ASUS today rolled out an entry-level mini-ITX motherboard for the AMD socket AM4 platform, the Prime A320I-K. Based on the AMD A320 chipset, the board supports 1st and 2nd generation Ryzen processors out of the box, including the 8-core models. The tiny A320 chipset is tucked away behind a metal heatspreader underneath the M.2-2280 slot. The board draws power from a combination of 24-pin ATX and 8-pin EPS connectors, conditioning it with a 6-phase VRM that makes do without a heatsink.

Storage connectivity on the A320I-K includes four SATA 6 Gbps ports, and an M.2-2280 slot with PCI-Express 2.0 x4 and SATA 6 Gbps wiring from the SoC. The board's lone expansion slot is a PCI-Express 3.0 x16. USB connectivity includes six USB 3.1 gen 1 ports, four on the rear-panel and two via headers; and four USB 2.0 ports, of which two are via headers. Display connectivity includes one each of DisplayPort and HDMI. Networking is care of a single 1 GbE interface driven by a Realtek RTL8111H controller, and the onboard audio solution is an entry-level Realtek ALC887. We expect the Prime A320I-K to be priced around $60.

ASRock will be showing the world's first Thin Mini-ITX form factor - RX570TM-ITX/TBT graphics card, which adapts with AMD Radeon RX570 graphics card and supports Intel Thunderbolt 3 technology. The RX570TM-ITX/TBT graphics card is not only the first graphics card with a Thunderbolt 3 Type-C interface which supports 40Gb/s transfer rate and power delivery, but it also features 4 USB 3.1 Gen1 ports, Gigabit Ethernet, and SATA 6Gb/s interface.
The RX570TM-ITX/TBT graphics card is based on the Thin Mini-ITX concept. With this graphics card, All-in-One PC manufacturers can develop their own Thunderbolt monitors with 3D performance and power charging with less effort. Moreover, it would be able to fit in a mini ITX chassis. By connecting a notebook through Thunderbolt 3 Type-C interface, it helps to increase the notebook's 3D computing power and charge the notebook at the same time.

There's no better way to kick off 2019 with the launch of new products, the motherboards featuring Intel B365 chipset launched during CES 2019 aims mostly at mainstream market but with huge improvement on not only functionality but also aesthetics, the product line are formed by total of 5 motherboards including Mini-ITX, the ever popular PRO series and the latest Phantom Gaming motherboards, giving a wide range of selection for everyone.

As M.2 NVMe SSDs get ever more attractive through affordability, capacity and performance, it is certain that these lightning fast storage devices will soon be a must have solution for gaming or even everyday use. ASRock has seen this trend and went all out to be the first to include the M.2 heatsink as standard equipment for the mainstream motherboard, the B365 Phantom Gaming 4 even has two separate M.2 heatsink for secondary high speed M.2 SSDs.

During our visit with Silverstone, we had the opportunity to check out their new case lineup which consists of numerous new designs including an all-new Raven prototype. Keeping the unique internal layout established by the previous generations alive, the new Raven has the motherboard I/O pointed towards the top with two 180 mm air penetrator fans located at the bottom operating as intakes with a single 120 mm fan at the top as an exhaust. The design makes use of the simple concept that heat rises to great effect. Drive space is limited to a single 3.5" or 2x 2.5" drives, meaning as of now builders eyeing this new design will want to stock up on M.2 drives. While we don't have official specifications in regards to radiator support, we can say there is plenty of room to set up a water cooling loop multiple mounting points provided near the back and sides of the chassis.

Moving on the side panels are both tempered glass which gives the case a uniform look, however, thanks to that, you can forget about hiding your wire mess behind a solid back panel. Instead, the Raven Prototype will be better suited for those who meticulously route their cables keeping things exceptionally neat and tidy. As for the front panel I/O, it is located on the top left above the side panel and consists of 2x USB 3.0 ports and the usual microphone and headphone jacks. In general, the angular design of the previous Raven cases remains but has been toned down just a bit, giving this latest iteration a sleeker, stealthier appearance.

While we have covered the MonsterLabo "The First" case earlier this year with it appearing at Computex 2018 and again with further details later, it was also on the showroom floor at CES, meaning we were able to get a closer look. While the design promises passive cooling, the system that was opened for viewing on the showroom floor was equipped with a single 140 mm Noctua fan (can't-miss that color scheme). Which means we can't consider it a passive cooling case as shown. However, it is likely that with lower TDP parts it is entirely possible. Even so, with the use of a single low noise 140 mm fan it handled the configured systems just fine. One system used an Intel Core i5-8600K and an NVIDIA GeForce GTX 1060 (Far West mod), while another (white) system featured an Intel Core i5-8500 and a GeForce RTX 2070.

Update: We have some exclusive images of the case in the hot Nevadan desert, managing to still look cool.

ECS has released a brand new Mini-ITX motherboard that supports 8th Gen Intel CPUs in the i3/i5/i7, Pentium and Celeron segments in the form of the H310XH5-TI. The motherboard is based on Intel's H310 chipset. Since there's no need for a souped-up VRM solution on this motherboard, there's a 4+1 phase affair present. There are 2x SO-DIMM slots with support for up to 32 GB of DDR4-2667 memory, 1x M.2-2280 slot for PCIe/SATA SSDs, 2x SATA 6 Gbps connectors, and 1x M.2 slot for a Wi-Fi/BT add-in card.

I/O wise, there are 1x GbE port (Realtek 8111H), 1x HDMI 1.4 output, 1x HDMI 1.4 input, 4x USB 3.0 Type-A connectors (two internal and two external), 2x USB 2.0 Type-A ports, and 2x audio jacks. Audio is powered by Realtek's ALC662 codec and a six-channel DAC. There's also a 19VDC input for power delivery straight to the motherboard, and numerous internal headers for expansion, such as a card reader header, a webcam header, a touch board header, a camera header, and an IR sensor header, which suggest a highly-integrated system that can be more than just a small PC.

Following MSI, which has already introduced its 2070 Aero Mini-ITX graphics card, GIGABYTE is looking to be the next vendor to introduce such a form-factor graphics card. Being Mini-ITX, the PCB real-estate is small, hence the option for a single-fan cooling solution. And of course, since a smaller cooling system and PCB imply more concentrated heat output, the GIGABYTE GeForce RTX 2070 Mini-ITX will ship with stock clocks and no factory overclocking (which means 1410 base and 1620 MHz boost clocks).

Connectivity-wise, the GIGABYTE GeForce RTX 2070 Mini-ITX features five display connectors: 3x DisplayPort 1.4, 1x HDMI 2.0b and 1x VirtualLink, which all fit in due to the dual-slot design of the graphics card. Pricing is unknown for now.

IBASE Technology Inc. (TPEx: 8050), a leader in the manufacture of industrial motherboards and embedded systems, announces the new MI995 in mini ITX form factor (170x170 mm) based on the latest 8th Gen Intel Core / Xeon E family processors and Intel CM246/QM370 mobile chipset.

The MI995 low-power Mini-ITX delivers stunning graphics and media performance and supports up to three independent displays in eDP, HDMI 2.0a, DVI-D and DisplayPort outputs, which makes it ideal for gaming/entertainment, digital signage and POS applications. The motherboard has two DDR4-2666 SO-DIMM sockets accepting up to 32GB memory with ECC. Apart from enhanced performance of CPU and graphics, the MI995 features optimized I/O with onboard 6x USB 3.1, 4x USB 2.0, 4x COM, and up to 4x SATA III to empower real-time IoT and data-intensive applications.

First announced at Computex, MonsterLabo "The First" case was for sure a surprise in the world of fanless, passive cooling solutions. The original announcement is somewhat different from the final version of the case, which in fact will be available in two successive editions. The first one, B.1, will be a 100 (black only) units edition available on December 15th. The second one, B.2, will have 300 pieces that will be available in black and also white color at the beginning of 2019. The MonsterLabo "The First" will have a price tag of 429 euros.

MonsterLabo promises that its design can passively cool a high-end configuration with a Core i7-8700K (95W TDP) and a NVIDIA GeForce GTX 1080 (180 W TDP), although proper tests with intensive workloads will have to confirm that. The case includes a Noctua 140 mm fan (NT-A14), and has a steel housing measuring 205 x 215 x 420 mm (L x W x H) which weighs 7 kilograms.

Swedish startup Nuxcase set out on its journey to make PC cases "simpler, cooler, and better." Big things have small beginnings, and the company's first creation is the Chassi, a mini-ITX tower-type case that looks bigger in pictures than it is. Clad in five contrasting 2-tone color options with clear acrylic making up the side and front panels; the case features a "slide-in" tray. You assemble your motherboard and graphics card (vertically) along the mount, and slide it into the case. A PCIe x16 riser connects to your motherboard.

The Chassi supports graphics cards up to 18.5 cm in length, and CPU coolers no more than 6 cm in height, restricted by the graphics card. The case features a mount for an SFX power supply and a couple of 2.5-inch drive bays. Despite its size, there's room for up to two 80 mm fans. It measures 110 mm x 215 mm x 245 mm (WxDxH). There's also a tiny handle that lets you haul it around. Available now, the Nuxcase Chassi is priced at SEK 400 (USD $44.2).

Raijintek today announced the Ophion and Ophion EVO cases. The Raijintek Ophion and Ophion EVO are two impressive M-ITX cases that are not only affordable at just £119.99/£129.95, but more importantly offer a range of features not often seen in small form factor cases.

The Ophion and Ophion EVO can accommodate a full size 330mm GPU alongside a standard ATX power supply, with the Ophion EVO even supporting top mounted 240mm AIO coolers in a case that's just 17.4cm wide. The case itself has a brushed aluminum front panel alongside two tool-less tempered glass side panels; It also includes a full speed PCIe 16x Riser Cable.

BIOSTAR adds a mini-ITX motherboard with the RACING X470GTN for the second generation AMD Ryzen processors, Pinnacle Ridge and Raven Ridge. The BIOSTAR RACING X470GTN packs powerful features in a small form factor for gamers on the move. It has a premium black RACING themed PCB design, Digital Power+, Hi-Fi zone design, integrated USB 3.1 Gen 2 (Type A + C), Iron Slot Protection, and Advanced VIVID LED DJ for more RGB lighting control.

BIOSTAR RACING X470GTN
The BIOSTAR RACING X470GTN is a mini-ITX form factor motherboard with one PCI-E 3.0 x16 slot and supports two dual-channel memory of up to DDR4-3200MHz (OC). The RACING X470GTN has a 7-digital power phase design to harness the power of the new Ryzen 7 2700X 8-core, 16-thread processor. The motherboard also packs 4x SATA III ports, 1x M.2 32Gb/s port and integrated USB 3.1 Gen 2 (Type A and C).

CORSAIR, a world leader in PC components high-performance gaming hardware and enthusiast memory, today announced the launch of the new CORSAIR VENGEANCE SODIMM DDR4 4,000MHz 32GB (4x8GB) kit, the world's fastest DDR4 SODIMM DDR4 memory kit.

While PC enthusiasts might be more familiar with SODIMM memory from laptops or all-in-one PCs, CORSAIR VENGEANCE SODIMM DDR4 4x8GB 4,000MHz is designed to power the latest small-form-factor systems running Intel's high-end-desktop X299 motherboard platform. Motherboards such as the ASRock X299E-ITX are able to fit all the power and performance of Intel's high-end motherboard chipset into a tiny Mini-ITX form factor but have, until now, been limited on memory frequency and bandwidth. With CORSAIR VENGEANCE SODIMM DDR4 4x8GB 4,000MHz, PC builders and enthusiasts can now pack 32GB of high-frequency quad-channel 4,000MHz DDR4 alongside Intel's Core i9 processors, for up to 36 threads of processing power and massive memory bandwidth, in Mini-ITX small-form-factor PCs.

After first announcing the Taku in Computex 2016, PC Cooling and peripherals innovator CRYORIG is releasing the Taku PC monitor stand ITX case. The Taku has been in development for over 2 Years in house, with over 1 year of co-development with manufacturing partner Lian Li. The Taku is finally releasing after a brief appearance on Kickstart during the Summer. Although unsuccessful as a Kickstarter project the Taku gained enough popularity and initial backers for CRYORIG to continue developing the Taku and push for a product launch. The Taku will first be released in the USA, Japan and Taiwan beginning in December. All original Kickstarter backers will be given the option to pre-order and are guaranteed to receive a unit before the end of December including a free CRYORIG C7.

The Taku is a hybrid between a PC Monitor Stand and a high-end ITX form factor PC case. The benefit of this design is that the monitor, keyboard and the full PC system is arranged vertically on top of each other. Meaning the total footprint is lowered, and valuable desk space is made available. The Taku is compatible with GPU's up to 280 mm, ITX form factor mainboards, SFX or SFX-L power supplies, fully capable of housing a high-end Gaming PC. Taku's storage space is also well taken care of. The Taku can also fit 1x 3.5" HDD, two 2.5" SSD/HDD.

ASRock Rack, a new division of ASRock which deals with enterprise-grade motherboards, introduced the C3758D4I-4L, a mini-ITX motherboard based on the Atom C3758 "Denverton" SoC that embeds an 8-core CPU clocked at 2.20 GHz, 16 MB of cache, and a dual-channel DDR4 integrated memory controller supporting up to 256 GB of ECC memory, topped off with a 25W TDP. These specs lend Denverton quasi-enterprise credentials. The C3758D4I-4L can be used for low-cost rack-mount web-servers, or even high-end DIY NAS or home-server builds.

The C3758D4I-4L comes with a factory-fitted fan-heatsink cooling the pre-installed Atom C3758 BGA SoC. The board draws power from a combination of 24-pin ATX and 8-pin EPS power connectors (including a 4-pin connector for external 12V). The SoC is wired to four DDR4 DIMM slots, supporting up to 128 GB of dual-channel ECC memory; and a PCI-Express 3.0 x8 slot. Storage connectivity includes a staggering 13 SATA 6 Gbps ports, five on board, eight via two mini SAS connectors. An ASPeed AST2500 provides display, legacy I/O, and remote management. The board features a staggering five 1 GbE connections with teaming, PXE, and NCSI support. The company didn't reveal pricing.

Raijintek have just release three new cases for their tempered glass series: the Coeus Elite, Coeus Evo, and Paen M. The Paean M is Raijintek's first watercooled open bench case. All three cases feature up to four individual panes of 4.0 mm tempered glass giving a great view to their new range of LED fans. In addition to the three new cases, Raijintek have also announced the PAXX conversion kit consisting of a riser card extender cable and a special PCI slot bracket.

Mini-ITX boards are among the most difficult to produce. Their diminutive 6.7" x 6.7" dimensions leave little real estate for slots and ports, let alone the extra features that make ROG unique. We're not willing to compromise your experience for a compact footprint, so it takes some time and creativity to make everything fit. But it's worth the effort, because our new Strix X370-I Gaming and Strix B350-I Gaming motherboards for Socket AM4 raise the bar for small-form-factor Ryzen builds. They match the cutting-edge features of their full-sized siblings, including liquid-ready cooling and addressable RGB lighting, and they combine an M.2 SSD heatsink and amped-up audio on an innovative riser card.

Today Streacom is delighted to announce the official arrival of the BC1 Mini, a lightweight, toolless benchtable that has been designed specifically for Small Form Factor systems. Co-developed with HWBOT, OverClocking-TV, the BC1 Open Benchtable is a community-developed product that has won awards from Red Dot and iF Design in recognition of its portability, esthetics and design prowess. Available in Q4 2017, the BC1 Mini follows the same design principles of the BC1 Open Benchtable, arriving in choice of three colors to match your preference.

"Just one year after we launched the popular BC1, we hope the enthusiast community will again be excited to receive the BC1 Mini, an Open Benchtable that re-defines the rules about small, compact and portable systems" commented commented Isaïe Simonnet, Project Development Manager, VP of OverClocking-TV.

Size matters! For years, Big powerful and tons of expandability has been the golden rule for high-end motherboards especially for Intel X299 Platform, but powerful machine doesn't have to be huge and bulky, ASRock has successfully crammed all amazing spec and features into a Mini-ITX sized motherboard, the world's first Mini ITX X299 motherboard is here.

The ultimate Mini-ITX has to have everything, X299E-ITX/ac was built on a X299 platform to give ultimate processing power, dual Intel Gigabit Lan along with dual band 2.4/5GHz 802.11ac WiFi provides the best connectivity, USB3.1 Gen2 Type A+C are also available at the rear of the motherboard, more amazingly this little beast also supports quad channel memory up to DDR4 4000 MHz(OC), stunning performance on such a small motherboard.

Lian Li Industrial Co. Ltd is proud to present the new range of all-Aluminium PC chassis, the PC-Q50, PC-V320, and PC-V720. In a time of tempered glass and RGB lighting, Lian Li's new cases offer a return to classic PC chassis, crafted with high-quality materials and offering a spacious solution to high-performance builds for regular desktop and HTPC use. Despite their classic looks, the PC-Q50, PC-V320, and PC-V720 are all equipped with, and ready for the latest PC technology, this includes a USB 3.1 Type-C connector on the front panel. All three models will be available in a bare Aluminium or Black and come equipped with in take and exhaust fan (depending on the model) in an already well-vented chassis. With models sized for Mini-ITX, MicroATX and ATX motherboards, PC enthusiast looking for a luxurious case to adorn their desk or home entertainment center have a freedom of choice.

Colorful today rolled out the iGame Z270I-WF, a variant of the iGame Z270I motherboard featuring wireless networking. The socket LGA1151 motherboard is based on Intel Z270 Express chipset, and draws power from a combination of 24-pin ATX and 4-pin ATX power connectors, conditioning it for the CPU using a 6-phase VRM. The CPU is wired to two DDR4 DIMM slots, and the board's lone PCI-Express 3.0 x16 slot.

Storage options include four SATA 6 Gbps ports, and a 32 Gbps M.2 slot on the reverse side. Networking includes 802.11ac WLAN, Bluetooth 4.1, and two gigabit Ethernet interfaces, one driven by an Intel i219-V controller, and the other by Realtek DragonLAN (RTL81118AS) controller. USB connectivity includes six USB 3.0 ports, and two USB 3.1 ports (including a type-C port). The onboard audio solution combines a 115 dBA SNR CODEC (Realtek ALC1150), with ground-layer isolation and audio-grade capacitors. The company didn't reveal pricing.

GIGABYTE introduced the AB350N-Gaming WiFi, its first socket AM4 motherboard in the mini-ITX form-factor, with support for the entire Ryzen "Summit Ridge" processor family, the 7th generation "Bristol Ridge" A-series APUs, and the upcoming Ryzen "Raven Ridge" APUs. The board draws power from a combination of 24-pin ATX and 8-pin EPS power connectors, and conditions it for the AM4 SoC with a 6-phase VRM. The motherboard is based on AMD B350 chipset.

The AM4 SoC is wired to two DDR4 DIMM slots, supporting up to 32 GB of dual-channel memory, the lone PCI-Express 3.0 x16 slot, a 32 Gb/s M.2 slot on the reverse side of the PCB, two out of four of the board's SATA 6 Gb/s ports, and two out of six of the board's USB 3.0 ports. Other USB connectivity includes two USB 3.0 ports from the B350 chipset, and two 10 Gb/s USB 3.1 ports (both type-A). Networking includes a WLAN card with 802.11ac WiFi, and Bluetooth 4.2, and gigabit Ethernet. 8-channel HD audio driven by a 120 dBA SNR CODEC makes for the rest of it. The company didn't reveal pricing.

ASUS has further increased its Intel 200-series chipset-based motherboards with the addition of two Mini-ITX motherboards. The H270I and B250I join the ROG staple of motherboards from ASUS, which means these come packed with features and are being marketed for gamers. Though the features are looking a bit thin, which was to be somewhat expected given the lack of PCB real-estate to house them.

These two motherboards do not support any kind of OC, and memory speeds are thus limited to the stock Intel 2400 MHz (and further limited to two sticks of memory up to a 32 GB total.) Furthermore, there is a single PCIe 3.0 x16 slot, a gaping absence of PCI ports, but a saving grace of two M.2 ports in each motherboard. Which are, yes, very hard to see: one of them fits in the front of the PCB, under the double-decker heatsink design over the PCH that allows an M.2 drive to be stacked on top of it, which means the PCH and the M.2 drive are cooled by the top of the heatsink. The other, which we can't see in the pictures, is located on the back of the motherboard. Both M.2 connectors can handle full-speed PCIe 3.0 x4 NVMe SSDs, as well as Intel Optane Memory, but only one of them supports SATA-based M.2 solid state drives.

Lian-Li Industrial Co. Ltd is proud to announce the PC-O11WGX, certified by Asus Republic of Gamers and updated with USB 3.1 Type-C connector on the front panel. The new PC-O11WGX also comes with the popular O11-1 accessory kit with PCI-E riser cable for vertical graphics card mounting in the box! Furthermore, the front panel features exquisite ROG silk screen detailing and improved liquid cooling compatibility.

The ROG branded PC-O11WGX has been built with feedback from Lian Li PC-O11 users. This is evident by optimized layout for disks on the rear of the chassis, it can fit three 2.5" drives. This puts more focus on liquid cooling and with space for three 360mm radiators for liquid cooling (or three 120mm fans) there is enough capacity for any thermal challenge inside the PC-O11WGX.

ASUS today introduced the Republic of Gamers (ROG) STRIX H270I socket LGA1151 motherboard in the mini-ITX form-factor. The board offers most of the feature-set of its more expensive sibling, the STRIX Z270I, minus some of its CPU overclocking features, and should hence be perfect for SFF gaming PC builders who don't intend to overclock their CPUs. It is based on a different PCB from its Z270-based sibling. The board draws power from a combination of 24-pin ATX and 8-pin EPS power connectors, and conditions it for the CPU using a simple 7-phase VRM (compared to the 9-phase setup on the STRIX Z270I). The CPU is wired to two DDR4 DIMM slots, supporting up to 32 GB of dual-channel DDR4 memory; and the board's lone expansion slot, a PCI-Express 3.0 x16.

Storage connectivity includes two M.2 slots (stacked on top of each other), one which has 32 Gb/s PCIe-only wiring with NVMe support, and another with 32 Gb/s PCIe plus SATA 6 Gb/s wiring; and four SATA 6 Gb/s ports. Networking is another interesting mix, with two 1 GbE interfaces, one driven by an Intel i219V controller, and the other by a Realtek RTL8111H; and a WLAN card with 802.11ac WLAN and Bluetooth 4.1, driven by an Intel-made controller. Audio is care of ASUS SupremeFX solution, which combines a Realtek ALC1220 (120 dBA SNR) CODEC with two headphones amplifier circuits, audio-grade capacitors, and ground-layer isolation. The board also features an RGB LED lighting element in addition to RGB LED headers, driven by its Aura Sync RGB software. The company didn't reveal pricing.