Installation

Installation is quite simple. First, position the backplate on the motherboard with the proper screws. Then, using the provided pillars, secure the backplate to the board. With that done, secure the mounting arms to the pillars.


Next, apply some thermal paste and secure the pump block to the mounting arms.


Finally, install the fans to the radiator and plug the fans and pump into their proper motherboard headers. Once done, connect the RGB wires to the controller or proper motherboard header and you are done.

I would rate the Captain 240EX RGB's installation a 9 on a scale of 1 (hardest) to 10 (easiest). Installation is very straightforward and simple, but the many wires because of the fans and RGB will result in end users spending some time on tidying everything up.