The Tesla K20s was an enthusiast-class professional graphics card by NVIDIA, launched on February 18th, 2013. Built on the 28 nm process, and based on the GK110 graphics processor, the card supports DirectX 12. The GK110 graphics processor is a large chip with a die area of 561 mm² and 7,080 million transistors. Unlike the fully unlocked GeForce GTX TITAN, which uses the same GPU but has all 2688 shaders enabled, NVIDIA has disabled some shading units on the Tesla K20s to reach the product's target shader count. It features 2496 shading units, 208 texture mapping units, and 40 ROPs. NVIDIA has paired 5 GB GDDR5 memory with the Tesla K20s, which are connected using a 320-bit memory interface. The GPU is operating at a frequency of 575 MHz, memory is running at 1300 MHz (5.2 Gbps effective). Being a dual-slot card, its power draw is rated at 225 W maximum. This device has no display connectivity, as it is not designed to have monitors connected to it. Tesla K20s is connected to the rest of the system using a PCI-Express 2.0 x16 interface. The card measures 267 mm in length, and features a dual-slot cooling solution. Its price at launch was 3199 US Dollars.
Based on TPU review data: "Performance Summary" at 1920x1080, 4K for 2080 Ti and faster.
Performance estimated based on architecture, shader count and clocks.
Clock Speeds
GPU Clock
575 MHz
Memory Clock
1300 MHz
5.2 Gbps effective
Memory
Memory Size
5 GB
Memory Type
GDDR5
Memory Bus
320 bit
Bandwidth
208.0 GB/s
Render Config
Shading Units
2496
TMUs
208
ROPs
40
SMX Count
13
L1 Cache
16 KB (per SMX)
L2 Cache
1280 KB
Theoretical Performance
Pixel Rate
29.90 GPixel/s
Texture Rate
119.6 GTexel/s
FP32 (float)
2.870 TFLOPS
FP64 (double)
956.8 GFLOPS (1:3)
Board Design
Slot Width
Dual-slot
Length
267 mm
10.5 inches
TDP
225 W
Suggested PSU
550 W
Outputs
No outputs
Graphics Features
DirectX
12 (11_0)
OpenGL
4.6
OpenCL
3.0
Vulkan
1.2.175
CUDA
3.5
Shader Model
6.5 (5.1)
GK110 GPU Notes
NVENC: 1st Gen
NVDEC: 1st Gen
PureVideo HD: VP5
VDPAU: Feature Set D
L1 Cache is configurable from 16 KB up to 48 KB per SMX
GK110 has 5 GPCs each capable of 8 pixels per clock. This limits complete GPU to 40 pixels per clock and because of that it can't feed all 48 ROPs when they all require data at the same time.
Additional ROPs however can be used for MSAA (because it doesn't require additional data from rasterizers, while giving more work to ROPs.)
Latest Drivers:
Windows XP / Server 2003 x64:
Quadro Release R319 U2 (321.01)