In Win today rolled out the SR24, an all-in-one liquid CPU cooler featuring a patented "twin turbine pump" feature. These are basically two pump turbines attached on both ends of the DC motor's shaft, which in turn are located on either ends of the CPU block. One of the turbine pushes coolant into the block, while the other pulls heated coolant from it. In Win claims that even if one of the two fails over time, the other will provide sufficient coolant pressure to cool your CPU, while a warning LED lights up. With both turbines operational, the SR24 offers double the coolant pressure, and a markedly superior P-Q curve. The pump block is capped off with an RGB illuminated In Win logo.

The innovative pump-block of the In Win SR24 is tubed to a 240 mm x 120 mm aluminium radiator. Ventilating it are a pair of included In Win Jupiter 120 mm fans that each spin at speeds of 500 to 2,500 RPM, with up to 101.5 CFM of air-flow, and as low as 23 dBA of noise output. The fans feature double ball bearings and feature addressable RGB LEDs in their hubs. A single 3-pin ARGB connection handles lighting for the two fans and the pump-block. The company didn't mention thermal load numbers, but among the CPU socket types supported are TR4, sTRX4, LGA2066, AM4, and LGA115x. The company didn't reveal pricing.

FSP, the world leading manufacturer of PC power supplies, is delighted to announce its new stylishly innovative T-WINGS (CMT710) PC chassis. The new T-WINGS chassis offers users the ability to combine two high-end PC systems into a single chassis. By housing two high-end systems into a single chassis, the T-WINGS save users space at home or in the office and can greatly speed up productivity. The main system supports up to EATX motherboard sizes for extreme gaming workstations and HEDT systems, while the sub-system supports Mini-ITX motherboards that offers a wide range of capabilities.

The benefits of this design include running two systems simultaneously, which frees up the systems from any lags, delays, or any excess loads that might cause system crashes. Content creators and streamers will benefit from this setup, which will allow them to record without interruptions, continually monitor and control the status of their recordings, and allow them to interact with their fans with ease.

SilentiumPC, the European manufacturer of CPU coolers and PC cases, presents the Astrum AT6V series, a new member of its case family aimed at gamers with high ambitions. The Astrum AR6V series stands out thanks to its eye-catching design, but also for its inner strengths. One of the series' particular strengths is the sophisticated Natissis two-chamber internal structure, which offers maximum compatibility and supports an exceptionally wide range of component choices.

The large mesh front combined with the four pre-installed 120 mm fans ensure excellent air circulation inside the case. The series consists of the basic model Astrum AT6V TG and the top-of-the-line model Astrum AT6V TG ARGB. In the latter, the tempered glass side panel comes with the novel edge lit addressable RGB lighting feature, and premium 120 mm fans with built-in ARGB LEDs. Thanks to the cutting-edge features and refinements, Astrum AR6V series is able to meet the high expectations and demands of ambitious gamers.

ZALMAN today announced market availability of its new CNPS16X tower-type CPU cooler and three new STC-series thermal compounds. The CNPS16X features an aluminium fin-stack tower-type heatsink that's ventilated by a pair of 120 mm fans in push-pull configuration, held together by an ABS shroud. The top-plate of this shroud features an addressable RGB embellishment with the ZALMAN logo at the center. Besides this, both fans feature ARGB diffusers along the bore of their frames. ZALMAN has two color variants of the CNPS16X depending on the color of the shroud - black and white. Splitter cables are included so the ARGB connections of both fans and the shroud are combined to a single 3-pin connection.

The design of the CNPS16X involves a direct-touch heatpipe base, from which four 6 mm-thick nickel-plated copper heat pipes pull heat, spreading it through the aluminium fin-stack. This stack features wave-shaped fins that make hexagonal patterns when viewed from the side. This design helps with increasing turbulence and heat-dissipation to the air-flow. Each of the two included 120 mm fans takes in 4-pin PWM, spins up to 1,500 RPM, together pushing around 75-90 m³h of air, with 25-29 dBA of noise output. ZALMAN rates the thermal capacity of this cooler at 150 W. Among the CPU socket types supported are AM4, LGA115x, and LGA2066. The CNPS16X is priced at 59.90€ (including taxes).

The European manufacturer of CPU coolers and PC cases, SilentiumPC, presents the successor of its popular Armis AR5 case series. The new Armis AR6 lineup is aimed at gamers looking for a PC case with maximum versatility and stylish design combined with outstanding value for money. SilentiumPC has developed three different versions of the case for this purpose, which are identical in terms of their internal construction, but differ in their exterior and (A)RGB lighting. All models are designed for excellent internal ventilation and implement the new Natissis internal structure with dual-chamber layout. The Armis AR6X TG RGB and Armis AR6X EVO TG ARGB are supplied directly with total of five 120 mm fans, the Armis AR6Q EVO TG ARGB with two 120 mm fans.

The Natissis internal structure, recently introduced in the Regnum RG6V case series, has been incorporated in the new Armis AR6 series. It utilizes the dual-chamber design which has been perfected by SilentiumPC, providing outstanding flexibility when it comes to the choice of components for high performance systems and offering outstanding cable management.

One of the emerging trends with tempered glass front faces is the option to have a metal mesh front panel that serves as an airy intake, as more PC builders opt to install radiators there. The MATREXX 55 Mesh 4F from DeepCool follows this trend, and loses the prominent tempered glass front facade to a black mesh intake over the three 120 mm fan mounts. The rest of its design is identical to that of the original. A tinted tempered glass panel continues to dominate the left side. Behind it is a conventional horizontally-partitioned layout. The bottom compartment has room for two 3.5-inch drive bays, Two additional 2.5-inch drives can be mounted along the motherboard tray, which has room for graphics cards up to 37 cm in length, and CPU coolers up to 16.8 cm in height. DeepCool is including four 120 mm fans that have addressable RGB LED illumination; three of which are factory-fitted along the front intakes, and one at the rear exhaust. The company didn't reveal pricing.

Cooler Master, a global leader in designing and manufacturing innovative computer components introduces the MasterAir G200P Low Profile CPU cooler and the MasterFan MF120 Halo ARGB case fans. The MasterAir G200P is a 39.4 mm low-profile CPU cooler designed for small form factor cases and compact PC builds. Built with a powerful 92 mm squared PWM fan to maximize top-down cooling, the G200P features a wide fan speed range that is fine-tuned for maximum airflow, overall cooling performance and silent operation.

The MasterFan MF120 Halo provides an Ideal air-cooling solution for CPU coolers and chassis in-take fans. Built with Air Balance fan blades, the fan includes multiple layers of noise reduction technology that cools components in silence. Featuring dual loop addressable RGB lighting, the MF120 Halo exudes vibrant colors while generating high-pressure airflow.

NZXT, a leading developer of software-powered hardware solutions for PC gaming, today announces the NZXT RGB & Fan Controller. Powered by NZXT CAM, the RGB & Fan Controller gives users the tools to customize lighting and fan profiles to perfection.

The NZXT RGB & Fan Controller was created for builders to easily and affordably add digital RGB and fan control to their system controlled via NZXT CAM. Any chassis can now have the same enhanced capabilities found in the i versions of NZXT award-winning H Series cases. Bringing beauty to any battlestation is simpler than ever with two RGB lighting and fan channels that are compatible with all NZXT lighting accessories such as LED strips, underglow, cable combs, and AER RGB 2 fans. Additionally, three dedicated 10 W fan channels are included, giving users direct control of their airflow performance digitally.

Thermaltake, the leading premium brand of DIY PC components for Cooling, Gaming Gear and Enthusiast Memory solutions has announced Riing Quad 12 RGB Radiator Fan and Riing Quad 14 RGB Radiator Fan, the world's first 16.8 million 4-ring design radiator fan with 54 addressable RGB LEDs. Supports NeonMaker Light Editing Software and TT RGB PLUS Software, up to 20 of Riing Quad RGB Radiator Fan can be controlled at the same time.

The Riing Quad works with Amazon Alexa and can Sync with Razer Chroma Lighting as well as Thermaltake AI Voice Control. With a 9-Blade High-Airflow design, the Riing Quad utilizes 120 mm and 140 mm high-static pressure blade design, long-life hydraulic bearing and a PWM controlled motor to deliver remarkable acoustic and cooling performance to elevate the aesthetics of custom PC build.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear and Enthusiast Memory solutions, today announced the release of the Floe RC360 / RC240 ARGB all in one liquid CPU & RAM cooler kit, the first in the industry to combine RAM with AIO liquid cooling, which is compatible with Thermaltake memory modules (Sold separately). Thermaltake took a leap on exploring more possibilities for providing a powerful cooling solution for memory modules.

Floe RC360 / RC240 ARGB all in one liquid CPU & RAM cooler kit allows users to maximize their overclocking performance, granting users the ability to equip a high-quality all-in-one cooling system including a water block, radiator, an ARGB controller, 3 airflow 120 mm fans on the RC360 version and 2 airflow 120 mm fans on the RC240 version. This provides the user with superior cooling performance, longer lifespan and stability.

CORSAIR, a world leader in high-performance gaming peripherals and enthusiast components, today launched a range of new additions to its lineup of high-performance CPU coolers, able to handle the rising temperature demands of increasingly powerful desktop processors. The A500 Dual Fan CPU Cooler utilizes a quad direct-contact heat pipe design for ultra-high heat dispersion, with a unique slide-and-lock fan mount system to adjust fan height. The iCUE RGB PRO XT Series is the latest family of CORSAIR's renowned all-in-one liquid CPU coolers, combining powerful and quiet cooling with dynamic RGB lighting in radiator sizes up to 360 mm, capable of taming the high temps of even the most thermally intensive CPUs such as the recently released 3rd Gen AMD Ryzen Threadripper Series.

The A500 Dual Fan CPU Cooler is a high-performance air cooler, combining low-noise operation with dark styling and an innovative fan mounting system. Able to cool CPUs up to 250 W TDP, the A500 is equipped with four direct-contact heat pipes and two CORSAIR ML120 magnetic levitation bearing fans, controllable via PWM for precise adjustment of fan speeds between 400 RPM and 2,400 RPM. The fans sit within a ratcheting slide-and-lock fan mount, allowing for a variable fan height to accommodate a wide range of DRAM. The A500 is easy to install and stays firmly in place thanks to the CORSAIR HoldFast retention system, and is compatible with AM4, AM3, FM2, LGA115x, and LGA20xx CPUs.

iBUYPOWER, a leading manufacturer of custom gaming PCs, today announced the expansion of its signature Element case line. The Element CL will be designed for easy integration of hardline custom cooling curated for pre-built systems while the Element Dual will provide users with ample thermal support and a clean internal layout for both pre-built systems and DIY enthusiasts.

Element Dual
For a different take on the traditional PC layout, the iBUYPOWER Element Dual features a binary chamber design. With the PSU mounted vertically on the bottom right side of the case and hidden behind the motherboard tray, users will be left with an open aesthetic on the left side and substantial space for maximum component compatibility; including: E-ATX and ATX motherboards, up to 400 mm GPUs and 155 mm CPU air coolers.

ID-COOLING today announced SE-234-ARGB CPU air cooler, featuring Addressable RGB Lighting on both the heatsink top cover and fan, 4 direct-touch copper heatpipes, 120 mm PWM fan and newly designed metal-mecha mounting system. This cooler is designed to cool those processors with a TDP under 200 W. With a dimension of 126x88x154mm, this cooler is basically compatible with all regular ATX cases. The whole heatsink body has a black coating for stealthy looking.

Both the top cover and fan has addressable RGB lighting. Their ARGB cables are connected into one header, which can then be connected to motherboard 5 V 3-pin ARGB header from ASUS Aura, MSI Mystic Lighting, Gigabyte RGB Fusion and AsRock Polychrome Sync. For non ARGB motherboard users, there's an internal cable controller for multiple RGB lighting effect.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear and Enthusiast Memory solutions, today announced the release of the Thermaltake TOUGHRAM Z-ONE RGB DDR4 Memory Kit 3,200 MHz, which is supported by Intel and AMD platforms. Featuring 10-layer PCB construction for enhanced performance and stability, the TOUGHRAM Z-ONE RGB is equipped with high-performance components including tightly-selected memory chips, 2oz copper inner layer for enhanced electrical conduction, and 10μ gold fingers for high resistance ensuring ultimate gaming performance.

Furthermore, the TOUGHRAM Z-ONE RGB memory can be controlled by our software to monitor the real-time temperatures, frequency and performance and create stunning lighting effects with over 25 lighting modes. Users can also sync with TT RGB PLUS to maximize unique settings for their RGB color theme. Synchronize TT RGB PLUS, TT AI Voice Control, Razer Chroma, and Amazon Alexa RGB with TOUGHRAM Z-ONE RGB, users can build their own ecosystem with 10 super-bright addressable LEDs for stunning 16.8M RGB illumination. The TOUGHRAM Z-ONE RGB also support motherboards that have 5 V addressable RGB headers - ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and ASRock Polychrome.

Akasa are proud to announce partnership with Razer, a leading global gamer's lifestyle brand, for its flagship and award-winning lighting technology: Razer Chroma.

Enabling Akasa's array of addressable RGB products to sync with Razer Chroma brings the full-spectrum of vivid RGB to your build. Taking full advantage of the Razer Chroma software platform and Akasa's addressable RGB devices such as the new Vegas TLY cooling fan and Dual M.2 PCIe SSD adapter with RGB LED light and heatsink, gamers can truly immerse themselves in popular games. Syncing individually addressable LED nodes adds RGB vibrancy and ambience to gamer's systems and surroundings for epic gaming experiences.

Thermaltake, a leading premium gaming tower manufacturer, is thrilled to announce a new compact design case line up- the H550 TG ARGB Edition Mid-Tower Chassis from H Series chassis which is famous for its eye-catching RGB light strip incorporated at the front. The H550 TG ARGB's dedicated diamond cut angles around the 2 mm aluminium front panel makes this case unique and incomparable. The front ARGB light strip and one preinstalled rear 120 mm ARGB fan can be controlled via motherboard synchronization software or the RGB switch on the top I/O port for ultimate lighting effects. Other outstanding features include a 4 mm tempered glass panel, a riser GPU support bracket, and removable magnetic filters for overall exceptional PC performance which is the ideal PC case for both gamers and enthusiasts.

CORSAIR, a world leader in PC gaming peripherals and enthusiast components, today announced the launch of the new CORSAIR iCUE LS100 Smart Lighting Strips, the first in a new ecosystem of iCUE-powered ambient RGB lighting products that vastly expand the possibilities of synchronized RGB lighting. CORSAIR iCUE software has been at the forefront of some of the world's most ambitious and spectacular-looking system builds, and now extends beyond the PC with lighting that illuminates your entire environment. Available in a comprehensive Starter Kit and two sizes of Expansion Kits, LS100 Smart Lighting Strips transform your room with vivid customizable lighting profiles, game and media integration, and audio visualization.

Experience an unprecedented level of immersion with real-time media integration - CORSAIR iCUE software analyzes your video signal and outputs matching colors from the LS100 Smart Lighting Strips on your screen's edges to the surrounding area, taking the action beyond your screen whether you're leading your team to victory on the battlefield or watching your favorite movie. Your ambient lighting setup can also turn your room into a full-scale audio visualizer that brings every beat of your music to life in real-time.

Thermaltake, a leading premium gaming tower manufacturer, is thrilled to announce a new compact design case line up- the Commander G Series Mid-Tower Chassis including G31, G32, and G33. The Commander G Series Tempered Glass ARGB Edition mid-tower chassis is a brand-new high airflow case designed with a special mesh front panel. This entry-level chassis comes with a preinstalled 200 mm ARGB fan that can be controlled via motherboard synchronization software or the RGB switch on the I/O port. Located at the rear of the chassis is another 120 mm standard fan preinstalled for outstanding ventilation. Other outstanding features include a 4 mm tempered glass panel, a riser GPU support bracket, and removable magnetic filters for an overall exceptional PC performance which is the deal for both gamers and enthusiasts.

Editor's note: Our review is here, for those interested.

CORSAIR, a world leader in PC gaming peripherals and enthusiast components, today announced a new line of PC cooling fans to elevate the aesthetics of any build: CORSAIR iCUE QL RGB PWM fans. Available in 120 mm and 140 mm sizes, every QL RGB fan features quad light loops lit by a total of 34 individually addressable RGB LEDs, creating incredible visuals from either side. Multi-fan kits of QL RGB fans are bundled with a CORSAIR iCUE Lighting Node CORE RGB Lighting Controller, capable of controlling the lighting for up to six CORSAIR RGB fans at once through CORSAIR iCUE software.

No other RGB fan comes close to the brightness and vibrancy of QL RGB. With inner and outer light loops on both the front and back of the fan, it is uniquely capable of intricate, bright, and detailed lighting effects that impress from any angle, regardless of whether it's used for intake or exhaust. A semi-transparent fan blade allows the RGB lighting to shine through, while a durable machined aluminium hub cover on either side completes the QL RGB's stunning look.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear and Enthusiast Memory solutions, today announced the release of the Thermaltake TOUGHRAM RGB DDR4 Memory Series which now comes in a white edition along with new frequencies of 3,200 MHz and 3,600 MHz 2x 8 GB. TOUGHRAM is supported by Intel and AMD platforms and features 10-layer PCB construction, 2oz copper inner layers and 10μ gold fingers, the TOUGHRAM RGB white edition is not only visually appealing, but is also high in performance. The TOUGHRAM RGB White Edition is built with premium fine coating that reveals true elegance from inside out.

The TOUGHRAM RGB DDR4 Memory Series 3,200 MHz and 3,600 MHz white edition is now available for pre-order at the TT Premium website. Please refer to the Thermaltake website or contact your local Thermaltake sales or PR representative for more information on pricing for the Thermaltake TOUGHRAM RGB DDR4 3,200 MHz and 3,600 MHz white edition memory kits.

Phanteks today announced the release of the Digital RGB LED motherboard adapter. The cable offers a simple and easy solution to synchronize all your Digital-RGB products with a compatible motherboard with an addressable RGB lighting header.

The cable features two connectors, one for Phanteks' DRGB products and the other for third-party addressable RGB products allowing you to expand your lighting configuration. Expand and synchronize your lighting, all with one cable.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear and Enthusiast Memory solutions, today announced the release of the Thermaltake TOUGHRAM RGB DDR4 Memory Series which comes in new frequencies of 4,000 MHz, 4,266 MHz and 4,400 MHz 2x8 GB modules, supported by Intel and AMD platforms. Featuring 10-layer PCB construction, 2oz copper inner layers and 10μ gold fingers, the TOUGHRAM RGB enhances overclocking performance and betters gaming experiences. The high-frequency memory kits are constructed with higher standard chips, which have been tested to achieve higher and more stable overclocks. Our latest module 4,400 MHz and 4,000 MHz was tested with Intel's Core i7 platform, ASUS ROG MAXIMUS XI GENE and MAXIMUS XI HERO motherboards and remained stable under load.

Thermaltake CEO Kenny Lin is excited to launch the newest addition to the TOUGRAM RGB Series. "We are glad to embrace the new era of high-frequency memory. With the rapid rise of esports, higher frequency ram is essential for faster and smoother performance. Level up your gameplay with the next level TOUGHRAM RGB DDR4 16 GB Memory Kit in 4,000 MHz, 4,266 MHz, 4,400 MHz." stated Thermaltake CEO Kenny Lin.

Montech, a new enthusiast PC Case, Power and Cooling solutions brand based in Taiwan introduces their new high performance Z3 ARGB 3-in-1 120 mm system fan pack. The Z3 ARGB comes with 3 120 mm ARGB system fans, 1 Remote Control Fan Hub, and Remote controller. The Z3 ARGB lighting system is not only controllable through the Remote Control Fan Hub but is also compatible with Asus, Gigabyte, MSI and ASRock's ARGB ready mainboards. This makes the Z3 ARGB extremely flexible with all solutions on the market.

The Montech Z3's ARGB Dual Ring lighting system provides ARGB lighting in both the fan hub, and fan frame for dual lighting effects. The Z3 ARGB is a 3 in 1 ARGB system fan solution, each box contains 3 120 mm ARGB system fans, the Remote Control Fan Hub and Remote controller. The Z3 ARGB simultaneously supports ARGB (addressable RGB) control from the Remote Control Fan Hub, Mainboard ARGB software and PC case LED/Reset controls. Users can freely swap between 3 different control modes on the fly.

Cooler Master, a global leader in designing and manufacturing innovative computer components introduces the ELV8 Universal Graphics Card Holder. Featuring vibrant RGB lighting, the ELV8 features a sleek design alternative to the traditional vertical GPU holder. The ELV8 features an elegant design equipped with an addressable RGB strip that illuminates the aesthetics of your PC build. Designed to enhance overall user experience, the ELV8 is compatible with major motherboard manufacturers and can sync with RGB-ready software.

The GPU holder is designed to attach to the motherboard's PCI-E slot, allowing a wide range of case compatibility. The ELV8's adjustable supporter bracket accommodates graphics cards of all sizes, allowing builders the freedom of choice. The ELV8 prevents the GPU from potential long-usage damage, including possible bending and sagging. Additionally, the GPU holder reduces stress on the motherboard PCI-E slot by supporting the GPU's overall weight.

Cooler Master, a global leader in designing and manufacturing innovative computer components introduces the MasterAir MA620M CPU Air Cooler. Continuing the renowned MasterAir Series, the MA620M are dual aluminium towers equipped with a newly designed cross-platform mounting system to provide maximum air cooling.

Peak Performance, Unique Aesthetic
The MA620M features a unique dual tower heatsink with enlarged fins and utilizes 6 copper heat pipes for optimal air flow and cooling performance. Inspired by a stealth-like aesthetic design, the MA620M employs unique lighting effects across the top cover of the cooler, powered by addressable RGB.