLIQUID 240 ARGB Sync Turquoise/ Racing Green All-In-One Liquid Cooler and TOUGHAIR 510 Turquoise /Racing Green CPU Cooler.

Adding more colorful models to the AIO liquid cooler series, the TOUGHLIQUID 240 ARGB Sync Turquoise/Racing Green All-In-One Liquid Cooler is a TOUGHFAN 12 equipped all-in-one liquid cooler with a built-in controller and rotational cap with 6 LEDs, which can be controlled by 5V RGB compatible motherboards. Notably, the TOUGHFAN 12 is a superior fan with speeds of up to 2000RPM and only 22.3dba of noise signature, offering excellent silent cooling performance. The TOUGHLIQUID 240 ARGB Sync Turquoise/Racing Green All-In-One Liquid Cooler is the best selection for users who are looking for a functional and good-looking All-In-One Liquid Cooler.

With the new 402 cooler from the Performance C series Xilence presents a compact, yet very powerful cooler for powerful multi-core processors. The small and very silent cooler comes in the classical tower design, and convinces with extremely powerful heatpipes and its innovative rib design. That ensures a low speed of the 92mm fan and therefore a very low noise level. The heat transfer between CPU and cooler is due to the direct contact of heatpipes to the CPU extremely efficient and very smooth. The A402 and the I402 will be available from May for 14,90 Euro (MSRP).

Japanese cooling expert Scythe announces a new revision of its Kodati CPU Cooler. Scythe is one of the first manufacturers to announce a special solution to the market for the socket AM1 (FS1b). Users have finally the chance to exchange the stock AM1 CPU cooler against the much more powerful Kodati Rev. B. The new revision furthermore inherits the socket support to the common sockets from AMD and Intel, which is very typical for Scythe products.

Scythe Kodati CPU Cooler aims specifically at the HTPC and Mini-ITX market, where size and weight is crucial. Thanks to its total heights of mere 34 millimeters and weight of 180 grams, Kodati Rev. B CPU cooler is able to fit to basically every compact system. This has been achieved by implementing the Stealth Fan Mounting Structure (S.F.M.S), where the pre-installed fan is located between the aluminum fin-structure and copper-baseplate. Fast heat dissipation is assured thanks to the two copper-heatpipes with 6 mm thickness. Users are able to control the supplied 80 mm fan in the range between 800 and 3.300 RPM thanks to the PWM support. The airflow varies between 10,2 and 42,2 m3/h (6,0~24,82 CFM), depending on the fan speed. The specified noise level during operation starts at inaudible 8,2 dBA and goes up to merely audible 32.5 dBA.

DeepCool has just added a new CPU cooler to its product portfolio, a model known as IceEdge 400 E (Elite Edition) that supports Intel LGA1156/LGA1155/LGA1150/LGA775 and AMD FM2/FM1/AM3+/AM3/AM2+/AM2/940/939/754 processors with a TDP of up to 130 W.

Pictured below, DeepCool's creation measures 100 x 86 x 125.5 mm, it weighs 475 grams and features an aluminum heatsink, four direct touch copper heatpipes, and a 92 mm Hydro Bearing fan that operates at 2200 RPM and has a sound output of 26.3 dBA. The IceEdge 400 E's price tag was not announced.

After the successful launch of the ETS-T40 series, Enermax now presents a new line of CPU Coolers in the series, the ETS-T40-Black Twister (ETS-T40-BK) and ETS-T40-White Cluster (ETS-T40-W). The new lineup not only inherits the superior performance of the ETS-T40 series with patented technologies, but also features an attractive heat sink decked out in a stunning coat, increasing the options and appeal of the ETS-T40 series family.

Black Twister and White Cluster are available in midnight black and arctic white colors, respectively. Both models employ a unique TCC (Thermal Conductive Coating) to create better velocity of thermal transference and prevent oxidation on the contact surface. ETS-T40-Black Twister features a circular blue LED PWM fan for a mesmerizing presentation. On the other hand, ETS-T40-White Cluster is equipped with the white LED fan with the unique PWM APS (Adjustable Peak Speed) control which offers 3 peak RPM options to satisfy the needs of consumers who prefer manual adjustability.

Thermal Solutions specialist GELID Solutions reveals the Rev. 2 GX-7 CPU cooler of its GAMER product line. Engineers at GELID Solutions have upgraded the award-winning GX-7 to the Rev. 2 GX-7 by adding the Slim 12 PL Blue fan and the multi award-winning GC-Extreme thermal compound. Contrary to traditional heat pipe arrangement the Rev. 2 GX-7 offers a special array of heat pipes to take full advantage of all 7 heat pipes heat transfer capacity. Further V-shaped aluminum fins were used in the center of the heat sink to allow airflow to reach the heat sink more evenly. Openings inside of the heat sink and near the heat pipes let fresh-air flow in from the top and the bottom to the zones where normally poorly ventilated and eliminate the creation of hotspots. The unique heat sink shape supports dual fans.

Evercool announced the HPR 9225EA entry-level tower-type CPU cooler. It uses a stack of 43 aluminium fins, to which heat is conveyed by two 6 mm-thick copper heat pipes, which make direct contact with the CPU at the base. The stack is ventilated by a 92 mm fan that spins at speeds up to 2,200 RPM, pushing 35.6 CFM of air, with 26.3 dBA noise output. Measuring 97 x 73 x 118 mm (WxDxH), the cooler weighs about 400 g. It supports most modern CPU socket types, with the exception of LGA2011. Among the socket types supported are LGA115x, LGA775, AM3+/AM3/AM2+, and FM2/FM1. The company did not give out pricing information.

It's not retirement time for AMD's 45 nm "Regor" silicon just yet, with the company announcing the Athlon II X2 280 value dual-core processor. Built in the socket AM3 package (compatible with AM2/AM2+/AM3/AM3+ motherboards), and based on the company's K10.5 micro-architecture, the chip features two x86-64 cores clocked at 3.60 GHz, 1 MB of L2 cache per core (2 MB total), an instruction set that includes SSE3 and SSE4A, and a dual-channel integrated memory controller that supports both DDR2 and DDR3 memory types. The chip can take advantage of HyperTransport 3.0 interface, with a maximum data-rate of 4.0 GT/s. It features a rated TDP of 65W, and is designed for entry-level desktops. It is priced at US $49.99.

Phanteks launches PH-TC12DX, a U-Type dual tower heat-sink with four 6mm heat-pipes allows for optimal airflow and cooling. PH-TC12DX's 6mm heat-pipes are linearly aligned and developed to have the least amount of air and thermal resistance. Incorporating P.A.T.S and C.P.S.C Technologies, PH-TC12DX delivers better heat dissipation and heat transfers. PH-TC12DX includes dual PH-F120HP PWM Premium fans to allow for higher performance and/or silent operation.

Scythe released the Apsalus entry-level liquid CPU Cooler (model: APSALUS3-120). Based on an Asetek platform, the pre-assembled (maintenance-free), closed-loop cooler uses an exposed copper base with pump assembly, joined the the 1U 120 mm radiator that packs the reservoir, which is ventilated by a 120 mm Scythe-made fan. The base measures 72.3 x 72.3 × 27.3 mm, the radiator 120 x 150 x 27 mm (excluding the fan), and the coolant pipes are about 326 mm long. The cooler supports all modern CPU socket types, including LGA2011, LGA115x, LGA1366, FM2/FM1, and AM3+/AM3/AM2+/AM2. It is priced around 6,980¥ ($84).

Antec introduced V4 series design updates for its Kuhler H2O 620 and H2O 920 closed-loop CPU coolers. The new coolers are outfitted with a higher-pressure pump, and split-flow copper fin design in the radiators. The company claims the two innovations work to drop temperatures down a further 2-4°C, over temperatures previous versions achieve. Lastly, the coolers are labeled with guaranteed support for current and upcoming CPU socket types, including LGA2011, LGA115x, LGA775, FM2/FM1, and AM3+/AM3/AM2+. Prices remain unchanged.

Cooler Master's new line of liquid CPU coolers include the Seidon 120M. The self contained (closed-loop) cooler combines a 150.3 x 118 x 27 mm aluminum fin radiator with a copper micro-channel block. The radiator and block+pump unit are factory fitted with flexible tubes. The radiator makes use of a 120 mm 600~2400 RPM PWM-controlled fan with 19~40 dBA noise output. The pump, on the other hand, can be as loud as 17 dBA. The cooler will include retention modules for all popular CPU socket types, including AMD AM3+/AM3/AM2+/AM2, FM2/FM1, Intel LGA1155/1156, LGA2011, LGA1366, and LGA775. Pricing and availability information is not available.

EK-Supremacy Elite, the premium bundle containing the best CPU water block on the market and the best thermal interface on the market - the EK-TIM Indigo Xtreme - is now finally shipping. Please note that due to high demand this product may be shown as out of stock at the time of purchase. These water blocks are therefore manufactured on daily basis to ensure adequate supply and daily re-stock.

EK-Supremacy Elite is the premium bundle containing the best CPU water block on the market - the EK-Supremacy - Full Nickel - and the best thermal interface on the market - the EK-TIM Indigo Xtreme. EK-Supremacy is a universal CPU water block that fits all modern CPU sockets with a universal mounting mechanism that offers error-preventing, tool-less installation. The result is a perfect installation which results in perfect performance every time. EK-Supremacy is truly the best product for performance seeking enthusiasts.

Thermal Solutions specialist GELID Solutions has upgraded its multi-winning "Slim Silence AM2" to "Slim Silence A-Plus" which is compatible to all updated socket of AMD.

With a compact heatsink design for Mini ITX, Micro ATX, ATX, HTPC, Panel PC, Car PC and 1U server the "Slim Silence A-Plus" contains two power heatpipes and a silent fan with PWM function. The high performance heatpipes ensure a fast and efficient heat transfer from core to aluminum fins. The frameless silent fan includes a ball bearing and a GELID intelligent PWM (Pulse Width Modulation) control which ensures a silent operation at low CPU temperature and accelerates the fan speed when necessary.

After a brief sighting at Computex 2012, we come across the Aeolus Big Frost dual-tower CPU cooler again. This time, the cooler appears polished and ready for market launch. The cooler is a simplified version of DeepCool's Assassin, retaining its dual aluminum fin tower design. The design consists of two symmetric aluminum fin stacks, through which six 6 mm-thick copper heat pipes pass, drawing heat from a copper CPU base. The fin-stack is then ventilated by two 120 mm fans in push-pull configuration.

The heatsink measures 126 x 136 x 159 mm, weighing 1,109 g (including fans). The fan pushing "fresh" air through the first fin stack is configured to spin at speeds of up to 1,300 RPM, with noise levels as high as 22.6 dBA, while the fan pulling air and conveying it to the second fin stack spins at speeds ranging in 900-1,500 RPM, with 21.4 to 32.1 dBA noise levels. The Big Frost supports a full range of CPU socket types available in the market today, including Intel LGA2011, LGA1155/LGA1156, LGA1366, LGA775, AMD AM3+/AM3/AM2+/AM2, and FM2/FM1. In China, the cooler is expected to sell for 200 RMB (US $32).

Prolimatech, the master of cooling is going a step further after the success of the Prolimatech Megahalems by presenting another revolution in CPU cooling with the limited edition Prolimatech Black Series Genesis. Besides the immaculate quality - which is present across their entire product line-up - the Black Genesis sets new standards in cooling capability and cool looks.

Prolimatech continues the trend set by the Megahalems and Super Mega by utilising two separate towers, but instead of placing them next to each other, they have been rearranged for maximum performance. The large array of cooling fins can hold up to three 120 or 140 mm fans, two of which can be installed right out of the box with the included mounting materials. Besides keeping the CPU cool, the construction allows for direct air flow across critical areas like the memory and power phases of the system.

GELID Solutions showed off its newest Gamer series Black Edition CPU Cooler (doesn't carry a GX## model number). The cooler's design consists of a dark aluminum fin dual-tower design à la NH-D14, Corator DS, etc., and uses no less than seven heat pipes (3x 8 mm-thick and 4x 6 mm-thick) to transport heat from the base to the aluminum fin stacks. In the space between the two fin-stacks, a standard-size 120 mm (25 mm-thick) fan pulls air through the first stack, and pushes it through the second one. Pushing in fresh-air through the first stack is care of a slim 120 mm (15 mm-thick) fan. The cooler will be designed to be compatible with all modern CPU socket types, including LGA2011, LGA1155/LGA1156, LGA1366, AM3+/AM3/AM2+/AM2, and FM2/FM1.

Cooling specialist Alpenföhn presents their newest addition to the Matterhorn line of performance coolers. Dubbed the Matterhorn Pure, it focuses on delivering the best possible cooling at the best possible price. Even with its untreated surface, the Matterhorn Pure impresses with the same high quality which Alpenföhn is known for.

Weighing in at a solid 660 grams without a fan, the cooler manages to impress with plenty of heat dissipation area. But Alpenföhn has ensured, that the material used has been employed properly utilizing the same design as the Matterhorn cooler, but leaving out the Nickel plating to allow the cooler to be offered at the best price point possible. The Pure still offers six heatpipes which make direct contact with the heat spreader of the CPU and thus manages to impress with great performance as well.

First unveiled this January, Reeven's extreme-cooling pot (model: RECC-01) launched in various markets. In Japan, it is being marketed by Scythe. Measuring 70 x 70 x 160 mm (WxDxH), and weighing 900 g, the RECC-01 is a liquid nitrogen or dry-ice evaporator. Aluminum makes up most of its body, while nickel-plated copper makes up its base. Its base dissipation surface has 18 circular pits. An AEROFLEX polymer insulation sleeve is included. Also included are a retention module supporting Intel sockets LGA2011, LGA1155/LGA1156, LGA1366 and LGA775; and AMD sockets FM1/AM3+/AM3/AM2+/AM2; and a thermal probe port. It is priced at 19,980 JPY (US $242).

Japanese cooling expert Scythe announcing a new revision of the Top-Flow CPU cooler Grand Kama Cross. New Rev. B of the x-shaped cooler comes with reliable quality and performance for the same price as prior version. Main improvement is the compatibility to the new enthusiast socket LGA2011 from Intel. Furthermore Socket compatibility list includes latest Intel socket LGA1155, LGA1156, LGA775, LGA1366 as well as AMD socket 754, 939, 940, AM2, AM2+, AM3, AM3+ and FM1.

Well-proven Top-Flow design of grand Kama Cross Rev. B utilizes the created airflow to additionally cool surrounding components on the motherboard. Curved aluminum fin structure deflects the airflow, which has a positive influence on temperatures of Voltage regulator modules, chipset and RAM. Efficient airflow is achieved by the pre-assembled 140 mm axial fan. Scythe Slip Stream 140 PWM fan comes with PWN support and allows stepless fan speed adjustments from 500 to 1.300 RPM.

Titan Technology unveiled its latest Siberia CPU Cooler, the TTC-NC55TZ(RB). The cooler has an asymmetric aluminum fin tower design, which cools other hot components on the motherboard along with the CPU. The design consists of a nickel-plated copper base, from which five copper heat pipes pass. One end of these heat pipes pass through an aluminum fin stack that propagates along the plane of the motherboard, while the other passes though a stack that propagates perpendicular to this plane.

The stack that's along the plane of the motherboard is the larger of the two, and is ventilated by a 140 mm fan. The perpendicular stack is ventilated by a smaller 120 mm fan. The 140 mm fan spins at 700 ~ 1,800 RPM, pushing 34.78 ~ 89.43 CFM of air, with a noise output of 8.3 ~ 28.8 dBA. The 120 mm fan, on the other hand, spins at 800 ~ 2,200 RPM; pushing 24.23 ~ 66.2 CFM, with 15.0 ~ 35.0 dBA noise output. Both fans have 4-pin plugs and support PWM control. The heatsink itself measures 200 x 130 x 162 mm (WxDxH), weighing 755 g. All current sockets, including LGA2011, LGA1366, LGA1155/LGA1156, AM3+/AM3/AM2+/AM2, and FM1 are supported. It is priced at 6,980 JPY (US $91.6).

Arctic showed of two nearly-identical CPU coolers, the Freezer i30 and Freezer A30. The two are identical till the point where the i30 is designed for Intel sockets only (LGA2011, LGA1155/1156), while the A30, for AMD sockets only (AM3+/AM3/AM2+/AM2). The two share a tower-type aluminum fin-stack heatsink design, capable of handling thermal loads of up to 320W.

The heatsink uses four 8 mm thick exposed-copper heat pipes that make direct contact with the CPU at the base, and pass through the heatsink, which is then ventilated by a 120 mm PWM-controlled fan with a fancy-looking frame. Rubber standoffs attach the fan to the heatsink dampening vibrations. The retention clips come attached to the heatsink out of the box. A 0.5g syringe of Arctic MX-4 compound is included, while the coolers' base don't come with the compound pre-applied.

The colored coolers from Zero Infinity are now available for pre-order at Caseking.de. The violet fan blades and accents define the look and feel of these new cooling units. The top model by the name "Free Flow+" impresses with three fans in combination with direct touch heatpipes and dual tower design, allowing it to cool even the hottest and fastest processors with ease.

Based in Hong Kong, the new brand aims to turn the heads of the enthusiast crowd. The name: Zero Infinity. "Zero" and "Infinity" present two opposite aspects for many mathematician, physicists and philosophers , while still distinctively connected to each other.

After extensive development work our newest product is on the market available. The Coollaboratory ALPHEOS Liquid Cooler offers by its perfectly co-ordinated aquifer system a brilliant cooling efficiency.

By the multiplicity of the superfine lamellas, which have a small distance too each other, results an extreme flow rate which dissolves the warm-restraining boundary layers. Thereupon the Coollaboratory ALPHEOS Liquid Cooler catapults itself into the best regions of all available water cooler at the market in the matter of cooling performance. It was provided on basis of computational fluid dynamics, therefore all death water zones were eliminated, which additionally affects the cooling performance positively.

Zalman took its first dip into water cooling after a while, with the CNPS20LQ, a self-contained (closed loop) CPU cooler. Designed and made originally by Asetek, a well-established brand name in OEM water cooling solutions, the CNPS20LQ uses a single-fan (dual-fan capable) radiator design. Its radiator measures 120 (W) x 158 (L) x 25 (H) mm. The radiator houses a small reservoir. The block houses a pump, which draws power from standard 4-pin CPU power header, and supports PWM control. The two are connected by flexible tubing. The block features a copper base with pre-applied thermal interface material. The CNPS20LQ supports all current socket types, including Intel LGA2011, LGA1155/1156, LGA1366, LGA775; AMD AM3+, FM1, and AM3/AM2+/AM2. It is priced at €69.90.