EK, the premium liquid cooling gear manufacturer from Slovenia, EU, is releasing new Quantum Line VTX pump-based combo units. These new VTX pumps feature a DDC-compatible mount, very high head pressure, and good flow rates in a small footprint that is ideal for smaller cases. EK-Quantum products come with sophisticated addressable D-RGB 5 V LEDs that can be controlled through your motherboard's RGB control software or EK-Connect controller unit. Besides the upgraded loop routing capabilities of the new small form factor combo units, EK is putting a lot of emphasis on the D-RGB implementation with no visible LED hot-spots.

The most popular small form factor cylindrical pump-res combo on the market is redesigned, upgraded, and better in every way. The top is now featuring three G1/4" ports. One of the ports can be used with the included nickel-plated brass internal tube, which helps prevent the splashing of the coolant inside the reservoir if the top is to be used as an inlet. This reduces the chances of air being sucked in by the pump and foaming of the coolant as well. Any of these ports can also be used for filling the system or adding additional upcoming accessories (thermal probes, LEDs, etc.) The internal tube can not be used in conjunction with the anti-Vortex insert on 120 models due to height restrictions.

EK Water Blocks, the premium liquid cooling gear manufacturer, is launching six-piece multipacks of the entire Torque series fittings due to their increasing popularity and demand as these are the only fittings on the market that feature replaceable aesthetic color rings. These six-pack fittings come in three different finishes - Nickel, Satin Black, and Black Nickel.

EK-Quantum Torque 6-Pack STC (Soft Tube Compression) fitting multipack is a soft-tube compression fitting pack designed for use with flexible soft tubing such as PVC, EPDM, Norprene, silicone, or any other type of compatible flexible tube. EK-Quantum Torque Fittings have a non-intrusive, yet striking look, and with NO added branding at all, they can be complemented by the interchangeable aesthetic color rings, which are purchased separately. These fittings are an ideal choice for anyone who wants to easily refresh the look of their liquid-cooled PC and are a perfect match for the EK-Quantum series products. These are secure variants of the tubing fitting connector as the locking ring prevents a flexible tube from being pulled out of the fitting by compressing the tubing wall underneath the ring. Such fitting does not require any hose clamp or a similar substitute.

EK Water Blocks, the premium water cooling gear manufacturer based in EU, is releasing the sleek matte black PreciseMount sets compatible with all EK-Quantum Velocity CPU water blocks (Magnitude and Velocity sTR4 blocks NOT supported). This mounting set has all the necessary parts to mount an EK-Quantum Velocity on all currently supported mainstream Intel, AMD, and Intel HEDT sockets. It offers fast and easy installation with the perfect amount of pressure, resulting in outstanding performance.

PreciseMount comes with every EK-Quantum Velocity CPU water block but is now separately available for purchase in case you've misplaced some of your mounting parts. It comes in two finishes - nickel and black - to better match your build.

EK, the premium water cooling gear manufacturer, is launching the EK-Quantum Reflection Obsidian 1000D D5 PWM D-RGB, a reservoir, routing, and pump solution specifically engineered for Corsair Obsidian 1000D case. This distro plate is made to provide a unique water-cooling solution with dual D5 pumps for users who demand premium aesthetics, silence, and enough flow for multiple GPUs or even dual systems in one case.

This distribution plate is designed to bring the slim-lined EK Quantum aesthetics to the front of the 1000D case and to offer high flow and silent operation thanks to two serially connected genuine D5 pumps. While it is slim, it's absolutely massive in surface and weighs in at a whopping 5.3 kilograms. EK-Quantum Reflection Obsidian 1000D D5 distribution plate will only fit the Corsair Obsidian 1000D Super-Tower.

EK, the premium water cooling gear manufacturer is launching the EK-Quantum Reflection Evolv X D5 PWM D-RGB - a custom-designed water cooling reservoir, routing, and pump solution made to fit two Phanteks cases - the Phanteks Evolv X and Phanteks P600S. This distro plate is specifically designed to provide advanced water cooling with a market-leading D5 pump for users who demand premium aesthetics, silence, and powerful flow.

EK-Quantum Reflection Evolv X D5 PWM D-RGB offers an all-in-one solution that includes a D5 pump, reservoir, simple mounting mechanism, and multiple industry standard G1/4" threaded inlet and outlets. The placement of these inlets and outlets is aligned to match other EK cooling components and to minimize the number of bends the user has to make when creating the loop. The distro plate can support up to one CPU water block, four GPU blocks, and a top-mounted radiator.

EK, a premium water cooling gear manufacturer, in partnership with the prestigious Swedish case manufacturer Fractal Design, is launching the EK-Quantum Reflection Fractal ATX D5 PWM D-RGB - a custom-designed water cooling reservoir, routing and pump solution made to fit several Fractal Design ATX-size cases. This distro plate is specifically designed to provide an advanced water cooling solution with a market-leading D5 pump for users who are building custom loop liquid cooling in Fractal Design cases.

It is designed to simplify the process for beginner PC builders who are entering the hard tubing custom loop liquid cooling world, as well as to bring the slim-lined EK Quantum aesthetics to an already elegant case.

EK Water Blocks, the premium computer liquid cooling gear manufacturer, is introducing a new variant of the extended compatibility high-performance water block specially designed for reference design based NVIDIA GeForce RTX 2080 Ti graphics cards. The EK-Quantum Vector Direct RTX RE Ti D-RGB.

EK-Quantum Vector Direct RTX RE Ti D-RGB
EK-Quantum Vector Direct RTX RE Ti D-RGB water block is the version of EK-Quantum Vector water block from which the terminal is removed for added compatibility with space-constrained cases. Instead, the fittings are screwed directly into the top, allowing for a narrower enclosure. This water block uses the signature EK single-slot slim look and covers the entire PCB length. This sophisticated cooling solution will transform your powerful NVIDIA graphics card into a minimalistic, elegant piece of hardware with addressable D-RGB LED lighting.

EK, the European premium liquid cooling gear manufacturer, is releasing a new Intel X299 socket based monoblock belonging to the Quantum Line of products, the EK-Quantum Momentum ROG Rampage VI Encore D-RGB. This monoblock is engineered specifically for the ASUS ROG Rampage VI Extreme Encore motherboard from ASUS.

EK-Quantum Momentum ROG Rampage VI Encore D-RGB
This is a complete all-in-one (CPU and motherboard) liquid cooling solution for Intel Socket 2066 Core X-Series Processors and the monoblock is covering the entire VRM section of the ASUS ROG Rampage VI Extreme Encore motherboard.

EK, the premium liquid cooling gear manufacturer is launching its most extreme fan to date, the EK-Furious Meltemi 120. This 38 mm thick extreme high-static pressure radiator cooling fan is designed purely for highest-performance computer liquid cooling systems. Developed in-house on the basis of the renowned EK-Vardar fans, they have a wide PWM range of operation and the highest speed of up to 3500 rpm. Due to a 38 mm thick frame, there is space for an upgraded motor and far superior performance compared to any standard 25 mm thick fan at the same RPM range.

The Meltemi family of cooling fans carries the name of a type of strong, dry northern winds of the Aegean Sea. The name Meltemi is derived from Italian mal tempo meaning "bad weather", while we can say that the EK's Meltemi fans are "bad news" for high temperatures. These fans provide the best possible performance in pull mode. Such a regime evens out the airflow through the entire surface of the radiator since the motor hub dead zone effect is lessened. The fan is equipped with a red sleeved cable just to warn off those curious little fingers from getting hurt. Seriously, 3500 rpm is no joke, and you should be extra careful around these fans if they are in operation.

(Editor's note: Our review can be found here)

EK, the water cooling gear manufacturer based in Slovenia, Europe, is proud to present its newest addition to the Quantum Line of products - the EK-Quantum Magnitude. It's a new, ultimate CPU water block that brings the highest performance to all platforms by using specific flow distribution, cold plate geometry, and mounting pressure tailored to each IHS.

EK-Quantum Magnitude is bearing the prestigious iF Design award for the bold and different approach to the CPU water block mounting mechanism. Differentiated from any mounting structure of a water block that is usually a black and mundane plate, the design accentuates an integrated X- or H-shaped three-dimensional frame with premium finishes that firmly cradles the main body in place, while the screws are morphed into sophisticated design details.

EK, the leading premium water cooling gear manufacturer, is proud to introduce the EK-Loop Connect, a straightforward information and control hub for all the relevant parameters of your liquid cooled PC.

EK-Loop Connect
A Fan, Pump, and an Addressable D-RGB controller unit that is designed from the standpoint of an enthusiast. With this control hub you can easily set your desired RGB lighting effects with just a few clicks, as well as optimize your cooling performance, and noise levels through a simple PWM chart or pre-defined profiles. That's not all though, as you'll have the option of using external temperature sensors, flow meters, and coolant level probes.

EK Water Blocks, the premium computer liquid cooling gear manufacturer is releasing a new version of its renowned 120 mm EK-Vardar fan. The EK-Vardar X3M 120ER comes with removable rubber dampers on the corners, making sure vibration is not transferred from the fan to the rest of the PC. Aside from that, the rotor has received airflow optimizations, and on the RGB versions, the lighting solution is upgraded to addressable D-RGB LEDs.

The EK-Vardar X3M 120ER is a high-static pressure computer cooling fan built for the highest-performance computer systems. It features removable rubber dampers on corners of the fan to reduce vibration and thus noise. These rubber dampers come pre-installed for use in push orientation but can be removed and mounted the other way for a pull orientation.

EK, the leader in custom loop liquid cooling products is proud to announce the official launch of a product line that is meant for professional use. Characteristic properties of these products are robust, industrial material choices and no RGB whatsoever. The EK Professional Line of products is all about the use of high-quality materials, longevity and enhancing the power of your PC or computing unit. These new products are also suited for the most demanding customers, like servers, data centers, deep learning workstations, etc.

EK, the leader in custom loop liquid cooling is proud to announce the launch of a limited edition product which is a result of a successful collaboration between EK and In Win, the renowned case manufacturer. It started as the "best build of CES" and now it is sold in a limited edition under the name EK-Quantum In Win 909EK - Silver Limited Edition.

The EK-Quantum In Win 909EK case is a unique and heavily modified version of the very popular high-end In Win 909 case. The case itself is wider than a regular In Win 909 case in order to be able to fit two thick 480 mm XE radiators with their fans. It features an integrated distribution plate which acts also as a motherboard tray, and it can support a dual D5 pump setup. This makes it really special as there is no similar case on the market. The EK-Quantum In Win 909EK is a limited edition case and it is limited to only 200 pieces.

Take your first step into the world of liquid-cooling with the new EK-AIO (All-In-One) CPU cooler. Simple to use and easy to install, the EK AIO is a plug-and-play water-cooling solution requiring no assembly or maintenance. Top of its class cooling performance accompanied by fully customizable D-RGB lighting - the EK-AIO is an ideal solution for anyone who requires something more than an ordinary air cooler. The EK-AIO comes in three size variants, each offering different levels of cooling performance.

EK-AIO 120 D-RGB: The single 120 mm radiator version of the EK-AIO is ready to accommodate any mainstream processor on the market while running on its basic settings. It is best used in small form factor PCs where space is limited, where tall air cooling solutions are not an option, but high-performance cooling is still needed. EK-AIO 240 D-RGB: The dual fan EK-AIO with a 240 mm radiator is the perfect all-rounder for standard case sizes. The radiator surface is big enough to combat any mainstream CPU on the market and even has enough headroom for overclocking. An AIO with cooling capacities like this can either provide a super silent PC setup or can help harness the extra performance of an overclocked processor.

CES might be over, but our coverage from the event continues. TechPowerUp prides itself on visiting a lot of brands, big and small, and bringing to you our first-hand account of everything new. EK Waterblocks, or simply EKWB henceforth, had a large room in the Mandalay Bay with a big open window spanning the room, which made for challenging photography, but a well-laid out open plan made it easy for us to go over the various product segments they had to display. This post will go briefly over them, but keep in mind that nearly all products showcased do not have set retail availability info just yet.

The very first thing that caught our eyes was their new line of AIO cooling solutions, now simply called EK-AIO. These are the successors to the EK-MLC Phoenix, and the EK-Predator from before, both of which did not really change the status quo of the pre-filled AIO CPU cooling market. EK hopes that the new series, of which again they are working to finalizing the design before committing to a release window and pricing information, will change this. As with most of their new products, the EK-AIO coolers integrate RGB support with 9 dRGB LEDs in the pump/block and more on the EK-Vardar RGB fans that are used on the radiator itself. The EK-AIO series is planned to come in 120/240/360 mm radiator size options, with 1/2/3 fans respectively. Read past the break for more from the Slovenian watercooling brand.

EK Water Blocks, the Slovenia-based premium computer liquid cooling gear manufacturer,today announces the expansion of its liquid cooling gear portfolio with two new tools from the EK-Loop portfolio - EK-Loop Soft Tube Cutter and EK-Loop Modulus Hard Tube Bending Tool.

EK-Loop Soft Tube Cutter
EK-Loop Soft Tube Cutter is a small handy tool specifically made for soft tube cutting. It is compatible with various flexible soft tubing types such as PVC, EPDM, Norprene, silicone, etc. The maximum size compatibility of the cutter is 16 mm (5/8") OD. The EK-Loop Soft Tube Cutter is made in China and is available for purchase for €4.90.

EK, the European premium liquid cooling gear manufacturer, is releasing a unique chipset water block made for Aorus motherboards based on AMD X570 chipset - the EK-Quantum Momentum Chipset Aorus X570. The EK-Quantum Momentum Chipset Aorus X570 water block completely replaces the PCH (chipset) heatsink and the small fan which is the primary source of the noise. This water block-based solution removes a moving part, thus providing a more long term solution with 0 noise and far superior thermal performance.

This chipset block is specifically made for the Gigabyte X570 Aorus Elite, Gigabyte X570 Aorus Ultra and Gigabyte X570 Aorus Master motherboards. The EK-Quantum Momentum Chipset Aorus X570 water block is made in Slovenia, Europe and is available for pre-order through EK Webshop and Partner Reseller Network. This Quantum Line water block will start shipping on the 22nd of January 2020 for €39.99.