OCZ's PC2-9200 Flex II modules can be used with both air and watercooling. They are designed for 1150 MHz DDR2 at CL 5 with 2.1V. In our testing we could easily push the modules above DDR2-1200 without an extra voltage increase.
Lexar is joining the frey of high-performance UDMA Compact Flash cards with their Professional 300x series of cards. We get to take a look at their 8 GB version with a big, pleasant suprise during benching.
PQI's newest class 6 SDHC card is aimed at those looking for a cheap and fast storage card. Being a competitively priced class 6 card it is definitely worth considering if you are looking to upgrade your camera or other write intensive devices' memory.
The new "Turbo" Compact Flash card from A-DATA raises the bar from 266x to 350x performance. It also adds Ultra DMA capability and uses SLC flash memory to attain insane speeds never seen before. If you are looking to build a solid-state HDD using CF Technology then this is one of the cards you should definitely consider.
Mushkin has also jumped the 4 GB DDR2 memory bandwagon and is offering these kits at tighter than usual latencies. This kit runs at 4-4-4-12 at 2.0 - 2.1V.
Lexar's new entry level 8 GB SDHC card is quite unique. It is both reasonably priced and offers really good performance for a "Class 2" card. Actually the card surpasses the Class 2 requirements in our testing. At around $50 quite a nice achievement.
OCZ is offering a full line-up of DDR3 memory. Their Platinum Series was always known for their great price/performance ratio and this Enhanced Bandwidth kit is no different. It offers tighter timings at 1600 MHz than the competition, at a lower price point. So can it give us some serious bang for our buck?
The G.Skill Pi Series goes a completely different route, than other high-end memory today. Instead of pushing the envelope on voltage, it gives you some crazy performance at default or close to default DDR2 voltage.
A-DATA is pushing the performance envelope with their Turbo series of CF cards. The series goes up to 16 GB and aims to give you the best possible performance - if you are willing to pay for it.
There are not many manufacturers offering such massive kits, but Winchip has made some waves before with unique offerings. Their 667 MHz 4x 4 GB kit runs at CL5. Such a large capacity kit is intended for very specific scenarios. We try to showcase some of these.
A-DATA is one of the few companies, which offer 32 GB Compact Flash cards. We take a look at the unit and also give it a go as a hard drive, as it certainly has the size for such a scenario.
The A-DATA X-Series is available in DDR2 and DDR3 flavors. Their DDR3 1600 MHz is set at a solid CL7 and comes with graphite colored heatspreaders in a very elaborate package. If 1600 MHz is not enough, you may go for the 1900 MHz version instead.
The OCZ ReaperX HPC memory series is the newest variant of the heatpipe cooled memory available from the manufacturer. Its new design improves on the cooling with dual heatpipes and finer fins to keep the parts cool. In our testing we saw excellent performance going all the way to DDR2-736 at 3-3-3-12.
Crucial has updated their successful Tracer line-up with the Ballistix Tracer 4 GB Dual Channel kit. Despite stock ratings at 800 MHz with CL4 timings at 2.2V this kit is capable of reaching 1120 MHz stable at CL5 and 2.2V. In addition, the Ballistix Tracer Reds were completely stable at stock speed and timings with only 1.8V, making this a great kit for those with limited voltage options. That said, the entirely red LED accented theme and great performance from these high density 2GB modules is sure to please.
Cellshock has begun offering their high-end DDR3 memory modules with blue heatspreaders. Their new 1866 MHz CL8 is a speed demon in disguise and has plenty of reserves, pushing our P35 board to the limit. It manages CL7 at the advertised rating and should also be able to break the 2 GHz barrier at CL8.
Aeneon is entering the DDR3 market with their X-Tune brand. This series is aimed at the gamers and their first offering is set at 1333 MHz with CL8. It comes with very nice looking black heatspreaders and a unique, blue PCB
The Ballistix DDR3 1600 MHz CL8 Kit is Crucial's only enthusiast DDR3 offering at the moment and as such it has been placed right in the middle of the MHz and CL rating spectrum. The memory kit does actually manage speeds of almost 2 GHz and tighter timings at the stock speed of 1600 MHz.
Cellshock is a newer brand which offers uncompromising quality. This can already be felt and seen when you take a close look at the massive heatspreaders which use real thermal paste and are secured by hex screws. The 1066 MHz kit features black spreaders, while top top of the line 1150 MHz offering utilizes red ones.
GeIL broke into the market with the Golden Dragon Series in the past and have now "resurrected" the dragon in form of the Black Dragon DDR2 line. The memory features a gorgeous looking PCB with a golden dragon head with bright red LEDs as the eyes. The entry level CL4 variant looks quite promising and performs just as well.
Crucial's Newegg Lanfest 2K7 Special Edition memory kit is an extreme overclocking kit at its best. With stellar looks and the potential to simply shatter the rated specifications, this kit definitely won't fail to please the overclocking needs of any PC enthusiast and at a great price to boot.
OCZ's new DDR3 1800 memory kit is geared towards early adopters, overclockers and enthusiasts that always want to have the latest and the greatest. We tested the 2 GB kit and were surprised how well balanced overclocking is. You are free to run aggressive CL5 timings at lower clocks or go full out, up to 1850 MHz.
A-DATA is joining the band wagon of 1200 MHz memory with their Extreme Edition memory. Many manufacturers have displayed memory at these speeds at Computex this year. The kits are available in 1 or 2 GB variants and come with the new, cleaner heatspreader. This Extreme Edition memory is the first to manage 1200 MHz at default voltage with no problems at all.
DDR3 P35 boards and the new memory standard were a big topic at CeBIT and all major memory manufacturers showed DDR3 up and running at Computex. One of these companies is Winchip with their DDR3 1600 MHz CL8-8-8-15 memory. We take a first look at the new memory to let you know, what it holds in store.
Mushkin is well known for the solid memory kits they make. Today we have the Mushkin XP2-6400 2 GB on our test bench. These modules are specced to run at DDR2-800 at CL4. With a price of $150 for 2 GB this kit is sure not the cheapest, but it comes with Micron D9 memory chips. In our testing we saw very nice voltage scaling up to DDR2-1136 at CL5.
Winchip is a well known brand in Asia and is now entering the European market with their memory products. The company has a long history in the OEM sector, while the heatspreader of their PC2-9600 memory looks quite unigue. The 2 GB memory kit, which costs $199, can manage an impressive 1240 MHz at CL5-5-5-15 on our testbed.
