Gigabyte teased us with pictures of its high-end socket LGA2011 motherboard featured in its G1.Killer series of motherboards designed for the gamer-overclocker market. The G1.Assassin 2, as it's called, is based on the Intel X79 chipset. We don't have landscape pictures of the board, yet, but whatever little bits of pictures we do have, reveal quite a bit. To begin with, this board will retain the black+green "weapon" styling of predecessors in the series. The LGA2011 socket is wired to four DDR3 DIMM slots, in sets of two, on either sides of the socket. Each DIMM slot has its own memory channel.

From the CPU VRM heatsink, a heat pipe is finding its way to a stylized X79 PCH heatsink. This heatsink is designed to look like a handgun. Since it's so small, it isn't looking as realistic as the clip design featured on other G1.Killer motherboards. There are just six internal SATA ports we can find from the picture, two 6 Gb/s, and four 3 Gb/s. In terms of expansion slots, we could spot three PCI-Express 3.0 x16 slots, these could be arranged in the x16/x16/NC or x16/x8/x8 lane configuration.

ASUS is ready with a new PCI-Express 3.0 compliant socket LGA1155 motherboard, adding to its recently-launched line of Intel Z68 chipset-based boards that feature Gen 3.0 PCI-Express x16 slots. This latest one is part of the elite Republic of Gamers (ROG) family, and is built on the compact micro-ATX form factor, called Maximus IV Gene-Z/Gen 3. This is the second modification of the Maximus IV Gene, the original was based on Intel P67 chipset, the Gene-Z replaced the chipset with Intel Z68 that supports Smart Response technology, while the Gene-Z/Gen 3 adds PCI-Express 3.0 x16 slots.

The board uses a 12-phase Digi+ VRM for the CPU, it is wired to four DDR3 DIMM slots supporting DRAM speeds of up to DDR3-2200 MHz with overclocking. The socket is wired to two PCI-Express 3.0 x16 slots over Gen 3 compliant switches and electrical components, the slots configure to PCI-Express 3.0 x8/x8 when both are populated. PCI-Express Gen 3 support requires next-generation 22 nm Ivy Bridge Core processors, which will be launched next year. The only other expansion slot is an open-ended PCI-Express 2.0 x4, wired to the Z68 PCH. NVIDIA SLI and AMD CrossFire are supported.

Corsair, a worldwide designer and supplier of high-performance components to the PC gaming hardware market, today announced their new line of Vengeance PC gaming peripherals, including three new gaming headsets.

"The award-winning Corsair Gaming Series audio products have built a reputation for providing accurate, detailed audio that makes everything from games to music and movies a joy to listen to, as well as creating the situational awareness gamers need for a competitive advantage," said Andy Paul, Corsair's President and CEO. "Our new Vengeance gaming headsets continue that tradition. Everything from the sleek design and the careful choice of materials, to the obsessive focus on audio tuning is dedicated to the goal of providing a compelling experience for PC gamers who are as passionate about sound as they are about winning."

Gigabyte released pictures of G1.Sniper 2, the company's first socket LGA1155 motherboard in the G1.Killer series of motherboards designed for gamers with overclocker alter-egos (the same market ASUS Republic of Gamers targets). The board is based on the Intel Z68 Express chipset without any additional PCI-E bridge chip such as NVIDIA nForce 200. The board supports 2nd generation Core "Sandy Bridge" LGA1155 processors. The first G1.Sniper was a LGA1366 motherboard based on Intel X58 chipset.

Apart from being yet another high-end 2-way SLI/CrossFire Z68 motherboard, which Gigabyte's mainline Z68X series motherboards already achieve, the G1.Sniper 2 packs two extremely gamer-specific onboard devices: the Bigfoot Killer E2100 low-latency, high-offload PCI-Express network controller with its of dedicated memory; and Creative Sound Blaster X-Fi hardware audio with CA20K2 PCIe processor and 64 MB XRAM, backed by a high-grade Cirrus Logic DAC and OPAMP circuit, driving signal-noise ratio easily above 105 dBA with punchy bass.

Recently, ASUS released the Maximus IV Extreme-Z, a variant of the Maximus IV Extreme motherboard, based on Intel Z68 chipset. The original is based on Intel P67. ASUS' premium micro-ATX motherboard, the Maximus IV Gene got the same treatment, with Gene-Z. Back when ASUS was designing its Republic of Gamers lineup for socket LGA1155, P67 was the premium discrete-graphics chipset, which was later dethroned by Z68, which gives you everything P67 does, plus access to the processor's integrated graphics (letting you use Intel QuickSync), and Intel Smart Response SSD caching technology.

The Maximus IV Gene-Z uses a design very similar to its predecessor. The LGA1155 socket is powered by an impressive 12-phase Digi+ Extreme Engine VRM, 2-phase VRM for the dual-channel DDR3 memory, supporting speeds as high as DDR3-2000 MHz. Expansion slots include two PCI-Express 2.0 x16 (x16/NC or x8/x8), supporting NVIDIA SLI and AMD CrossFire; and an open-ended PCI-E x4. ASUS managed to pack in two SATA 6 Gb/s ports, four SATA 3 Gb/s ports, and connectivity that includes SupremeFX X-Fi 8-channel audio, eSATA, gigabit Ethernet, USB 3.0, and HDMI 1.4a (the lone display connector). ASUS nearly all ROG-exclusive features such as consolidated voltage measurement points, iROG, ROG UEFI, etc.

Bigfoot Networks, the technology company behind the Killer line of high-performance networking products, today at Computex announced that ASUS has expanded its line of Killer E2100-based motherboards with their new ROG Crosshair V Formula/ThunderBolt Motherboard.

The new ASUS ROG Crosshair V Formula/ThunderBolt Motherboard supports AMD FX Series CPUs with up to 8-cores, DDR3 Memory with overclocking speeds up to 2133 MHz, multi-GPU technology for CrossFireX and NVIDIA SLI, 8-ch HD, SupremeFX X-Fi 2 audio from Creative Labs and more. Powered by Bigfoot Networks' Killer E2100 networking platform and a host of other gaming-centric features, this AMD FX-based motherboard combines innovative design and technical intelligence to make the PC gaming experience more rewarding and accessible. This is the second motherboard offering from ASUS to incorporate Killer E2100 gaming network capabilities, preceded by the ROG Rampage III Black Edition.

When Intel's Sandy Bridge platform was launched, P67 Express was perceived as the top of the line discrete graphics chipset that gives performance segment users everything they'll ever need. ASUS hence based its prestigious ROG Maximus branded motherboard based on it, and came up with the Maximus IV series. With Intel releasing a higher-end chipset with the Z68 Express, ASUS decided to redo its socket LGA1155 ROG motherboard lineup, with the Maximus IV Extreme-Z. The new motherboard gives users access to the processors' embedded graphics via a HDMI port, and gives them the benefit of Intel Smart Response technology that P67 lacks.

The Maximus IV Extreme-Z looks similar to its P67-based cousin. Based on the Intel Z68 chipset, the motherboard uses an NVIDIA nForce 200 bridge chip to ensure PCI-Express connectivity to up to four graphics cards, supporting NVIDIA SLI and AMD CrossFireX. The CPU is powered by ASUS Digi+ Extreme VRM, backed by high-grade components and proadlizers to condition power. There are four DIMM slots supporting dual-channel DDR3-2000 MHz memory by overclocking. Expansion slots include four PCI-Express 2.0 x16 (x16/NC/x16/NC or x8/x8/x8/x8), there's also a PCI-E x1 and open-ended PCI-E x4.

Here are some of the first proper pictures of ASUS ROG Crosshair V Formula motherboard, a set of press-shots leaked to the Czech press, which has since been retracted. The ROG Crosshair V Formula comes in two packages, with and without ASUS Thunderbolt card (an addon card by ASUS that provides Bigfoot Killer NIC and Sound Blaster X-Fi hardware-accelerated audio). The Crosshair V made its first appearance with a box-shot disclosure by NVIDIA announcing SLI on AMD chipset motherboards; later a table listing out specifications of some of ASUS' fist socket AM3+ motherboard was published.

The Crosshair V Formula is a socket AM3+ motherboard based on AMD 990FX + SB950 chipset, supporting AMD's upcoming FX-series processors based on the Bulldozer architecture. It combines the best features ASUS has to offer, targeting both gamers and overclockers. The AM3+ socket is powered by a strong 10-phase Digi+ Extreme Engine VRM, it supports dual-channel DDR3 memory with speeds of over DDR3-2133 MHz. Expansion slots include four PCI-Express 2.0 x16, which configure as x16/x16/NC or x16/x8/x8, with the fourth slot being electrical x4, wired to the southbridge. NVIDIA 3-way SLI and AMD CrossFireX are supported.

Here is the complete socket AM3+ motherboard first-wave of ASUS, the M5A series, short and sweet. Based entirely on AMD 9-series chipset, including 9-series southbridge chips, the first-wave caters to gamer, performance, and enthusiast market segments, and only includes those chipset models that rely on discrete graphics (leaving out AMD 980G, 990GX). The lineup even includes models from ASUS' gamer/enthusiast-oriented Republic of Gamers (ROG) family, and The Ultimate Force (TUF) family.

The lineup starts with three models based on AMD 970 + SB950 chipset, which is a single discrete graphics card platform. The M5A97 is the entry-point, it bases itself entirely on what the chipset offers, plus two USB 3.0 ports. Moving up is M5A97 Pro, which has everything its little sibling has, plus a stronger 6+2 phase Digi+ VRM, and two eSATA ports. The M5A97 EVO, which was pictured a little while ago. This has everything the Pro variant has, plus two front-panel USB 3.0 ports, and FireWire.

The second motherboard part of Gigabyte's G1-Killer series apart from the recently detailed G1.Guerrilla is the G1.Assassin. Also an LGA1366 motherboard based on the Intel X58 + ICH10R chipset, the G1.Assassin ropes overclockers into the equation. While the Guerrilla has more in for gamers (and support for up to 3 graphics cards in multi-GPU), the Assassin boasts of a strong CPU VRM, an arsenal of overclocker-friendly features, support for up to four graphics cards in 4-way SLI/CrossFireX, while retaining the gamer-appeal. Unlike Guerrilla, Assassin is an XL-ATX motherboard, retaining the same green+black color scheme.

It features the same 16-phase CPU VRM configuration found on the X58A-UD7 (rev 2.0). The four PCI-Express x16 slots are connected directly to the X58 northbridge, apart from one PCI-E x1 and a PCI. USB 3.0 and SATA 6 Gb/s are standard features here, too. Like the Guerrilla, it features Bigfoot Killer 2100 hardware NIC. The audio, however, is different. While Guerrilla merely uses an HD audio CODEC backed by X-Fi MB software, Assassin uses an actual CA20K2 processor that can perform hardware mixing over OpenAL in Windows 7 and Vista. The audio processor has its own 64 MB of memory, and the Killer NIC reportedly having 1 GB of DDR2 dedicated memory. A rich array of electrolytic capacitors gives the audio a more natural tone. The Assassin is also expected to have overclocking capabilities on par with the X58A-UD7/UD9 leviathans.

Gigabyte's elusive LGA1366 motherboard part of the company's G1-Killer series of motherboards targeting gamers has finally seen the lens. The socket LGA1366 motherboard by Gigabyte is based on the Intel X58 + ICH10R chipset, and is given the brand name G1.Guerrilla. To quickly run you through its styling, "Guerrilla" strikes a chord with a very "jungle warfare" color-scheme, which is black+green. This seems to be the case with the G1.Guerrilla, which goes close to looking like an NVIDIA desktop board.

The CPU is powered by an 8+2 phase VRM, wired to six DDR3 DIMM slots for triple-channel memory; the northbridge heatsink looks like a modular rifle barrel, and the southbridge heatsink like a 5.56 mm magazine. There are three PCI-Express 2.0 x16 slots lending 3-way SLI and CrossFireX support, the usual two-port USB 3.0 + SATA 6 Gb/s duet, but a handful of interesting gamer-specific devices, such as the Killer 2100 hardware NIC, an HD audio CODEC that uses X-Fi MB software but high-grade electrolytic capacitors. The motherboard is out and out a gamers' motherboard. Gigabyte already has motherboards for overclockers which don't look very boutique but do the job, under its existing X58A UD5, UD7, and UD9 models.

Gigabyte's elusive G1-Killer X58 motherboard has quite some task ahead of it, to compete in a nearly-saturated socket LGA1366 motherboard market, including its high-end segment. Merely sporting a black PCB (new and rare for Gigabyte), and an ammo-clip shaped heatsink, and a handful of PCI-E slots isn't going to cut it, well...much. So Gigabyte decided to load the G1-Killer X58 with a Creative X-Fi CA20K2 PCI-Express audio processor, and Bigfoot Networks Killer E2100 network processor with 1 GB of dedicated DDR2 memory.

The CA20K2 from Creative sits at the heart of sound-cards such as the Sound Blaster X-Fi Titanium series, X-Fi Titanium HD, and Auzentech X-Fi Forte. It features 128 hardware channels, and handles the audio stack on-chip when applications and games use OpenAL in Windows Vista or Windows 7. Apart from X-Fi regulars such as CMSS-3D and Crystalizer, the CA20K2 gives you EAX 5.0 HD support. The audio processor is backed by Nighicon high-end audio capacitors which can be found in premium sound-cards. The Killer E2100 ASIC is Bigfoot's high-end PCI-Express network processor that can completely offload the network stack from the CPU. The G1-Killer X58 is expected to be unveiled at CES.

The ASUS Republic of Gamers (ROG) Rampage III Formula brings together numerous features and advantages demanded by contemporary PC gamers. It uses the Intel X58 chipset, enabling support for some of the fastest processors available, including the i7-980X six-core CPU. Rampage III Formula also ships with ROG Connect hardware overclocking, high definition audio, GameFirst bandwidth optimization for online gaming, and a versatile power management scheme that's perfect for performance applications.

ASUS showed of the slightly less expensive ATX sibling of its Republic of Gamers (ROG) Rampage III LGA1366 motherboard series, the Rampage III Formula. The Formula model comes months after the high-end Extreme and M-ATX Gene models, and aims to fill in all the essentials of the ROG series into an overclocker-friendly design. ASUS claims that the Rampage III Formula delivers a "balance of gaming-related features at a superior value." The LGA1366 socket fits all Core i7 processors in the package, including six-core ones out of the box. The CPU is powered by an 8-phase VRM, it is wired to six memory slots for triple-channel DDR3 memory, which are powered by a 4-phase VRM. The board supports DDR3 memory with speeds of up to 2000 MHz.

Expansions slots include three PCI-Express 2.0 x16 (electrical x16, NC, x16; or x16, x8, x8, depending on how they're populated), two PCI-E x1, and one PCI. 3-way NVIDIA SLI and ATI CrossFireX. The ICH10R southbridge gives out six SATA 3 Gb/s ports while an additional controller provides two SATA 6 Gb/s ports. Connectivity includes ASUS SupremeFX X-Fi audio, dual gigabit Ethernet (including one Intel NIC that provides teaming support), two USB 3.0 ports, Bluetooth, and a number of USB 2.0 ports.

Creative Technology Ltd. today announced the Sound Blaster X-Fi MB2 software suite - a powerful audio platform equipped with cutting-edge audio technologies designed to enhance ordinary PC systems limited by only basic onboard audio. The Sound Blaster X-Fi MB2 software suite builds on the success of the original Sound Blaster X-Fi MB, bringing enhancement of onboard PC audio to even greater echelons. Through THX TruStudio Pro audio technology and the latest Creative EAX Advanced HD 5.0, users get to enjoy premium audio quality, effects and features on their PC systems.

Gamers can anticipate being blown away by the amazing realism from the unrivalled headphone surround and gaming sound enhancement technologies delivered by the Sound Blaster X-Fi MB2. Creative EAX Advanced HD 5.0 features state-of-the-art multi-environment rendering and reverb modelling, delivering an ultra-realistic and incredibly immersive 3D gaming experience for powering the next generation of cutting-edge PC games. The additional audio cues provided by EAX can also give gamers a competitive advantage in early detection of enemies.

Creative Technology Ltd. today announced the PCI-E Creative Sound Blaster X-Fi Titanium HD and USB Creative Sound Blaster X-Fi HD, setting the gold standard for PC audio with the first discrete audio card and USB digital audio system to include THX TruStudio PC audio technology.

"The Sound Blaster X-Fi Titanium HD and Sound Blaster X-Fi HD provide the highest quality audio playback of any sound products we have ever introduced, over a period of time where we have sold more than 400 million Sound Blaster cards," said Steve Erickson, Vice President and General Manager of Audio and Video at Creative. "We are thrilled to announce that our newest additions to the Sound Blaster line include THX TruStudio PC audio technology, bringing together two of the most respected names in sound quality to provide an unparalleled audio experience on the PC."

Auzentech, Inc today announced the immediate release of the Auzen X-Fi Bravura 7.1 sound card, a full-height, custom designed PCI Express sound card built around the Creative PCI Express audio processor. The Auzen X-Fi Bravura 7.1 promises "breathtaking" audio for music and movies with DTS Neo:PC & DTS Interactive. And when it's time to unwind with your favorite PC Game, you won't be left behind with EAX 4.0.

Below are the Auzen X-Fi Bravura 7.1 sound card Key Features, Innovations, and some inside information on how Auzentech designed the card for optimal performance with both Digital and Analog audio.

Creative Technology Ltd. today unveiled the Creative Sound Blaster Arena Surround USB Gaming Headset, a cutting-edge, all-in-one gaming headset powered by renowned Sound Blaster X-Fi technology, and also announced the availability of the Creative Fatal1ty Professional Series Gaming Headset MkII. Designed with the rigorous needs of gamers in mind, both headsets provide the ultimate gaming experience for those serious about immersing themselves in the game.

Creative Technology Ltd. today announced the Creative Sound Blaster Wireless for iTunes, a breakthrough for more than 100 million people who listen to iTunes music and Internet radio on their PC or Mac. The Creative Sound Blaster Wireless for iTunes upgrades the PC or Mac to a premium wireless sound system that enables users to use the iTunes interface. It is about the size of a thumb drive, and it just plugs into the USB connection on the PC - it is as easy to use as iTunes itself. The Creative Sound Blaster Wireless for iTunes is the perfect solution for everyone who has iTunes on their PC or Mac, allowing them to listen to their music wirelessly and enhancing the quality of the playback.

Coupled with a Creative Wireless Receiver, the Creative Sound Blaster Wireless for iTunes allows users to wirelessly connect the PC or Mac to speakers or headphones when they listen to their iTunes or MP3 music. Users no longer have to connect speakers or headphones directly to their PC or Mac, because it plays back music wirelessly throughout the home. Now users can take their notebook PC or Mac from one room to another while they listen to iTunes music without skipping a beat. The Creative Sound Blaster Wireless for iTunes enables users to select up to four specific rooms where they want to wirelessly play back their music or they can broadcast to unlimited systems throughout the home.

The newest entry into ASUS' already huge lineup of socket LGA-1156 motherboards based on the Intel P55 chipset, is the new Republic of Gamers Maximus III Gene. Unlike the Maximus III Formula, this one is based on the micro-ATX form-factor, with four expansion slots in all, to spare. The LGA-1156 socket is powered by a high-grade 10-phase digital PWM circuit. It is wired to four DDR3 DIMM slots for dual-channel memory. With two PCI-Express 2.0 x16 slots (electically dual x8 when both populated) wired to the CPU, the board utilizes the feature-set of the P55 PCH completely. An open-ended PCI-E x4 is located between the two x16 slots, and a legacy PCI slot below. Connectivity includes gigabit Ethernet, Firewire, USB, eSATA, and 8-channel ASUS SupremeFX X-Fi, implemented in the same way as on Rampage II Gene and Maximus II Gene. The ASUS Maximus III Gene motherboard is expected to start selling by the end of this month, its pricing is yet to be known.

Auzentech, Inc. announced shipment dates today for the highly-anticipated X-Fi HomeTheater HD sound card. Reviewer shipments of the X-Fi HomeTheater HD will begin the second week of July. According to Auzentech the sound card will also go into full production at that time, enabling customer shipments to begin at the end of July.

"We are excited to officially announce shipment dates of the X-Fi HomeTheater HD sound card," said Stephane Bae, president of Auzentech, Inc. "We appreciate the patience of all our customers, distributors, and dealers who have waited anxiously for this sound card."

Auzentech announced today the immediately availability of the X-Fi Titanium I/O Drive for purchase from the Auzentech Online Store. According to the Auzentech website, the X-Fi Titanium I/O Drive is "the ideal way to harness the power of connectivity for select Auzentech PCI Express X-Fi Sound Cards. With the ability to go straight to gaming mode with the push of a button, Headset Connectivity, volume controls and the ability to record your own music, the I/O drive expands your system with a wealth of options."

ASUS, the world's leading producer of motherboards, today put world record-breaking power into the hands of AMD Phenom II users with the launch of the ROG (Republic of Gamers) Crosshair III Formula. Based on the AMD Socket AM3 platform, the Crosshair III Formula harnesses its full complement of ROG-exclusive features and technologies to unleash the full overclocking potential of Phenom II processors-enabling budget-conscious enthusiasts and gamers to enjoy extreme levels of performance at an affordable mid-price point.

MSI, the worldwide high-end graphics card and professional motherboard brand-manufacturer, today proudly announced a new series of audio products - Syren series. As the name, the dreaming sound of Syren can hypnotize every person that she wants to. The person who is hypnotized can't help falling in the dreaming sound, feeling comfortable and satisfied. This is the most important feature of Syren series: "dreaming sound." The latest Syren series products include "SyrenSound X-Fi" high-end sound card, "SyrenPhone Gaming" professional gaming Headphone, and "SyrenSpeaker mini" Mini-Q speaker, targeting the user who seeks for pure and clear sound.

GIGABYTE Technology CO., LTD., a leading manufacturer of motherboards and graphics cards, today is pleased to announce GIGABYTE X58/P45/P43/P41 series motherboards now support Creative's latest Sound Blaster X-Fi technologies, delivering a premium audio quality and listening experience for your PC.

X-Fi Xtreme Fidelity is the new audio standard from Creative that makes your music and movies way better. It breathes life into songs, restores detail, and expands the music to surround sound. For music lovers or gamers, X-Fi technology delivers superior 3D audio solutions. At the heart of X-Fi Xtreme Fidelity lie three key technologies; X-Fi CMSS-3D Virtual, X-Fi Crystalizer and EAX ADVANCED HD 4.0.