Zalman unveiled a trio of entry-thru-mid range PSUs for gaming PC builds, the 500W ZM500-GT, the 600W ZM600-GT, and the 700W ZM700-GT. The three feature uneventful fixed cabling, but offer 80 Plus efficiency. These PSUs feature two-forward switching circuit designs, are ATX v2.3 compliant, and conform to ErP 2010 Lot 6 power-draw standards (<1W standby power).

The ZM500-GT features a dual +12V rail design (each rail 18A), while the ZM500-GT and ZM600-GT feature quad +12V rail (each 18A) design. Internally, the GT series PSUs feature +5Vsb green IC, active PFC, and a secondary protection IC. The units are cooled by a 120 mm temperature-controlled fan. The ZM500-GT is 80 Plus compliant, while the ZM600-GT and ZM700-GT are 80 Plus Bronze compliant. According to the source, the ZM500-GT will be priced around $80, the ZM600-GT around $100, and the ZM700-GT around $125.

South Korean company Zalman has now introduced two new 'high performance' PC cases, the Z11 and Z11 Plus mid-towers. These models measure 260 (W) x 498 (H) x 525 (D) mm, they weight 7.3 kg, and have a steel structure, a black paint job, and support for ATX and micro ATX motherboards, as well as for graphics cards up to 290 mm long.

Zalman's cases feature four exposed 5.25-inch bays, one 2.5-inch bay, five 3.5-inch drive trays with tool-free mounting, an acrylic side window, an anti-vibration rubber stand for the PSU, two pre-drilled holes for watercooling tubes, and four fans - one 120 mm spinner with blue LEDs in front, another one on top, a LED-less 120 mm model at the back, and two 80 mm fans on the side.

The Zalman Z11 includes an I/O panel with four USB 2.0 ports and has a recommended price tag of 69.90 Euro, while the Z11 Plus offers two USB 2.0 and two USB 3.0 ports, and costs 79.90 Euro. Both are expected to become available in about two weeks.

Zalman released ZM-OC2011, a retention kit upgrade for WB5 and WB5 Plus water-blocks to support Intel's latest LGA2011 socket, on which Intel's "Sandy Bridge-E" Core i7 and Core i7 Extreme Edition processors are based. The kit consists of brackets that let you use the mount-hole spacing of all previous Intel LGA sockets, including LGA775, LGA1366, LGA1155/1156; nuts and bolts. In Japan it is priced at around $19.

Zalman started selling its AMP1000 aluminum-rubber mousepad. This mousepad uses a combination of anodized aluminum and rubber as its primary material. Its surface is optimized for all kinds of mice with resolutions well over 1000 dpi. Its surface has a smooth matte-black finish, and should present a balance between speed and control. A shiny chrome line frames it. The AMP1000 makes zero use of fabrics, and hence is spill-resistant. The AMP1000 measures 210(W) x 297(H) x 3(D) mm, weighing 668 g. Although its base is rubberized, the AMP1000 has rubber feet for additional grip with the surface below. The AMP1000 has reached Japanese stores, priced at 3,800 JPY, or about US $49.

Zalman's newest line of solid state drives, the F1-series, started selling in Japan. These drives are slated for launch tomorrow. These drives are a typical implementation of the SandForce SF-2281 controller, backed by MLC NAND flash memory. The F1-series is available in three sizes, 60 GB, 120 GB, and 240 GB; priced at 11,980 JPY (US $153), 19,800 JPY ($254), and 39,980 JPY ($513), respectively. The drives take advantage of the SATA 6 Gb/s interface, and are built in the 2.5-inch form-factor. The drives offer read speeds of up to 560 MB/s, and up to 530 MB/s writes. The 60 GB and 120 GB models offer 4K random write performance of 30,000 IOPS, while the 240 GB one offers 45,000 IOPS.

Announced earlier this month, Zalman's CNPS10X Optima CPU cooler has started to pop up in store listings as a pre-order item. Set for a January arrival, this new tower cooler makes use of Direct Touch Heatpipe (DTH) technology and comes with support for Intel LGA 1155 / 1156 / 1366 / 775 and AMD AMD Socket FM1 / AM3+ / AM3 / AM2+ / AM2 processors.

Zalman's creation measures 132 (L) x 85 (W) x 152 (H) mm, it weights 630 grams, and has four copper heatpipes, aluminum fins, and one 120 mm FSB (Fluid Shield Bearing) fan which features Shark Fin blades (for increased airflow and lower noise & vibration) and operates at 1,000 to 1,700 RPM (sound output is 17 to 28 dBA).

The CNPS10X Optima is bundled with a pinch of ZM-STG2M thermal grease and can be found priced as low as 22.76 Euro.

Earlier this month, we learned that Korean PC cooling solutions expert Zalman was entering the graphics card market. At the time we could only see AMD Radeon graphics cards, those too, re-branded HIS Radeon graphics cards. We're now seeing the first true Zalman graphics cards, that implement Zalman's generations of expertise with VGA cooling. Pictured below are Zalman's HD 6700, HD 6800; and NVIDIA GeForce GTX 560 Ti graphics card designs that implement Zalman-made VGA coolers. This also confirms that Zalman will be a neutral board partner, selling both AMD Radeon and NVIDIA GeForce. Zalman will show off its graphics cards at the upcoming CES event.

Zalman took its first dip into water cooling after a while, with the CNPS20LQ, a self-contained (closed loop) CPU cooler. Designed and made originally by Asetek, a well-established brand name in OEM water cooling solutions, the CNPS20LQ uses a single-fan (dual-fan capable) radiator design. Its radiator measures 120 (W) x 158 (L) x 25 (H) mm. The radiator houses a small reservoir. The block houses a pump, which draws power from standard 4-pin CPU power header, and supports PWM control. The two are connected by flexible tubing. The block features a copper base with pre-applied thermal interface material. The CNPS20LQ supports all current socket types, including Intel LGA2011, LGA1155/1156, LGA1366, LGA775; AMD AM3+, FM1, and AM3/AM2+/AM2. It is priced at €69.90.

Korean company Zalman, known more for its innovative PC air cooling solutions, PSUs, and cases, entered the graphics card business. The company is now an AMD Radeon add-in board (AIB) partner, and started its lineup off with some upper-mainstream models. It makes perfect sense for Zalman to enter this business, as it holds some expertise with high-end graphics card cooling solutions. Zalman can source PCBs from any of the major foundries such as PC Partner, Hightech Information Systems, or TUL, and assemble its coolers on top of them. Zalman's first three graphics cards are based on Radeon HD 6870, HD 6850, and HD 6770, with AMD reference clock speeds. What markets Zalman will target its new graphics card lineup with, is not known.

Zalman announced its latest high-end CPU air cooler, the CNPS12X. This beast was first shown to public at this year's Computex trade-show, back in early June. Between then and now, the CNPS12X got some important retention module changes that make it fully compatible with the upcoming LGA2011 socket on which "Sandy Bridge-E" Core i7 processors are based, as well as AMD AM3+ and FM1. Measuring 151 x 132 x 154 mm (L x W x H), and weighing exactly 1 kg, the CNPS12X uses a design that's essentially identical to that of the NH-D14 from Noctua, that of two fin stacks. It's just that the stacks here are somewhat circular in shape, and that the CNPS12X uses three fans: an intake (before the first stack), a conveyer (between the two stacks), and an exhaust (after the second stack). All three fans are 120 mm in size, and are illuminated by blue LEDs.

The fans seem to be using 3-pin (voltage) method of speed control. Supplied with the cooler are three RC5 intermediate resistors, which make the fans spin at speeds between 850 and 1100 RPM with as low as 22 dBA noise output. Without the RC5, the fans spin between 950 and 1200 RPM, with at least 24 dBA noise output. The heatsink is made almost entirely of dark nickel-plated copper, with certain aluminum parts. Heat is conveyed to the two copper fin stacks by six nickel-plated copper heat pipes, that make direct contact with the CPU at base. Zalman did not give out pricing and availability information.

HIS released its latest mainstream graphics card, the HIS HD 6670 iSilence4. As the name suggests, this is a silent (fanless) graphics card based on the Radeon HD 6670 graphics processor. The card's design is based around Zalman's VNF100 GPU heatsink that provides passive cooling to the GPU, the DDR3 memory and simple FET configuration VRM fend for themselves. VNF100 features a variable fin profile design, that works to improve heat dissipation efficiency.

On the obverse side of the PCB, there is just the base of the heatsink, from here, heat is conveyed to the main portion of the heatsink that's over the reverse side of the PCB, using three heat pipes. The Radeon HD 6670 GPU is built on the 40 nm process, is DirectX 11 compliant, packs 480 stream processors, and features a 128-bit wide memory interface. On this card, 1 GB of AMD-branded DDR3 memory is used. The GPU is clocked at 800 MHz, and the memory at 1600 MHz DDR (25.6 GB/s bandwidth). Display outputs include one each of DVI, D-Sub, and HDMI. The card relies entirely on the PCI-Express slot for power. HIS did not give out pricing details.

Here are the first pictures of CNPS12X, Zalman's new top-tier CPU cooler. Zalman is popular for its omega-shaped aluminum fin ring coolers that were counted among the best in the business for the better part of last decade, before tower-type coolers took over. Tower-type coolers offer the best cooling efficiency to the weight. The only way so far to better tower-type air-coolers in their category is double-tower type, where heat pipes pass through two aluminum fin towers, with two or three fans nested in between, in coolers such as the Noctua NH-D14 and Coolink Corator DS. Zalman made its first tower-type cooler with CNPS10X, and later implemented the design a number of times over, on CNPS11X, CNPS5X, and CNPS7X.

The CNPS12X is a faint tribute to the round fin-ring design heatsink, except that it's not. It is a double-tower type heatsink, with ring-like aluminum fin stacks. Unlike with true ring-type heatsinks where fins would propagate along the main heat pipes, on CNPS12X, they pass straight upwards from the base. The heat pipes pass through the first fin stack, through a base where they make direct contact with the CPU, and then on through the second fin stack. The cooler comes with three fans pre-installed, one at the intake, one between the two fin stacks, and one at the exhaust. The heatsink is large, at 151 (L) x 132 x 153 mm, weighing in at 1.00 kg.

Zalman is making changes to its VF3000F GPU fan-heatsink, to give it compatibility with NVIDIA GeForce GTX 570 and GTX 580. The heatsink is largely unchanged from the Fermi-ready one introduced back in September 2010, with only a few minor compatibility tweaks. The new variant still measures 239 (L) x 98 (W) x 51 (H) mm, weighing 430 g. It uses two green LED-illuminated 92 mm fans that spin at 1400-3000 RPM, featuring EBR bearing.

The VF300F is essentially a large aluminum fin array to which heat is conveyed by five 6 mm thick copper heat pipes. The heat pipes converge at a large copper base. The heatsink is ventilated by the two 92 mm fans, and is topped off with a green chrome cooler shroud. A syringe of ZM-STG2 TIM is bundled. The new VF3000F is expected to be priced on par with the older model, €40 - €45.

A new CPU Cooler lineup has just been released to bring up the Zalman to the next stage. Unlike its predecessors, CNPS11X Extreme comes with the unique V-shape heatsink from any other manufacturers. With a highly optimized thermal designed heatsink will be certainly outperforming than any other heatsink in the market.

On top, with its stylish Black pearl plating with Blue LED will add more visuals for the Case modders. In addition, by Zalman's unique Composite Heatpipe Solution, CNPS11X Extreme will have more than enough to cool any hottest CPUs in the market as well. (Up to 350W TDP). Included ZM-STG2 will also boost up to the maximum cooling performance of CNPS11X.

Zalman is pleased to introduce its brand new USB3.0 External H.D.D. enclosure series. New ZM-HE250 U3, ZM-HE350 U3 and ZM-HE350 U3E will make even largest files transfer possible with Ultra fast speed of 5Gbps. As long as Motherboard supports USB3.0, then you can enjoy the cutting edge USB3.0 Speed with these new External H.D.D. Enclosures. In addition, elegant design looks would differentiate them from existing products in the market. Apart from these new models, we will also release ZM-PC302 U3 PCI-e card to sever many users without USB3.0 port on their system. Regardless of any system you have, once it has PCI-e 1X slot, you just install our ZM-PC302 U3 on to your system to boost up your file transfer rate with ZM-HE250 U3/ HE350 U3/ HE350 U3E.

Zalman rolled out the ZM-F4, a 135 mm case fan that features a 120 mm compatible frame that lets it fit into most 120 mm case fan mounts and CPU heatsinks. Capable of 900 to 1,300 RPM rotational speeds, the ZM-F4 has rated noise levels of 18 to 26 dBA. The advanced sleeve bearing is said to ensure a life-span of 50,000 hours. The fan uses standard 3-pin power input, a bundled resistor cable keeps the fan down to its minimum speed ensuring low noise output. Zalman also opted for rubber pins instead of metal screws to bundle with its fan. Pricing and availability is not known.

Zalman announced its first external HDD enclosure. Unlike any other External HDD enclosures, we have spiced it up with world's first virtual drive function on ZM-VE200. Now, end users do not need to carry around uncomfortable CD/DVDs. All they need to do is simply extract ISO image from the CD/DVDs and store them in the ZM-VE200. ZM-VE200 comes with the LCD that displays the list of the ISO files that have been loaded. Then they can install various OS / software by user's choice with faster USB connection. Also with its stylish slim design will definitely attract customers to take anywhere they go.

Zalman's pack of new CPU coolers is led by the CNPS11X Extreme. The 11K is positioned to be a premium air-cooler that's a notch above even the CNPS10X. Overall retaining the trapezoid shape of the CNPS7X, the CNPS11X Extreme actually uses what appears to be L-shaped (right-angled) aluminum fins packed into a very dense fin array. It is cooled by a high-flow 130 mm LED-lit fan. It is capable of handling thermal loads of up to 350W, supporting all modern socket types, including AM3(+)/AM2(+), LGA1366, LGA1155/LGA1156.

Zalman showed off its latest mid-range CPU cooler, the CNPS7X LED. The CNPS7X sits between the value CNPS5X and the high-performance CNPS10X. It uses an aluminum fin tower design, making use of trapezoid aluminum fins to which heat is conveyed by three 8 mm thick copper heat pipes. It makes use of an LED-lit 130 mm high-flow fan. The CNPS7X is suited for all modern socket types, including AM3+/AM3/AM2+, LGA1366, LGA1155/LGA1156, and LGA775.

Zalman pleased to inform that the GS1200 is now available for order. Its mesh design with two large 200mm fan provided delivers powerful cooling and excellent air flow at once. On top, to maximize user's convenience and faster data transfer, front USB3.0 port is adopted. Top cover HDD Docking deck which makes convenient addition of the HDDs possible is another ideal feature of this new generation case to satisfy enthusiast's requirement.

Zalman announced its latest CPU cooler, the CNPS5X. Its design is a fusion between traditional tower-type and Zalman's own nested fan design heatsink. The CNPS5X is designed for medium-thru-heavy thermal loads, more like highly overclocked dual-core or mildly overclocked quad-core chips. The company excluded support for LGA1366 for this reason, but added support for Intel's upcoming LGA1155 socket. Other sockets supported include LGA1156, LGA775, and AM3/AM2+/AM2.

Its design consists of Y-shaped aluminum fins, to which heat is conveyed evenly by three 8 mm thick copper heat pipes. The heat pipes converge at a copper CPU base. The 92 mm fan is nested inside the aluminum fins. It spins at 1400~2800 rpm, with a rated noise level of 20~32 dBA. Together, the CNPS5X measures 127(L) x 62(W) x 134(H) mm, weighing 320 g. Installation is made easy by push-pins for Intel sockets, and a fixed clip for AMD sockets, requiring no access to the back of the motherboard. Slated for market release in December, the CNPS5X from Zalman is priced at €26.90.

Zalman is pleased to inform that the new revolutionary 80 Plus Silver certified High End Power supply is now available. From its predecessor, the power efficiency has been increased up to 87% for the excellent performance (80 Plus SILVER certified) without any additional price increase.

The newly designed heatpipe block enhances cooling efficiency and minimize noise level by utilizing Zalman's unique noise prevention technologies. Furthermore all new PCB Layout provides users with highly effective energy usage with least energy loss. So, enjoy all benefits provided by Zalman with maximized performance in minimized noise.

Zalman is pleased to inform you that Z9 series is now ready to go. This awesome featured Z9 series will continue the line-up of Z7 series. The new Mid Tower Enclosure comes with a lot of user- friendly functions and features will serve end-users chasing great value product in affordable price.

Zalman made its entry into the solid state drive (SSD) business by unveiling two lines of SATA SSDs in the 2.5 inch form factor. It includes the value-oriented S-series, and the performance-oriented N-series. Available in 32 GB, 64 GB, and 128 GB, the S-series models make use of a JMicron controller with up to 260 MB/s of read speeds, and 60 MB/s writes for the 32 GB model, 120 MB/s writes for the 64 GB one, and 210 MB/s for the 128 GB one. The Zalman S-series 32 GB, 64 GB, and 128 GB SSDs are expected to be priced at US $99, $149, and $249, respectively. These drives do support the TRIM function.

The N-series SSDs make use of a SandForce SF-12xx controller, with sequential read speeds of up to 280 MB/s and 270 MB/s writes, consistent for both the 64 GB and 128 GB models. The N-series 64 GB model is priced at $169, and 128 GB model at $289.

Chinese graphics card manufacturer ColorFire designed a new non-reference design AMD Radeon HD 6850 graphics card that that uses a stronger VRM and a Zalman VF-3000 GPU cooler. The PCB sets the red color-scheme, and the cooler keeps up with it, using a hot rod looking shroud. The card uses a 7+1 phase VRM that draws power from two 6-pin power connectors, facilitating high clock speeds. The PCB also holds two CFBI fingers, indicating the card to support 3-way and 4-way CrossFireX. Low-latency (0.5 ns) GDDR5 memory chips by Hynix are used.

The VF-3000 has some hefty credentials, it can handle very high thermal loads. The cooler makes use of a dense aluminum fin array that is ventilated by two 90 mm fans. The exact clock speeds are not known. Display connectivity includes one each of DVI, D-Sub, HDMI 1.4, and DisplayPort 1.2. Like every other HD 6850, this one packs 960 stream processors, and supports the latest graphics APIs such as DirectX 11 and OpenGL 4.x. It's not known if ColorFire will market this card outside China.