Phanteks covered all its bases of its Enthoo EVOLV series, with one for the budding mini-ITX form-factor, the Enthoo EVOLV ITX. Retaining the design of its bigger siblings, this case seats a mini-ITX motherboard in a standard perpendicular tray, with two expansion slots.

Inside, it's partitioned into two halves, the bottom one holding the PSU tray and a few drive bays, while the upper one is almost exclusively a motherboard tray, with several clever fan-mounting features. For example, the case can hold three 120 mm fans on its top, and a tray holding those, slides out. There's no dearth of room, and you can install CPU coolers as tall, and graphics cards as long, as you would on a conventional ATX tower.

Phanteks announces the release of the PHTC14S. A slim dual tower CPU cooler designed from the concept of the award-winning PH-TC14PE. The PH-TC14S incorporates the dual tower and performance from the PH-TC14PE but in a slimmer form. PH-TC14S's slim form elminates any conflicts with high RAM and VRM modules in newer motherboards. The six 6mm nickel plated heatpipes with the slim aluminum fins improves heat distribution and creates better thermal convection resulting in immediate cooling.

Standing only 6.3 inches in height and 2.83 inches in width, the PH-TC14S follows INTEL's Keep-Out-Zone. Thanks to the slim design, compatiblity issues of high RAM and VRM modules are non-exsistent. PH-TC14S uses Phanteks' patented P.A.T.S. technology which has been proven to withstand high temperatures and increases cooling performance by deflecting thermal radiation from other heat sources.

Phanteks announces the release of the PHTC12LS, a low profile CPU cooler. The PH-TC12LS comes equipped with the latest PHF120MP PWM High Static Pressure fan designed to overcome airflow restriction caused by high fin density.

Designed specifically for HTPC, the PHTC12LS stands at only 47mm tall (74mm with fan) and compatible with 99mm small form factor case. The six 6mm C-type nickel plated heatpipes with the slim aluminium stacked fins delivers thermal conductivity more efficiently. The new design aluminium stacked fins are slimmer, resulting in faster heat distribution on the surface of the fins.

Phanteks, the award winning designer of the Enthoo Primo, today announced the immediate availability of the PH-F120MP and PHF140MP Series High Static Pressure fans. The new MP Series fans are designed specifically for radiators. They have the ability to overcome the airflow restriction caused by high fin density from radiators. They will be available in 120mm and 140mm sizes.

The MP Series High Static Pressure fans are equipped with a new seven blade design that can produces high static air pressure allowing for a direct and focused airflow making them ideal for the densely packed fins of a radiator. The MP Series fans delivers an outstandingly low vibration, noise and turbulence with the eight preinstalled acoustic dampers.

Phanteks announce the release of the Enthoo EVOLV, a mATX/mITX chassis with a beautiful all aluminum exterior. The EVOLV's unparalleled design features an all new quick release system for the outer panels. The EVOLV supports many high end PC components while maintaining a minimalist design.

The Enthoo EVOLV features a full aluminum exterior with a changeable color Power LED light. The EVOLV has a quick release panels for easy access to fans and dustfilters.

Phanteks announces the release of the Enthoo Luxe. The Enthoo Luxe's luxurious chassis combines flexibility and functionality without the added cost. A case worthy for all computer enthusiasts that want a great aircooling or watercooling case. Unleash unlimited possibilities with, our latest addition to our Enthoo Series, the Enthoo Luxe.

The Enthoo Luxe's front and top aluminum panels are sandblasted to create a textured appearance. This allows for an attractive and practical solution to reduce the appearance of fingerprints on the case. LED ambient lighting stretches all through the top and front of the case creating luminous edges and providing a spectacular indirect light effect.

Phanteks showed off its Enthoo EVOLV line of cubical micro-ATX cases. Available in black and white, the cases let you build high-end micro-ATX gaming builds, complete with liquid cooling. They offer a high degree of cable management potential. The Enthoo EVOLV starts out as a 2-compartment chassis, except that the top one, which in cubical cases, features motherboard tray typically flat on the bottom (along the plane of the bottom); actually has a tower-like perpendicular motherboard tray. This tray has a massive 'crawl space' behind it, letting you tame not just your cable spaghetti, but also coolant tubing. There are no 5.25-inch drive bays, but two 3.5-inch internal trays, and two additional 2.5-inch ones behind the motherboard tray. Cooling system includes a massive 200 mm front intake, and a 120 mm rear exhaust.

Phanteks showed off a pair of interesting slim aluminium fin-stack CPU coolers, the PH-TC14S and PH-TC14LS (pictured in that order below). The PH-TC14S is a unique D-type heatsink, built using two slim black aluminium fin stacks, with the cooler's only fan, a F140HP-PWM, being nestled between the two stacks. The PH-TC14LS, on the other hand, is a compact C-type heatsink, with one slim aluminium fin-stack, and the same F140HP-PWM fan. This fan can take PWM control, and spins between 600 and 1,300 RPM, pushing up to 88.6 CFM of air.

Here are the first pictures of Phanteks' attempt at an enthusiast micro-ATX case. It may be a micro-ATX case, but at 260 mm x 480 mm x 550 mm (WxDxH), it is nearly as big as an ATX mid-tower. The extra room is used not for additional expansion slots (making it an ATX case), but room for additional drives, or water-cooling components. It carries over much of its styling and utility features over from the Enthoo Prime, the full-tower that catapulted Phanteks to the top of the list of interesting case designers to look out for. Among its most notable features are dust filters for all fan intakes, intakes supporting large (>140 mm) fans, room for large 280 x 140 mm radiators, and room for as many drives as a mid-tower.A video presentation of the case and its various features, follows.

Staying true to the Enthoo Series, Phanteks releases the Enthoo Pro. Phanteks' Enthoo Pro aimed at budget-conscious enthusiasts that doesn't want to compromise on features for price. Unleash unlimited possibilities with the budget-friendly Enthoo Pro.

To reduce cost while maintaining design, the Enthoo Pro comes with a textured exterior finish that mimics the appearance of brushed aluminium. Two models of the Enthoo Pro are available. PH-ES614P will include a window side panel that allows users to showcase their water-cooling or air-cooling setup. And for users that want the visibility of their setup hidden, the PH-ES614PC comes with a non-window side panel.

Award Winning Phanteks Enthoo Primo Now Available In White. Recently we saw the launch of the Phanteks Enthoo case, a well crafted chassis suitable for enthusiasts and gamers alike. Today we see the launch of the Enthoo in a nice crisp white, bringing even more variation. Integrating the touches of the black finish, the white Enthoo keeps all the same features. A subtle white LED gives off a finishing touch producing a soft lift from the top to front of the case.

Dutch designers at Phanteks have created some of the best and most efficient coolers on the market today, well known for their unique looks and colour schemes. The Enthoo Primo is a case that sets a level of it's own and it's really a monster. When you are dealing with a company that specifically design coolers, you know the capability in a case will be above and beyond. The case has clean and elegant style, with controllable LED lighting. The stealth interior covers the PSU, HDD and cables along with grommets (modular cable cover) for the most clean and sleek looking system.

Phanteks are very well known for their high-end cooling solutions, the Dutch design team created some of the best on the market but today we see the debut of their new ATX case the Enthoo Primo. The case sets accessibility and functionality levels of its own.

Dutch designers at Phanteks have created some of the best and most efficient coolers on the market today, well known for their unique looks and colour schemes. Today Phanteks debut their new case to the world, the Enthoo Primo - a case that sets a level of it's own and it's really a monster. When you are dealing with a company that specifically design coolers, you know the capability in a case will be above and beyond. The case has clean and elegant style, refined with aluminium front and top panels along with controllable LED lighting. The stealth interior covers the PSU, HDD and cables along with grommets (modular cable cover) for the most clean and sleek looking system.

Phanteks introduces the new PH-F140SP Series premium fans. Two models are set to be released, PH-F140SP_BK and PH-F140SP_BK_LED. The fans are specifically designed to overcome high static pressure, blade deflection, and noise challenges. PH-F140SP also feature 140mm mounting holes and constitute a great case/radiator fan upgrade option for users who want better airflow for their cases and radiators. PH-F140SP_BK_LED comes with 4 LEDs attached, these fans will make any case more aesthetically appealing. The ON/OFF switch allows user to enable or disable the LEDs. PH-F140SP's nine blades with MVB feature produce powerful yet silent downdraft airflow. With the UFB bearing, composed by MOSS and SSC systems, long lifespan and rotation stability are made possible.

The new redeveloped blades in PH-F140SP are angled lower to achieve higher air pressure. The redesigned MVB blades generate better airflow and produces better performance. It improves the balance of airflow and air pressure when used as a case fan. The new nine high pressure MVB blades are precisely angled to generate a silent controlled airflow. The blades produces a downdraft vortex allowing for greater amount of air passage through and reduce airflow turbulence across the surface of the blades, to create significantly better performance and airflow while keeping noise to a minimum.

Phanteks introduces the new PH-F140XP Series premium case/radiator fans. PH-F140XP with PWM functions allows for speed adjustments, higher for performance and lower for silent operation. PH-F140XP also features 140mm mounting hole and is a fan upgrade option for users who want better airflow for their cases and radiators. PH-F140XP's nine blades with MVB feature produce powerful yet silent downdraft airflow. With the UFB bearing, composed by MOSS and SSC systems, long lifespan and rotation stability are made possible.

The new redeveloped blades in PH-F140XP Series are angled lower to achieve higher air pressure. The redesigned MVB blades generate better airflow and produces better performance. It improves the balance of airflow and air pressure when used as a case fan. The new nine high pressure MVB blades are precisely angled to generate a silent controlled airflow. The blades produces a downdraft vortex allowing for greater amount of air to pass through and reduce airflow turbulence across the surface of the blades, to create significantly better performance and airflow while keeping noise to a minimum. The eight pre-installed rubber pads are now bigger and designed to reduce more vibration.

2013 sure is turning out to be the year of smart PSUs, with debutante in the PSU market, Phanteks, unveiling its Enthoo ES700. The company recently entered the premium case market with a bang. The ES700 is a 700W 80 Plus Platinum-certified PSU, with digital VRM, semi-modular cabling, and a unique front-panel accessory that fits into 5.25-inch drive bays, giving you a live readout of load and efficiency. The same LED-based display is also located on the unit itself, next to the AC receptacle. The unit uses a single +12V rail design, offers most common protections, and uses a 135 mm fan to keep cool. The unit is still being designed, and the final version could feature sleeved cables.

Phanteks graduated from being behind some seriously great coolers and fans, to cases. The company kicked off its enthusiast PC case lineup with the Enthoo Primo. This ATX full-tower easily rivals contemporaries from Corsair, Lian Li, and the likes, in terms of quality, materials, and features. What sets the Enthoo Primo apart from other cases is its large (≥10 cm) clearance between the motherboard tray and the panel behind it. This gives you a large amount of room to route cables, coolant tubes, and even tuck away some parts of your liquid-cooling loop, such as pumps and reservoirs.

The Enthoo Primo from Phanteks features eight expansion slot bays, letting you use dual-slot graphics cards on the bottommost slot on your motherboard, six 3.5-inch drive trays spread across two cages, each tray can hold two 9.5 mm-thick 2.5-inch drives. The case offers five 5.25-inch bays that hide behind a door in the front-panel. Cooling system includes two 120 mm front intakes, a 120 mm rear exhaust, and provision for additional fans on the top (3x 120 mm), side-panel, and bottom. A 6-channel voltage-based fan-controller comes included. Phanteks stated that the price could range between 199 to 249 EUR, when the case hits markets in July.We also managed to score a video presentation of the Enthoo Primo. Watch it after the break.

Phanteks launches PH-TC12DX, a U-Type dual tower heat-sink with four 6mm heat-pipes allows for optimal airflow and cooling. PH-TC12DX's 6mm heat-pipes are linearly aligned and developed to have the least amount of air and thermal resistance. Incorporating P.A.T.S and C.P.S.C Technologies, PH-TC12DX delivers better heat dissipation and heat transfers. PH-TC12DX includes dual PH-F120HP PWM Premium fans to allow for higher performance and/or silent operation.

Phanteks introduces PH-TC90LS, a new ultra-low profile thermal radiator. With growing demands for cooling in constraint spaces, the PH-TC90LS has a slim profile and provides efficient cooling. Enthusiasts with HTPC's or multimedia cases can achieve maximum cooling while maintaining quiet performance.

The PH-TC90LS is 27mm tall (45mm with fan) and compatible with small form factor cases with a 45mm clearance. The three 6mm Heat-Pipes are aligned to ensure optimal cooling. The three copper heat-pipes are embedded for better contact and performance. The PH-TC90LS is made to ensure it has the least amount of air and thermal resistance.

Phanteks launched itself to the industry with the TC14PE line of fan heatsinks, however the variants it launched only included chrome/silver, blue, red, and orange. The company just listed a new addition, the PH-TC14PE_BK (black). This model uses black color aluminum fin stacks, and a black colored impellers in its fans.

Nothing else changes, with the TC14PE being Phantek's flagship product, an aluminum fin twin-tower heatsink, in which five nickel-plated copper heat pipes pass through the CPU base in a U-shape, with its arms passing through two independent aluminum fin stacks, which are ventilated by two 140 mm fans (1300 RPM @ 19.5 dBA). Measuring 159x140x171 mm (LxWxH), the TC14PE_BK weighs 1250 g. It should cost similar to the other variants, at 79.90 Euros.

European cooling expert Phanteks expands its product portfolio with the PH-TC14CS C-Type CPU Cooler. The PH-TC14CS measures 160 x 151 x 140.5 mm ( with dual fans), it weighs 900 grams, has five nickel-plated 8mm copper heat-pipes, and supports the latest LGA 2011/ 1155/ 1156/ 1366/ 775 and AMD FM1/ AM3+/ AM3/ AM2/ 2+/ AM3 micro-processors. Featuring Phanteks patented Physical Antioxidant Thermal Shield ( P.A.T.S) and Cold Plasma Spraying Coating Technology (C.P.S.C), PH-TC14CS provides a perfect cooling solution for low profile setups. Enthusiasts with HTPC's or multimedia cases can achieve maximum cooling while maintaining quiet performance.

Phanteks announced the launch of the Phanteks PH-F120S fan series today. The PH-F120S series ( 120mm x 25mm x 25mm ) can be used as a case fan and it is compatible with the award winning PH-TC14PE CPU Cooler. The PH-F120S comes in two colours, White frame/White blades and White frame/Black blades.

The PH-F120S fan series are designed using the unique Maelström concept technology that has already been used in the PH-F140TS fan series. Equipped with Anti-Vibration Compensators the PH-F120S offers optimum airflow while keeping the noise level down to a minimum.

Phanteks introduces PWM external adaptor for its award winning PH-TC14PE Premier CPU cooler for free! In order to optimize our products with thermal possibilities and capabilities, Phanteks includes a PWM external adaptor for its PH-TC14PE CPU Cooler. The PWM external adaptor will convert the PH-F140 fan into a PWM controlled fan. Now you can achieve silent or maximum performance automatically and give you a piece of mind.

The new PWM external adaptor can be requested free of charge here, for all current Phanteks owners. Only a proof of purchase is required. All new shipment of PH-TC14PE series will be included with PWM adapter.

The high-end CPU-Cooler from the newcomer PHANTEKS is available immediately at Caseking.de. This cooler with the name "TC14PE" already managed to receive numerous awards for its excellent performance. PHANTEKS employs multiple features to achieve such extraordinary results: a patented surface at the nano-level, twin tower design and two high-performance 140 mm fans. For the perfect looks to go with the installed hardware, the cooler is available in blue, orange red or silver.

The young company PHANTEKS has invested more than two years into the development of the TC14PE CPU coolers, as their goal was not simply to produce a good CPU cooler, but to lead the performance charts. Instead of focusing on the best heat dissipation of an open test bench, PHANTEKS has made sure that the TC14PE performs best in its intended setting - a closed system.

Phanteks announced the launch of its Premier CPU cooler PH-TC14PE with patented C.P.S.C and P.A.T.S. technology. The PH-TC14PE will be available in four models, standard color and Blue/Red/Orange Edition

Phanteks coolers are designed with patented Cold Plasma Spraying Coating Technology (C.P.S.C), a brand new technologic forming deposit that displaces heat onto corresponding metals at a quicker rate. With this technology, Phanteks coolers enhances thermal conductivity on the soldered surfaces of the heatpipes through the copper deposits.