Monday, November 23rd 2020
PowerColor Radeon RX 6800 XT Red Dragon Graphics Card Pictured
Hot on the heels of its RX 6800 XT Red Devil unveiling, we have pictures of the Radeon RX 6800 XT Red Dragon, positioned a notch below the Red Devil. The Red Dragon comes with a milder factory overclock than the Red Devil, and hence a simpler cooling solution that's 2.5-slot thick (compared to 3-slot of the Red Devil). It uses an aluminium dual fin-stack heatsink design that uses a trio of fans—a smaller central fan flanked by larger fans—to ventilate the cooler.
The RX 6800 XT Red Dragon cooler is longer than the PCB by about 2 inches, so much of the airflow from the third fan goes through the card, and out through vents on the backplate. The power input configuration for the card is very likely the same 2x 8-pin PCIe as on the Red Devil. We also spy a dual-BIOS selector switch. Outputs include three DisplayPorts and an HDMI, there's no USB-C. It's also likely that PowerColor may reuse this exact board design for an RX 6800 Red Dragon card.
Source:
VideoCardz
The RX 6800 XT Red Dragon cooler is longer than the PCB by about 2 inches, so much of the airflow from the third fan goes through the card, and out through vents on the backplate. The power input configuration for the card is very likely the same 2x 8-pin PCIe as on the Red Devil. We also spy a dual-BIOS selector switch. Outputs include three DisplayPorts and an HDMI, there's no USB-C. It's also likely that PowerColor may reuse this exact board design for an RX 6800 Red Dragon card.
5 Comments on PowerColor Radeon RX 6800 XT Red Dragon Graphics Card Pictured