GIGABYTE GeForce RTX 4090 WindForce V2 may not be the company's most premium RTX 4090 custom-design graphics card, but it has arguably the best power connector design. Almost every custom RTX 4080 and RTX 4090 comes with a design where in the PCB is half or two-thirds the length of the card, and the remainder of the length is dedicated to the cooling solution, where the heatsink can extend along the thickness of the card. In case of the RTX 4090 WindForce V2, this extended portion of the cooler is recessed by half, exposing the tail end of the PCB. The 16-pin 12VHPWR power input is pointed toward the tail-end, rather than toward the top of the card.

This makes cabling very convenient, as it no longer needs to bend nearly 180° as it emerges from the back of your motherboard tray. The power cable goes straight into the connector with no bending up to a roughly 8 cm length, before making a 90° turn to the back of your motherboard tray, reducing mechanical strain on the connector. Even the NVIDIA-designed adapter included with the card (the one that converts 4x 8-pin to a 12VHPWR), should look neater. It's likely that as a WindForce-series product, this card offers the lowest tier of factory overclocks by GIGABYTE. You still get dual-BIOS, which lets you toggle between this factory-OC, and a Silent BIOS that runs the card at reference speeds, with tighter fan tuning. The selling point, however, is its unique power connector design.