A Closer Look

The aluminum radiator used in the P7-L240 utilizes a low fins-per-inch (FPI) count of 18 (according to my count). This is slightly less than the more typical 21 FPI of most all-in-one liquid coolers on the market. A lower FPI radiator does not require a fan with as much static pressure. This should allow their unique fans to provide adequate cooling while improving noise levels ever so slightly. Other than that, it's a simple 240 mm radiator similar to those seen with many other AIOs. When it comes to tubing, Aerocool has sleeved the tubing for a more attractive appearance, rather than using corrugated tubing or the typical rubber hose.


The pump's housing is unique in its shape and design, featuring a removable top plate for refilling the unit. Overall, it's an attractive design that moves away from the more typical round or boxy Asetek- and Coolit-based designs.


The base is copper, and while a bit discolored, the contact surface for the CPU was fairly clean with only my finger prints as blemishes. The base appears to be flat, based on a quick check with a razor blade. No deep machining marks are evident, but I would have liked a bit of polish here. I can't help it, I love a nice mirror finish.


The P7-F12 fans used here have a higher RPM value than the individual fans Aerocool will sell, featuring an RPM range of 600-1800 and a CFM of 29.84-71.65. The design is definitely more optimized for airflow than static pressure. However, with the radiator's slightly lower FPI count, performance should be just fine.