Advanced Semiconductor Materials Lithography, or as the company is more commonly known, ASML, is apparently set to build a new factory in Taiwan for the production of advanced semiconductor lithography equipment. The new factory is said to be built in the Linkou area of New Taipei City and at the same time, bring with it its European supply chain, according to Taiwan Vice Premier Shen Jong-chin.

The new factory in Linkou is still some time away, as construction will only start in July, 2023. It will apparently be ASML's largest investment in Taiwan to date, although an exact figure of the investment wasn't given, but the new factory will take up 6.68 hectares or 66,800 square metres, suggesting it'll be a rather large facility. That said, not all the land will be used for the clean room facilities, as there will also be office buildings and warehouse buildings adjacent to the factory. No details on which suppliers ASML will bring with it to Taiwan, but it's likely that the likes of Zeiss, who supplies many of the mirrors in ASML's machines, will be setting up a local presence, alongside other key ASML suppliers. ASML already has an office in Hsinchu, about an hour south of New Taipei City.

AMD's next-generation Radeon RX 7900 high-end graphics cards are set to arrive next week and bring the new RDNA3 GPU architecture to the masses. However, it seems like the customers will have to fight for their purchase as the availability could be scarce at launch, leading to potentially increased prices with low stocks. According to Igor's Lab report, Germany will receive only 3,000 reference MBA (Made By AMD) units of Radeon RX 7900 series cards. In contrast, the rest of the EMEA region will receive only 7,000 MBA units. These numbers are lower than expected, so AIB partners may improve the supply once their designs hit shelves.

On the other hand, mainland China will not receive any MBA units of the new cards as a sign of increasing tension with Taiwan. Of course, AMD's board partners will supply their designs to China, and they are allowed to; however, it seems that only AMD is making a statement here. In addition to supply issues, the launch is rumored to be covered in BIOS issues such as memory leaks and the COVID-19 outbreak affecting production in closed factories. Of course, all of this information should be taken with a grain of salt, and we must wait for the official launch before making any further assumptions.

Currently, the US has an exclusion in place when it comes to import tariffs relating to graphics cards and GPUs imported from China, but the exclusion is set to expire on the 31st of December this year. So far, the US government has been quiet on whether or not the import tariff will be reinstated or not. If the tariff was to be reinstated, US consumers are looking at a 25 percent import duty on graphics cards, starting on the 1st of January, 2023.

There's no easy way to circumvent the tariff either, as it includes items like "printed circuit assemblies, constituting unfinished logic boards," according to Tom's Hardware. Not all graphics cards are made in China though, but the majority of graphics cards are today. It's possible that NVIDIA's move of its logistics center from Hong Kong to Taiwan could have some relation to this as well, as NVIDIA would then be shipping products out of Taiwan, rather than China, depending on how the US Customs classifies Hong Kong these days. We should know what happens in a month's time, but a 25 percent import duty on graphics cards will likely kill most sales, as most people already find them overpriced. This would of course affect AMD and NVIDIA, as well as their partners in the same way, unless they make their graphics cards outside of China.

Phison Electronics Corp., a global leader in NAND flash controller and storage solutions, announced that its latest flagship enterprise PCIe 4.0 X1 SSD solution, which was developed in partnership with Seagate was awarded the 2023 Taiwan Excellence Award. "We are very pleased that Phison's enterprise PCIe 4.0 X1 SSD solution has received this honor," said K.S. Pua, CEO or Phison. "For Taiwanese products, the mark of Taiwan Excellence is associated with innovative values that are renowned in the international market for excellence and quality."

The Taiwan Excellence Awards were established by the Ministry of Economic Affairs of Taiwan in 1993. Every year, eligible candidates are subjected to a rigorous and stringent selection system that covers four major aspects of R&D, Design, Quality, and Marketing to identify outstanding products that offer "Innovative Value" while satisfying the key criterion of being "made in Taiwan." Products that have been selected for the Taiwan Excellence Awards will serve as domestic industry examples while being promoted by the government in the international market to shape the creative image for Taiwanese businesses.

According to news out of Taiwan, NVIDIA is getting ready to move its logistics center from Hong Kong to Taiwan. The information comes from Taiwan's Minister of Economic Affairs, Wang Mei-Hua, so the source should be fairly reliable. The Taiwanese government has apparently been in negotiation with NVIDIA since some time last year and the two have now reached a consensus.

The media report didn't mention where NVIDIA will locate its new logistics center, but the company and the Taiwanese government have been discussing tax subsidies to help facilitate the move. Wang told the local media that the new logistics center should boost the local industry, least not because NVIDIA is already working with TSMC, as well as many other local suppliers and manufacturers. No details were given on when the move would take place, but it's likely to be a transition that will be drawn out, due to the fact that NVIDIA is still going to have to supply all of its customers during the move.

Although Morris Chang is no longer in charge of the day to day business at TSMC, the founder of the company is still getting his hands dirty. Chang attended the APEC Economic Leaders Meeting last week, as part of Taiwan's delegation and was questioned by the media about TSMC's future plans. The specific question was about TSMC's Arizona fab, which will initially produce chips using a 5 nm node. The US$12 billion plant is scheduled to kick off production at some point in 2024, by which time the 5 nm node should be a commonly used node rather than close to cutting edge.

When questioned about the future of the Arizona fab, Morris Chang answered that it will be moving to a 3 nm node, which is currently TSMC's most cutting edge node, that has gone into volume production earlier this year with th N3 node, which is set to be followed by the N3E node. According to Chang, there's interest by several countries to have TSMC set up fabs there, but apparently this is not something TSMC is considering at the moment. One potential reason for this would be a suitable labour force, something that has already proven to be tough for the Arizona fab.

Suppose you are following the inside of the semiconductor industry. In that case, you must be aware of the United States CHIPs act, where the US government plans to invest billions of dollars into domestic companies to boost the production of semiconductors devices on American soil. However, it seems like the Biden administration isn't the only governing body that realizes the importance of making semiconductors that power everything from entertainment to government, as Taiwan is supposed to announce a similar act for Taiwanese semiconductor makers like TSMC, MediaTek, GlobalWafers, UMC, etc. to simulate additional manufacturing and development on Taiwanese soil.

On Thursday, the Taiwanese government is expected to announce a 25% tax cut for research and development efforts of companies manufacturing their chips on the domestic playground. In addition to this tax deduction, Taiwan also plans to impose an additional 5% tax break on equipment purchasing, so companies like TSMC and GlobalWafers that purchase leading-edge equipment will be enjoying a healthy 30% smaller tax bill. This money is a Taiwanese way of creating additional funds for R&D purposes so these companies can bolster their CapEx with additional funds. We await to see what will happen tomorrow and update this story with more information as the official act gets announced.

Based on news out of Taiwan, TSMC is said to be in the early planning stages of yet another chip plant, this time for its first N1 node. The new plant will reportedly be built in a science park in Taoyuan, less than an hour south west of Taipei, according to the Commercial Times. TSMC already has a pair of chip packaging and testing facilities in the science park, making it a suitable location for a chip plant. This will be TSMC's most northern chip manufacturing plant in Taiwan, although it's not expected to start pilot production until sometime in 2027. TSMC hasn't confirmed any of the details, but the company didn't outright deny the report either.

Despite the potential global downturn in the economy, TSMC appears to be fully committed to continue to build new fabs for increasingly smaller nodes. The company is set to start its first commercial production on its N3 node this quarter and is expecting the N3 node to contribute as much as four to six percent of its overall revenue in 2023. Its N2 node should enter commercial production in 2025, but not much is known about the state of the N2 node at this point in time. The N1 node might end up being a 1.4 nm node, based on TSMC's measurements, but the company is still in the very beginning of the R&D phase for this node.

Another quarter, another record breaking earnings report by TSMC, but it seems like the company has released that things are set to slow down sooner than initially expected and the company is hitting the brakes on some of its expansion projects. The company saw a 79.7 percent increase in profits compared to last year, with a profit of US$8.8 billion and a revenue of somewhere between US$19.9 to US$ 20.7 billion for the third quarter, which is a 47.9 percent bump compared to last year. TSMC's 5 nm nodes were the source for 28 percent of the revenues, followed by 26 percent for 7 nm nodes, 12 percent for 16 nm and 10 percent for 28 nm, with remaining nodes at 40 nm and larger making up for the remainder of the revenue. By platform, smartphone chips made up 41 percent, followed by High Performance Computing at 39 percent, IoT at 10 percent and automotive at five percent.

TSMC said it will cut back its CAPEX budget by around US$4 billion, to US$36 billion, compared to the earlier stated US$40 billion budget the company had set aside for expanding its fabs. Part of the reason for this is that TSMC is already seeing weaker demand for products manufactured using its N7 and N6 nodes, as the N7 node was meant to be a key part of the new fab in Kaohsiung in southern Taiwan. TSMC is expecting to start production on its first N3 node later this quarter and is expecting the capacity to be fully utilised for all of 2023. Supply is said to be exceeding demand, which TSMC said is partially to blame on tooling delivery issues. TSMC is expecting next year's revenue for its N3 node to be higher than its N5 node in 2020, although the revenue is said to be in the single digit percentage range. The N3E node is said to start production sometime in the second half of next year, or about a quarter earlier than expected. The N2 node isn't due to start production until 2025, but TSMC is already having very high customer engagement, so it doesn't look like TSMC is likely to suffer from a lack of business in the foreseeable future, as long as the company keeps delivering new nodes as planned.

Acer has launched its Predator BiFrost Arc A770 graphics card in Taiwan and the official pricing appears to be NT$12,900 or US$404, local shops are already selling the card for far less. The BiFrost comes with 16 GB of GDDR6 memory and an overclocking option that boosts the GPU speed from 2,200 MHz to 2,400 MHz. The latter also increases the TDP from 250 to 280 Watts. As seen in the launch announcement pictures, the card has a rather unusual fan design and Acer has even come up with some marketing names for the setup. The blower fan is referred to as Aeroblade 3D and the regular 92 mm fan as Frostblade 2.0. We're not sure how there's a version 2.0 when this is Acer's first retail graphics card.

The card measures 267 x 117.75 mm and has as we've also seen, a pair of 8-pin power connectors. The port configuration consists of three DP 2.0 ports and one HDMI 2.1 port. Local shops are offering the card on sale for US$372 to as little as US$313 (NT$9990), which is only US$13 more than Intel's own Arc A750 cards retail for in Taiwan. This price point makes it a fair bit more attractive, even taking potential driver related issues and hardware limitations into account.

Semiconductor manufacturers worldwide are forecast to expand 300 mm fab capacity at a nearly 10% compound average growth rate (CAGR) from 2022 to 2025, reaching an all-time high of 9.2 million wafers per month (wpm), SEMI announced today in its 300 mm Fab Outlook to 2025 report. Strong demand for automotive semiconductors and new government funding and incentive programs in multiple regions are driving much of the growth.

"While shortages of some chips have eased and supply of others has remained tight, the semiconductor industry is laying the groundwork to meet longer-term demand for a broad range of emerging applications as it expands 300 mm fab capacity," said Ajit Manocha, SEMI President and CEO. "SEMI is currently tracking 67 new 300 mm fabs or major additions of new lines expected to start construction from 2022 to 2025."

Global fab equipment spending for front-end facilities is expected to increase approximately 9% year-over-year (YOY) to a new all-time high of US$99 billion in 2022, SEMI announced today in its latest quarterly World Fab Forecast report. The report also shows the global fab equipment industry increasing capacity this year and again in 2023. "After achieving a record level in 2022, the global fab equipment market is projected to remain healthy next year driven by new fabs and upgrade activity," said Ajit Manocha, SEMI President and CEO.

Taiwan is expected to lead fab equipment spending in 2022, increasing investments 47% YOY to US$30 billion, followed by Korea at US$22.2 billion, a 5.5% decline, and China at US$22 billion, a 11.7% drop from its peak last year. Europe/Mideast this year is forecast to log record high spending of US$6.6 billion, a 141% YOY surge this year though outlays remain comparatively smaller than in other regions. Strong demand for high-performance computing (HPC) advanced technologies is driving the region's jump in spending. The Americas and Southeast Asia are also expected to register record high investments in 2023.

Based on a report by Tom's Hardware, AMD's CEO Lisa Su is planning a trip to Taiwan in the next couple of months. It is said that she is planning to meet with multiple partners in Taiwan, such as ASUS, Acer and maybe more importantly, ASMedia, which will be the sole maker of chipsets for AMD, once the X570 chipset is discontinued. AMD is apparently also seeing various less well known partners that deliver parts for its CPUs, such as Nan Ya PCB, Unimicron Technologies and Kinsus Interconnects.

However, it appears that the main reason for Lisa Su herself to visit Taiwan will be to meet with TSMC, to discuss future collaboration with CC Wei, TSMC's chief executive. This is so AMD can secure enough wafer allocation on future nodes, such as its 3 nm and 2 nm class nodes. The move to these nodes is obviously not happening in the near future for AMD, but considering that TSMC is currently the leading foundry and is operating at capacity, it makes sense to get in early, as the competition is stiff when it comes to getting wafer allocation on cutting edge nodes. It's unclear which exact 3 nm class node AMD will be aiming for, but it might be the N3P node, which is said to kick off production sometime next year. Lisa Su is also said to have meetings with TSMC, SPIL and Ase Technology when it comes to advanced packaging for AMD's products. This includes technologies such as chip-on-wafer-on-substrate (CoWoS) and fan-out embedded bridge (FO-EB), with AMD already being expected to use some of these technologies in its upcoming Navi 3x GPUs.

On the evening of September 17, an earthquake with a magnitude of 6.4 on the Richter scale occurred in Guanshan Township, Taitung. Yesterday (9/18) afternoon, an earthquake with a magnitude of 6.8 on the Richter scale occurred in Chishang Township, Taitung. Following up on these recent powerful earthquakes, TrendForce's investigation into their impact on Taiwan's semiconductor and panel industries is as follows:

In terms of foundries, due to shock-absorbing plant designs, earthquake vibrations inside fabs are one level of magnitude less than outside. In terms of equipment manufacturers, currently there are no reports of substantial factory damage. In the worst case, some machinery required initialization after crashing. In terms of memory, Nanya Technology has already carried out a shutdown inspection. If there was any wafer damage, Nanya maintains sufficient inventory to compensate. Micron recalled engineers to inspect equipment and has confirmed no losses. Thus, the capacity utilization rate of these two companies has not been affected nor has supply.

According to the latest TrendForce statistics, revenue of the top ten global IC design houses reached US$39.56 billion in 2Q22, growing 32% YoY. Growth was primarily driven by demand for data centers, networking, IoT, and high-end product portfolios. AMD achieved synergy through mergers and acquisitions. In addition to climbing to third place, the company also posted the highest annual revenue growth rate in 2Q22 at 70%.

Qualcomm continues in the No. 1 position worldwide, exhibiting growth in the mobile phone, RF front-end, automotive, and IoT sectors. Sales of mid/low-end mobile phone APs were weak but demand for high-end mobile phone APs was relatively stable. Company revenue reached US$9.38 billion, or 45% growth YoY. NVIDIA benefitted from expanded application of GPUs in data centers to expand this product category's revenue share past the 50% mark to 53.5%, making up for the 13% YoY slump in its game application business, bringing total revenue to US$7.09 billion, though annual growth rate slowed to 21%. AMD reorganized its business after the addition of Xilinx and Pensando. The company's embedded division revenue increased by 2,228% YoY. In addition, its data center department also made a considerable contribution. AMD posted revenue of US$6.55 billion, achieving 70% growth YoY, highest amongst the top ten. Broadcom's sales performance in semiconductor solutions remained solid and demand for cloud services, data centers, and networking is quite strong. The company's purchase order backlog is still increasing with 2Q22 revenue reaching US$6.49 billion, an annual growth rate of 31%.

Based on media reports out of Taiwan, TSMC seems to have plenty of customers lined up for its 3 nm node, with Apple being the first customer out the gates when production starts sometime next month. However, TSMC is only expected to start the production with a mere 1,000 wafer starts a month, which seems like a very low figure, especially as this is said to remain unchanged through all of Q4. On the plus side, yields are expected to be better than the initial 5 nm node yields. Full-on mass production for the 3 nm node isn't expected to happen until the second half of 2023 and TSMC will also kick off its N3E node sometime in 2023.

Apart from Apple, major customers for the 3 nm node include AMD, Broadcom, Intel, MediaTek, NVIDIA and Qualcomm. Contrary to earlier reports by TrendForce, it appears that TSMC will continue its rollout of the 3 nm node as previously planned. Apple is expected to produce the A17 smartphone and tablet SoC, as well as advanced versions of the M2, as well as the M3 laptop and desktop processors on the 3 nm node. Intel is still said to be producing its graphics chiplets with TSMC, with the potential for GPU and FPGA products in the future. There's no word on what the other customers are planning to produce on the 3 nm node, but MediaTek and Qualcomm are obviously looking at using the node for future smartphone and tablet SoCs, with AMD and NVIDIA most likely aiming for upcoming GPUs and Broadcom for some kind of HPC related hardware.

According to TrendForce investigations into the DRAM market, under pressure from ever-increasing output, Korean manufacturers have significantly increased their willingness to compromise on pricing in order to stimulate buying from distributors and customers, leading to a steady expansion of falling prices. In addition to Korean manufacturers enthusiastically slashing prices, low-priced chips from the spot market are also circulating in the market. Other suppliers have no choice but to follow suit and fervently reduce pricing for sales, rapidly exacerbating the 3Q consumer DRAM price drop from the original estimate of 8~13% to a quarterly decline of 13-18%.

Looking forward to Q4, it will be difficult for stocking momentum to recover before terminal inventories have been completely depleted. TrendForce expects the price of consumer DRAM to continue to fall until oversupply in the market is alleviated. Thus, consumer DRAM pricing will carry on moving lower by another 3~8% in Q4 and the possibility of sustained decline cannot be ruled out.

Last week's news about Mediatek signing an agreement to use Intel's Foundry Services (IFS) led to some speculation as to what Mediatek would be manufacturing at IFS. Details have now emerged in the Taiwan press about Mediatek's plans and the first products will be using the Intel 16 process, what was previously known as its 22 nm node. As such, we're not talking about anything cutting edge or even remotely close, but that's hardly a problem for Mediatek, as the company makes a vast range of products suitable for the node.

MediaTek CEO Rick Tsai mentioned that IFS will be used for producing semiconductors for digital TVs and wireless access networks at an investor conference in Taiwan. This suggests that most of the components might not even be for Mediatek itself, but rather its subsidiaries, such as MStar or Airoha. MStar is a company that produces a wide range of lower-end smart TV chips, whereas Airoha has ended up taking over Mediatek's networking and Bluetooth business units. Admittedly, Mediatek still has some of these types of products under its own brand, but these tend to be higher-end products that would require a more advanced node than 22 nm in most cases. Mediatek's move to IFS has raised concerns in Taiwan that the smaller foundries might be losing business from Mediatek over time, which means that UMC and PSMC are going to be on the losing end of this deal.

Based on a report from IC Insights, it appears that the demand for semiconductors and memory is starting to slow down. The slowdown is industry wide, with most major players having seen a reduction in sales in June compared to May. Although the report is focused on Taiwanes semiconductor companies, it also mentions Micron, who is expecting a slowdown in the third quarter of this year. Micron is reportedly expecting a drop in sales by as much as 17 percent, although this past quarter the company saw an increase in sales by 11 percent compared to the previous quarter, or 19 percent compared to last year, so it could simply be that the market is starting to normalise.

As for the Taiwanese semiconductor companies, TSMC saw a reduction in sales of five percent in June, although its competitor UMC saw an increase of two percent. Two other Taiwanese foundries, Powerchip and Vanguard, saw a decrease of four percent and an increase of three percent respectively, which shows that the foundry businesses are seeing change based on the type of chips they make. Apart from Winbond and Macronix, the other four companies in the report saw a decrease in sales by anything between two and 26 percent. Novatek, a manufacturer of semiconductors for the display industry saw the biggest dip in sales, with memory manufacturer Nanya seeing a drop of 16 percent. It should be pointed out that Novatek saw an increase in sales of 78 percent during the pandemic, which suggests their customers might not be seeing the same demand for their end products as they did over the past two years. For now, this could just be a slowdown over the summer months, when demand is usually quite low, but it could also be an indication of a return to a more normalised market.

Today, leading global fabless chipmaker MediaTek Inc., [joined by Indiana Governor Eric J. Holcomb, Deputy Secretary of Commerce Don Graves, Indiana Secretary of Commerce Bradley B. Chambers, and Purdue College of Engineering's Dr. Mung Chiang] announced their commitment to accept a state transition assistance package from the Indiana Economic Development Commission (IEDC) to support its very first Midwest semiconductor chip design center in West Lafayette, Indiana. MediaTek also shared its intention to create a new research partnership with Purdue to collaborate on engineering talent development and new research on next-generation computing and communications chip design. The news was shared with senior leaders, other international investors and policymakers assembled in National Harbor, Maryland for the 2022 SelectUSA Investment Summit.

This novel partnership in Indiana represents a new U.S. growth model for MediaTek USA; outside the traditional centers of gravity for chip design. "We believe strongly that being in Indiana means we'll have access to some of the best engineering talent in the world," said Dr. Kou-Hung Lawrence Loh, Corporate Senior Vice President of MediaTek Inc. and President of MediaTek USA, Inc. "Not just at Purdue, but West Lafayette is only four hours away from nearly a dozen of the top engineering schools in the country. In the post pandemic world, top candidates tell us they want to be closer to home, near family and they want to have a real house and great schools. Indiana offers all that and more."

The island of Taiwan is in many ways very much still stuck in an era where the government controls most utilities and where there is little to no competition. For example, the government controls fuel prices, be that for your motor vehicle or for cooking and heating. This also applies to the cost of electricity in most cases and the Ministry of Economic Affairs has announced that the electricity price will increase by up to 15 percent for high usage customers, which translates to the industry. The increase might sound tiny at just over 1.3 cents per kilowatt hour, for a total cost of 10.43 cents per kWh. However, a company like TSMC that uses a lot of electricity, is expected to see an increase in costs of at least US$135 million per year, according to some Taiwanese news sources, while others claim it'll be as much as US$270 million.

TSMC does in all fairness produce some of its own electricity thanks to solar panels on many of its buildings and the company has also invested heavily in renewable energy. In fact, TSMC has bought up almost all available renewable capacity in Taiwan and the company is committed to using 100 percent renewable energy in the long term. Currently a mere 8 percent (based on 2020 estimates) is coming from TSMC's own efforts, but the company should be at somewhere around 12-15 percent overall. Even so, these extra costs are likely to be reflected in future customer pricing. It's the first price hike in four years, but as Taiwan is a manufacturing nation, TSMC is unlikely to be the only company affected, but the price hike is related to global inflation and is targeting high-usage businesses and consumers alike.

Hsinchu, Taiwan-based global semiconductor silicon wafer company, GlobalWafers, announced today that it plans to build a state-of-the-art 300-millimeter silicon wafer factory in Sherman, Texas, which is the first of its kind in the USA over twenty (20) years. Construction is expected to commence later this year. This 300-millimeter greenfield investment is consistent with the Company's announcement on February 6th of this year of brownfield and greenfield expansions totaling NTD 100 bn. This new Texas investment could also support as many as 1,500 jobs with production volumes ultimately reaching 1.2 mn wafers per month after multiple stages of equipment installation, in alignment with market demand.

300-millimeter silicon wafers are the starting material for all advanced semiconductor fabrication sites (or fabs), including recently announced United States (US) expansions by GlobalFoundries, Intel, Samsung, Texas Instruments and TSMC. Most of these wafers are currently manufactured in Asia, forcing the US semiconductor industry to highly rely on imported silicon wafers. This investment will represent the first new silicon wafer facility in the US in over two decades and close a critical semiconductor supply chain gap.

Nanya Technology, part of the Formosa Plastics Group, which is one of the largest conglomerates in Taiwan, will hold a ground-breaking ceremony for its new 12-inch fab that will be built in New Taipei City later this week. It'll be the biggest investment Nanya has done in the past decade, as the company is investing US$10.1 billion into building the new fab. This is obviously a lot less than TSMC is investing, but DRAM is made on different nodes to those that TSMC makes its customers products on, since DRAM doesn't benefit as much from node shrinking as other types of semiconductors.

The new fab will be located near one of Nanya's current fabs, in the Taishan district. Mass production is scheduled to start some time in 2025 and the fab is said to have a monthly capacity of around 45,000 wafers. Right now it's scheduled for a 10 nm technology node, but this might change by the time that the fab is up and running, especially considering that Nanya is already producing a range of 10 nm based products in some of its current fabs. Nanya's goal is to develop its next generation of 10 nm DRAM independently from other DRAM makers, as to avoid having to pay patent licence fees to its competitors.

With the course of the COVID-19 pandemic constantly changing, China is sticking with its "Dynamic Zero-COVID Policy" and has been slow to lift the lockdown on its cities that have been recently affected by the outbreaks of the disease. Hence, the manufacturing industries of the major Chinese cities are facing delays in the resumption of normal operation, and a production gap has emerged in 2Q22. For the electronics ODMs, this production gap will be difficult to bridge in 2H22. Additionally, the ongoing global inflation is keeping prices of goods at a very high level, and this trend will dampen the peak-season demand surge during the second half of the year. The effect of the inflationary pressure has been especially noticeable in the demand for consumer electronics such as smartphones, notebook computers, and tablet computers. This, in turn, is also impacting the MLCC market in terms of demand and inventory. Currently, the general inventory level has risen above 90 days for MLCCs of all sizes. Therefore, TrendForce forecasts that prices of consumer-spec MLCCs will fall further by 3-6% on average in 2H22.

On the other hand, demand remains fairly strong in application segments such as high-performance computing solutions (which include servers), networking equipment, industrial automation solutions, and energy storage systems. Furthermore, IDMs in the semiconductor industry will be adjusting the allocation of production capacity as the market for consumer electronics continues to experience a slowdown in 2H22. As a result, the undersupply situation for certain ICs will ease. Moreover, demand will be propped up in the high-end segment of the MLCC market and other application segments (e.g., automotive electronics and industrial equipment). All in all, thanks to the demand related to automotive electronics, servers, networking equipment, etc., TrendForce forecasts that the annual total MLCC shipments will increase by 2% YoY to around 2.58 trillion pieces for 2022.

Global fab equipment spending for front-end facilities is expected to increase 20% year-over-year (YOY) to an all-time high of US$109 billion in 2022, marking a third consecutive year of growth following a 42% surge in 2021, SEMI announced today in its latest quarterly World Fab Forecast report. Fab equipment investment in 2023 is expected to remain strong.

"The global semiconductor equipment industry remains on track to cross the $100 billion threshold for the first time as shown in our latest update of the World Fab Forecast,"said Ajit Manocha, president and CEO of SEMI. "This historic milestone puts an exclamation point on the current run of unprecedented industry growth."