EK, the premium liquid cooling gear manufacturer, is introducing the ultimate water cooling solution for Intel Arc A750 and A770 graphics cards. These new Intel GPUs get a premium Vector² water block solution with a passive backplate. The EK-Quantum Vector² ARC A750/A770 are single-package liquid cooling solutions consisting of a Vector² series water block and a black-anodized aluminium backplate. Its aesthetics are dominated by minimalist straight lines and the backplate coming around the side of the GPU to cover the PCB completely.

The Vector² cooling engine combines the jet plate with a 3D-machined Plexi insert to improve flow distribution and thermal performance. This cooling engine is based on an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings and still achieve top performance. EK took great care to achieve a symmetrical flow domain by utilizing an internal bridge to secondary components. This was done to ensure the cooling of secondary components without sacrificing flow distribution over the GPU core.

EK, the premium liquid cooling gear manufacturer, is now introducing the ultimate water cooling solution for Zotac AMP Extreme AIRO and Trinity GeForce RTX 4080 and 4090 graphics cards. Zotac's RTX 4090 cards get a water block with a passive backplate or a cooling solution with an active backplate that's sandwiching the card between two water blocks for the best possible cooling results. Zotac's RTX 4080 AMP Extreme and Trinity graphics cards get only a standard water block solution with a passive backplate and no active backplate.

The EK-Quantum Vector² AMP/Trinity RTX 4090 and EK-Quantum Vector² AMP/Trinity RTX 4080 are single-package liquid cooling solutions consisting of a Vector² series water block and a black-anodized aluminium backplate. As with the previous 30-series Vector² water blocks, its aesthetics are dominated by minimalistic straight lines and the backplate coming around the side of the GPU to cover the PCB completely.

EK, the premium liquid cooling gear manufacturer, just launched the ultimate water cooling solution for the complete Gigabyte GeForce RTX 4080 lineup - Aorus Master, Gaming, Aero, and Eagle series GPUs. The EK-Quantum Vector² Master RTX 4080 D-RGB comes in the form of a water block with a black anodized aluminium backplate as an additional cooling surface.

The all-new Gigabyte GeForce RTX 4080 graphics cards are expected to be significantly more powerful than their 30-series counterparts. And while their efficiency is also improved, these cards still pull over 320 W, which means they will benefit even more from water cooling. This is especially true due to the 4 nm production process, which increases thermal density compared to the previous 8 nm chips.

The long-awaited 3rd of November is here with the latest AMD Radeon RX 7000-series GPUs launch. More good news is that EK, the premium water-cooling gear manufacturer, is ready with EK-Quantum Vector² water blocks for the reference models of the new AMD Radeon RX 7900 XTX GPUs. The new Radeon graphics cards come with a special memory cache dies (MCD) next to the main chip - Graphics Compute Die (GCD). The cooling engine has been modified to cool the MCDs as well, aside from the usual GPU components that are also being cooled, like the VRM, VRAM, Voltage Controllers, and the chip die.

The new Radeon RX 7900 XTX GPUs have GCD that is manufactured in a cutting edge 5 nm process, allowing 54% improvement of performance per watt. While the GPU is efficient, it does still use more power than the previous generation. At 355 W total board power that is packed in a smaller package than ever, with 300 mm² GCD that contains 165% more transistors per mm² than the previous generation. Overall these GPUs feature 58 billion transistors for 61 TFLOPs of performance.

EK, the leading computer cooling solutions provider, is now offering an enterprise-grade GPU water block for NVIDIA GeForce RTX A5000 graphics cards. This new water block incorporates a CNC-machined nickel-plated copper base with a laser-cut stainless-steel top for a robust metal cooling solution, effectively making it a single-slot assembly. EK-Pro GPU WB RTX A5000 - Nickel + Inox water block is purpose-designed for the RTX A5000 graphics cards. This water block cools the GPU, VRAM, and VRM (voltage regulation module) as the cooling liquid is channeled directly over these critical areas.

This liquid cooling solution uses an Open Split-Flow cooling engine design that proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means it can be used with weaker water pumps or pumps running on low-speed settings and still achieve top performance. The decreased coolant flow requirement makes it an ideal solution for multi-GPU workstations. The jet plate and fin structure geometry have been optimized to provide balanced flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios.

EK, the premium liquid cooling gear manufacturer, is introducing new water blocks for NVIDIA GeForce RTX 4080 Founders Edition graphics cards. The EK-Quantum Vector² FE RTX 4080 D-RGB comes in the form of a water block with a passive backplate and offers two options for the top material. It cools all the critical GPU components, ensuring peak performance and a prolonged lifespan of the card.

The EK-Quantum Vector² FE RTX 4080 is a liquid cooling solution that is actually a set of a Vector² series water block, a black-anodized aluminium backplate, and a custom-made single-slot PCIe bracket - all in a single package. As with the previous 30-series Vector² water blocks, the look is dominated by minimalist straight lines and the backplate coming around the side of the GPU to cover the PCB in its entirety.

EK, the premium liquid cooling gear manufacturer, is now introducing the ultimate water cooling solution for MSI Trio and Suprim GeForce RTX 4090 graphics cards. The EK-Quantum Vector² Trio RTX 4090 D-RGB comes in the form of a water block with a passive backplate or a cooling solution with an active backplate that's sandwiching the card between two water blocks for the best possible cooling results.

The all-new RTX 4090 Trio and Suprim cards are expected to be significantly more powerful than their 30-series counterparts. And while their efficiency is also improved, these cards still pull over 450 W, which means they will benefit even more from water cooling, mainly due to the 4 nm production process, which increases thermal density compared to the previous 8 nm chips.

EK Water Blocks, the premium liquid cooling gear manufacturer, is launching the updated version of EK-Quantum Power Kits. The new kits are modular and allow users to have their pick of parts, including the water block, radiator thickness, finishes for fittings, reservoir, etc. All those new Matrix7-compatible parts are also included, like the latest Surface radiators and award-winning Velocity² CPU water blocks. These kits are aimed at enthusiasts who want a very high-end solution to cool their powerful PC hardware but without picking each and every custom loop part all by themselves. Still, these kits allow some degree of customization to perfectly match the customer's PC theme. New Power Kits make the loop-building experience easier thanks to all the extra accessories, 90-degree fittings, configurable coolants, and more.

Kits based on the Velocity² water block are available in 240 mm, 360 mm, and 480 mm radiator sizes. EK-Quantum Power Kits offer the CPU water block choice for AM4, LGA1700, and LGA1200, based on customers' preferences since Velocity² water block is socket-specific to ensure optimal performance on every platform. AM5 option will be added at a later date.

EK, the premium liquid cooling gear manufacturer, is launching a specialized water block that fits two distinct GPUs from Gigabyte - Aorus GeForce RTX 4090 Master and Gigabyte GeForce RTX 4090 GAMING. EK-Quantum Vector² Master RTX 4090 D-RGB comes in the form of a water block with a passive backplate. The all-new Aorus RTX 4090 Master and Gigabyte RTX 4090 Gaming cards are expected to be significantly more powerful than their 40-series counterparts. And while their efficiency is also improved, these cards still pull over 450 W, which means they will benefit even more from water cooling, mainly due to the 4 nm production process, which increases thermal density compared to the previous 8 nm chips. To top it off, the Master is a behemoth of a card, and opting for water cooling instead of the factory-mounted air cooler, allows you to shrink it several times in the thickness department.

The EK-Quantum Vector² Master RTX 4090 is a single-package liquid cooling solution consisting of a Vector² series water block and black-anodized aluminium backplate. As with the previous 30-series Vector² water blocks, its aesthetics are dominated by minimalist straight lines and the backplate coming around the side of the GPU to cover the PCB completely.

EK, the premium liquid cooling gear manufacturer, is now introducing the ultimate water cooling solution for ROG Strix and ASUS TUF GeForce RTX 4090 graphics cards. EK-Quantum Vector² Strix/TUF RTX 4090 D-RGB comes in the form of a water block with a passive backplate or a cooling solution with an active backplate that's sandwiching the card between two water blocks for the best possible cooling results.

The all-new RTX 4090 Strix and TUF cards are expected to be significantly more powerful than their 30-series counterparts. And while their efficiency is also improved, these cards still pull over 450 W, which means they will benefit even more from water cooling, mainly due to the 4 nm production process, which increases thermal density compared to the previous 8 nm chips.

EK­, the premium water-cooling gear manufacturer, is introducing a new portfolio of Quantum Line terminals from the Scalar² family. The two products that come in the first wave include EK-Quantum Scalar² Terminal - Plexi and EK-Quantum Scalar² DirectLink Terminal - Plexi. These are see-through acrylic versions of the current terminals for Vector² water blocks and Vector² ABP sets. In the future, the Scalar² family will grow. So, you can expect more similar products like SFF terminals, multi-GPU terminals, and much more.

This see-through terminal replaces the stock black POM acetal terminal on the Vector² GPU water blocks. It has four G1/4" ports, two on the top and two at the bottom. Sleek magnetic covers can be used to conceal the terminal screws that allow rotation of the branding when the GPU water block is inverted in the case or is being used on a vertical GPU mount. The screws and magnetic plate should be re-used from the original terminal and are not a part of the Scalar² package.

The MEG PROSPECT 700 Series is MSI's first high end PC case that sits in the MEG segment. It has 2 models: the MEG PROSPECT 700R and 700RL. The main difference between the 2 models are that the MEG PROSPECT 700R has a 4.3" IPS touch panel while the MEG PROSPECT 700RL has a LED switch button on the IO port instead. This new mid-tower PC cases series enjoys a wide variety of features designed to improve the users' overall experience and better the performance of the entire computer system.

The MEG PROSPECT 700R has a 4.3" touch panel IPS display that can help users manage and control the entire system easily. Through the touch panel, users can control the lighting effects and speed of the fans. Different types of graphics can be displayed as well, including GIFs, photos, weather, or time. Users can also choose to display the internal temperature of the system, which can be shown in accordance with a sensor placed in the system by the users.

EK, the European manufacturer of premium liquid cooling gear, and MSI, a world-leading gaming brand, have traditionally partnered up to launch an X670E-based motherboard that comes packaged with a Quantum-design monoblock. This time, it will come in a Limited Edition run. The monoblock offers unparalleled cooling for the VRM section and the AMD Ryzen 7000 series CPUs, as well as a plethora of other nifty features, like the integrated flow meter and temperature sensor, allowing users to have precise checks on their loop status.

Cooling the Ryzen 7000 CPUs is no small feat, and air coolers struggle to get the most out of them. The new Ryzen 7000 series CPUs don't have a fixed frequency as CPUs used to. Instead, the boost clock is primarily contingent on thermals and, secondarily, power. Here's where liquid-cooled EK-Quantum Momentum² Monoblock comes into play. Not only does it make sure that your CPU is properly cooled, but it also ensures the power delivery system is as cool as possible. This allows the user to push performance to the limits while having a quiet system that stays as cool as possible.

After the launch of water blocks for the 40 Series NVIDIA GeForce RTX graphics cards, EK, the premium liquid cooling gear manufacturer, is introducing the ultimate cooling solution for these flagship GPUs. EK-Quantum Vector² FE RTX 4090 D-RGB ABP Set is, as the name says, a set of water blocks covering both the front and the back of the graphics card. The front is cooled by a water block identical to the already launched model, while the active backplate water block cools the backside of the card.

The all-new RTX 4090 FE cards are expected to be significantly more powerful than their 30 Series counterparts. And while their efficiency is also improved, these cards still pull up to 450 W, which means they will benefit even more from water cooling. This ultimate cooling set consists of a high-performance GPU water block and the latest generation of Active Backplate cooling solutions in a single enclosure. Although FE 4090 does not have VRAM on the backside, the active backplate still helps lower temperatures by cooling the PCB behind the core, VRM, and VRAM. Since the PCB has a lot of copper, it soaks a lot of heat, transferring it across its surface and warming other components. By effectively cooling the PCB, the entirety of the GPU becomes cooler.

EK, the premium liquid cooling gear manufacturer, is releasing a unique pump-reservoir-water block combo for Intel 12th Gen Core CPUs and LGA 1700 socket-based motherboards. It features the latest socket-specific EK-Quantum Velocity² cooling engine, while the CPU water block has an integrated DDC 4.2 PWM pump that is cooled by the metal part of the water block acting as a heatsink. The combo is the perfect companion for ITX (SFF) builds where space for a dedicated pump and reservoir is an issue. This product effectively combined four different products into a single small enclosure for ultimate space-saving.

The product combines a Velocity² CPU water block, a genuine DDC 4.2 PWM pump with a reservoir, and a DDC heatsink. All this is contained in an assembly significantly smaller than the sum of its parts. A total of four products in a footprint of a hefty CPU water block that fits perfectly. EK-Quantum Velocity² series CPU water blocks embed the next-generation cooling engine. They use a specific combination of mounting pressure and coldplate geometry tailored for the IHS and die layout of Intel LGA 1700 socket processors. Low hydraulic flow restriction enables these products to be used in setups with weaker water pumps or lower pump speeds for added silent operation while still being able to easily achieve top performance. The lathe-turned coldplate is made with precision to cover the IHS effectively and put pressure on the die area.

EK, the premium liquid cooling gear manufacturer, is releasing new loop cleaning and prepping solutions compatible with EK-CryoFuel coolants and all EK tubing types. The goal is to enable EK customers to extend their coolants' life and avoid contamination breakdowns by using safe and compatible chemicals. An added benefit for the customers is they can now get everything in the EK shop, avoiding additional transport costs.

The purpose of the EK-Cryofuel Loop Cleaner is to clean your existing loop before pouring in new coolant or to fully prepare a new, unused custom loop. It removes any manufacturing residues, impurities, and coolant stains. This is not a stand-alone product as it requires a subsequent use of the Superflush solution to pick up any residue from the cleaner and ensure maximum stability of your new coolant.

EK, the market leader in high-end water cooling for PC products, wishes to inform existing and future customers regarding the compatibility of our existing cooling solutions with the highly anticipated AMD Socket AM5 platform. Compared to Socket AM4, the backplate mounting hole pattern is still 54 x 90 mm and uses UNC 6-32 threads, but the AM5 motherboards now have an integrated CPU-socket backplate. The stock backplate is best kept untouched since removing it also means fiddling with the CPU loading mechanism and exposing the socket pins. To avoid such risks, some EK products need to be updated, but fear not, as compatibility is handled for all existing EK products.

EK, the leading professional computer liquid cooling manufacturer, launches two new EK-Pro Quick Disconnect Manifold kits for 2CPU/2GPU and 2CPU/4GPU system configurations. This EK-Pro Kit series contains ultra-reliable CPC quick disconnect couplings and high-performance EK-Pro manifolds, making it the ideal solution for making your professional liquid cooling loop easily serviceable and upgradable with minimal downtime. The EK-Pro manifold system, combined with QDCs, enables users to easily add or remove water blocks within the cooling loop without draining the entire system. This prevents downtime for workstations and other professionally used computer setups.

It features a full acetal body, stainless steel end caps, and nickel-plated brass plugs. Pre-assembled, out of the box, it is set up to be used in a semi-parallel setup. The kit contains a universal manifold mounting system that can be used in various scenarios. The steel mounting plate is equipped with 120 mm and 140 mm fan mounting patterns found in almost all computer and workstation cases. CPC's dripless quick disconnect couplings (QDCs) are made of ultra-durable PPSU and are compatible with most industry standard coolants and cooling loop materials. They support a wide range of operating temperatures and, thanks to the quality lubrication of the valve mechanisms and stainless-steel springs, will provide smooth operation for up to 10,000 cycles. EPDM's O-rings and seals ensure a long service life free of leaks.

EK, the leading computer cooling solutions provider, is announcing the latest generation of EK-Quantum Velocity² water blocks. These socket-specific water blocks are engineered specifically for the upcoming AMD AM5 socket and Ryzen 7000-series CPUs. Like its AM4 predecessor, the AM5 water block features EK-Matrix7 compatibility, which means it's designed according to the standard where the product's height and port distance are managed in 7 mm increments.

The product deploys a modified Velocity² cooling engine optimized for Ryzen 7000-series CPUs to ensure the best cooling performance and optimal coolant flow. While the mounting hole pattern of the new AM5 socket is still 54 x 90 mm, the AM5 motherboards now have an integrated CPU socket backplate with #UNC 6-32 threads, therefore requiring a new mounting system.

EK, the Slovenia-based premium PC liquid cooling gear manufacturer, launches its first external screen for PC enthusiasts - EK-Quantum Lumen 7" LCD. This Quantum series 7-inch screen is a stylish and functional addition to any liquid cooling setup. The display is recognized as an additional desktop by your OS, offering a handy way of displaying any content your want or monitoring the computer's vital parameters like component and coolant temperatures, fan RPM, core frequency, and more.

This is a high-quality IPS screen designed to be mounted inside the PC case or to be used as an external monitor for temperature, hardware load, and other information. It has a wide SVGA resolution of 1024 x 600 pixels. Its diagonal is 7 inches long, with the IPS panel type for superior viewing angles and vivid colors. It connects to the PC through HDMI 2.0 cable that is included in the package and an internal Type-A USB 2.0 port. Another USB Type-C cable is also included for using Lumen as an external display.

EK, the leading computer cooling solutions provider, releases the latest generation of its TEC solution - the EK-Quantum Delta² TEC - a CPU water block for extreme cooling. In collaboration with Intel, EK has developed a next-generation water block for enthusiasts seeking consistent peak performance and ultimate overclocking of the unlocked 12th Gen Intel Core desktop processors.

This water block is based on Peltier (ThermoElectricCooler) technology and can transport heat using the Peltier effect. Inside the TEC plate, the Peltier effect produces a temperature difference between the two sides by flowing a current through it. This means the cold plate, which is in contact with the CPU, can be lowered to sub-ambient temperatures while the liquid cooling loop cools the hot side of the TEC.

Gold is the quintessential symbol of status, power, immortality, and wealth, often reserved for royalty, so why not add some to your PC? After the immense success and popularity of gold-plated EK-Torque fittings, EK, the premium custom loop liquid cooling manufacturer, has decided to expand its golden portfolio even further.

In the past few weeks, several gold-plated products made it to the EK Webshop, and with the most recent launch of the golden EK-Quantum Convection M.2 NVMe heatsink, EK has rounded up the expansion of its golden portfolio. We must not forget to mention that genuine gold was used for the plating of all these products, so it's not a sham. Plus, everyone knows these are good times to invest in gold.

Gaming is no good without the proper gear for your PC environment, and EK has decided to solve that issue for you! EK Water Blocks, the premium liquid cooling gear manufacturer, is preparing a brand new product category for gamers and PC enthusiasts called the EK Loot. Things are being kicked off with a couple of sleek minimalistic mousemats, ranging from small to extra large. But fear not; these will not be the only EK Loot products to hit the shelves since more cool essentials are soon to follow to create the right environment for your PC.

EK, the premium water cooling gear manufacturer, is expanding the Reflection² distribution plate series with a new product specifically designed for the Lian Li O11D Mini case. The EK-Quantum Reflection² PC-O11D Mini D5 PWM D-RGB is a custom water cooling reservoir, routing, and pump solution that seamlessly fits into the front of the case and includes the enthusiast-favorite D5 pump. This product is EK-Matrix7 compatible and is easily implemented with other EK-Quantum products that are Matrix7 compatible, allowing for straight and easy tubing runs.

Designed to offer unique aesthetics and ease of use, this advanced all-in-one waterway solution comes with a pump, reservoir, simple mounting mechanism, and multiple industry-standard G1/4" threaded inlets and outlets. The placement of these inlets and outlets is aligned to fit with other EK-Matrix7 compatible products to minimize the number of tube bends when you're creating the loop. It was engineered to support a maximum of five components.

EK, the premium liquid cooling gear manufacturer, is releasing the EK-Quantum Momentum² Strix Z690-I Gaming D-RGB - Plexi, a new Intel LGA1700 socket-based monoblock belonging to the Quantum Line of products. This monoblock is engineered specifically for the ROG STRIX Z690-I GAMING motherboard from ASUS. The addressable D-RGB LED in the monoblock is compatible with ASUS Aura Sync RGB control and offers a full lighting customization experience for every single diode at any given time. This Momentum² monoblock is EK-Matrix7 compatible.

This is a complete, all-in-one (CPU and motherboard) liquid cooling solution for Intel 12th gen Core series processors and is compatible with the LGA 1700 socketed ROG Strix Z690-I Gaming ITX motherboard. The monoblock uses the latest generation of EK Velocity² cooling engine to ensure the best possible CPU cooling without reducing the flow to other components. This water block directly cools the Alder Lake CPU and the VRM section. A special M.2 heatsink has been added to cool the front-mounted M.2 SSD drive. EK also added an additional I/O piece that carries the stock I/O cover, so the original look of this ROG Strix motherboard is preserved.