Thermal Solutions specialist GELID Solutions reveals the GX-7 CPU cooler of its GAMER product line. Engineers at GELID Solutions have created an outstanding new CPU cooler with 7 power heat pipes. Contrary to traditional heat pipe arrangement for this GAMER CPU cooler "GX-7", a special array of heat pipes was used to take full advantage of all 7 heat pipes heat transfer capacity. Further V-shaped aluminum fins were used in the center of the heat sink to allow airflow to reach the heat sink more evenly. Openings inside of the heat sink and near the heat pipes let fresh-air flows in from the top and the bottom to zones normally poorly ventilated, and eliminate the creation of hotspots. The unique heat sink shape supports dual fans.

Included in the GX-7 is the multi-award winning Wing 12 PL fan, allowing the cooler to reach remarkable temperature. The Wing 12 PL Blue features blue LEDs and unique Nanoflux bearing which ensures a friction-free and silent operation. Thanks to the clever design and magnetic bearing, the impeller can be detached for easy cleaning. Additionally, fan blade winglets were designed to achieve larger airflow and greater static pressure. The fan also includes a premium PWM control, so the temperature can be controlled precisely by the BIOS.

ENERMAX is proud to announce the release of all new CPU Cooler line, ETS-T40 series. It has world leading thermal resistance value down to an incredible 0.09°C/W. With patented VGF, SEF, HDT, and VEF design, plus ENERMAX renowned Twister-bearing fan, ETS-T40 can easily cool down hot-spoil heavy-duty CPU without adding system noise. The unique spoilers design redirects the air through the windless area behind the heat pipes of 52 fins to maximize air convection rate and remove the heat that conventional design cannot reach.

GELID today announced a revision of its Tranquillo CPU cooler. Revision 2 of this aluminum fin tower-type cooler comes with three major changes, an updated heat pipe profile; a new AMD socket clip that allows 4x 90° installation; and an improved heatsink shape. To begin with, the four exposed-copper heat pipes project out of the fanned out better, with the heat pipes almost reaching the periphery of each of the fins. Next, a new AMD socket clip allows you to orient the heatsink in the same way you can with the square bolt layout of Intel sockets (90° in any direction). Lastly, in the space between the CPU base and the bottom of the aluminum fin stack, GELID put a larger heatsink than the one found on the original Tranquillo. The Tranquillo Rev. 2 is certified to work on Intel sockets LGA1366, LGA1156, LGA1155, and LGA775; AMD sockets AM3, AM2+, and AM2. The company did not give out pricing information, but usually revised SKUs carry the same market prices as the originals they're revisions of.

Prolimatech released a new variant of its iconic Megahalems CPU heatsink, called the Black Series Megahalems. With the same exact dimensions as the original at 130 x 158.7 x 74 mm (LxWxH), the new variant uses black colored aluminum fins. The coating doesn't make for a polished, glossy surface, but a grainy one, which increases surface area. The design remains the same: six nickel-plated copper heat pipes pass through a base, conveying heat to two aluminum fin stacks that are arranged along each arm of the U-shape the heat pipes make. The Black Series Megahalems is compatible with all the current CPU socket types, including AMD AM3+, AM3, AM2+, AM2; Intel LGA1155, LGA1156, LGA1366, and LGA775. The Prolimatech Megahalems Black Series is listed on Caseking.de for €54.90.

Japanese cooling expert Scythe is announcing today the successor of popular Mugen 2 CPU Cooler. Mugen 2 CPU Cooler was awarded many times and is well known world-wide to mainstream users, Overclocker and Enthusiasts. During the development process main focus was set on improvement of performance and mounting mechanism as well as shrinking the heatsink dimensions. New Mugen 3 CPU Cooler is ready to take on the legacy.

While optimizing the performance the whole heatsink design of Mugen 3 CPU Cooler was re-worked which resulted in creation the improved fin-structure M.A.P.S. (Multiple Airflow Pass-Through Structure). Enhancements were achieved by reducing the aerodynamic resistance as well as improving of the overall heatsink stability. Furthermore Mugen 3 is equipped with total of six high-quality copper-heatpipes where the predecessor had only five. Typical for Scythe is the excellently processed and flat surface of the copper base which was refined by a thin nickel layer to prevent corrosion.

iChill CPU Coolers are the ultimate thermal solution for the heat, especially in summer, that can damage your PC's CPU (main brain). A CPU that constantly runs too hot will have a shorter life than one that runs cooler, and could also cause problems like random shutdowns and the loss of important data. iChill brings you the X5, XXX and Storm CPU thermal solution!

When looking for ways to cool a PC's CPU, the first thing to do is reduce the overall temperature inside the PC's case, because that's where the CPU "lives." The best way to do that is to create an airflow that brings in cool air from the lower front of the case and exhausts hot air out the back of the case. After all, the fan that cools your PC's CPU can't work very well if it's blowing hot air onto your CPU. Don't make the mistake of thinking that your power supply's fan will cool your entire PC, like it did in older PCs.

The Japanese manufacturer Scythe Co. Ltd. (Tokyo, Japan) officially announces the availability of new low profile Top-Flow CPU Cooler Kozuti. Unlike regular coolers, the fan is positioned below the fins, reducing the total height of the cooler significantly.

The Kozuti CPU Cooler is equipped with a total of three 6mm heat pipes. Applying the newly developed S.F.M.S (Stealth Fan Mounting Structure) the heatpipes are arranged in a low profile oval structure. This enables to provide space for the 80 x 80 x 10mm fanmotor in between the oval structure and below the fins, making it merely 40mm in height. This positions the cooler to be our most compact and slim cooler fit for HTPCs and slim chassis systems. Active cooling is achieved by the 80 x 80 x 10 mm slim fan the speed of 800 rpm (± 30%) - 3.300 rpm (± 10%), generating an air flow of 6.0 CFM ~ 24.82CFM = 10.2 m³ / h ~ 42.2 m³ / h at a noise level of 8.2 ~ 32.5 dBA.

Prolimatech, the master of cooling is going a step further after the success of the Prolimatech Megahalems by presenting another revolution in CPU cooling with the Prolimatech Genesis. Besides the immaculate quality - which is present across their entire product line-up - the Genesis sets new standards in cooling capability.

Prolimatech continues the trend set forth by the Megahalems and Super Mega by utilizing two separate towers, but instead of placing them next to each other, they have been rearranged for maximum performance. The large array of cooling fins can hold up to three 120 or 140 mm fans, two of which can be installed right out of the box with the included mounting materials. Besides keeping the CPU cool, the construction allows for direct air flow across critical areas like the memory and power phases of the system.

Japanese cooling specialist Scythe hereby officially announces the launch the new high-end CPU Cooler Mine 2. The Mine 2 CPU Cooler is based on a twin cooler Layout. Eight copper heatpipes transport heat to two generously dimensioned cooling blocks. By placing the fan in between the 2 heatsink towers, intake as well as exhale airflows are optimized to provide high performance. Furthermore, the lower part of the installed fan is designed to cool the devices around the CPU socket, such as voltage regulators and RAM. The structure of the heat sink makes it possible to use a total of up to three fans by purchasing separately sold fan clips. In this manner, the air flow and thus the cooling capacity of the Mine 2 will be significantly increased by using the push / pull principle.

By default, the Mine 2 will be delivered with a centrally placed, adjustable 140 mm Slip Stream PWM & VR fan. Although the fan supports the PWM feature, the user can manually adjust the PWM bandwidth between 470 to 1,370 rpm and 740 to 1,900 rpm. Despite the changed bandwidth, the fan is still controlled by the PWM signal from the motherboard, allowing an individual but also dynamic fan control. Alternatively it is possible to disable the PWM function. Instead the fan can be controlled manually in a range of 500 to 1,700 rpm. This gives every user the option to optimize the Mine 2 CPU cooler for performance or low noise according to own preferences.

Scythe Corporation, a renowned cooling manufacturer, today announced the release of its third version of the Universal Retention Kit. This enhanced version comes with several improvements and wide multi-socket compatibility for both AMD and Intel sockets. The list of compatible sockets contains Intel Socket T / LGA775, LGA1156 LGA1366 and the brand-new socket LGA1155. It furthermore supports the AMD Sockets 754, 939, AM2, AM2+, AM3 and 940. Universal Retention Kit 3 is once again based on a backplate mounting system and allows firm contact pressure as well as secure mounting of even big and heavy CPU Coolers.

Commonly supplied retention bracket of AMD Mainboards are made of plastic which has a downside of giving risk of breaking when using with an on-market High-End CPU Cooler. This problem doesn't accrue with the supplied retention bracket of the Universal Retention Kit 3 which is made of solid steel and thereby provides the necessary sturdiness even for big High-End CPU Coolers. For Intel architecture this kit allows pushpin mounting to be converted to backplate mounting, thereby providing high mechanical stability hence also providing the necessary sturdiness even for big High-End CPU Coolers with a pushpin solution. In order to ease the detachment process of Push-Pins, a convenient Push-Pin Removal Tool is supplied along in the accessory.

Cooler Master displayed its next performance CPU cooler, the H-B6. It features an aluminum fin tower design, but with its heat-pipes passing along the length of the fins rather than breadth (like on most tower-type heatsinks). This approach spreads heat more evenly, and adds to the turbulence. The heatsink measures 136 x 127 x 163 mm; the fan is a typically-sized 120 mm spinner with S-shaped blades. All modern CPU sockets are supported, including LGA1366, LGA1155/LGA1156, LGA775, AM3/AM2+/AM3.

Spire Corp officially introduced their new high-end tower cpu cooler today. Gemini is the Zodiac sign for the twins. We have codenamed our newest high-end thermal solution due to the two towering dimpled fin heat-sinks. Gemini is the ultimate evolution of the hugely successful TherMax cpu cooler series. The increased number of heat-pipes combined with a higher number and density of dimpled fins and crowned with two high airflow fans for extreme cooling performance. Six U-shaped 6mm heat-pipes are in contact through the solid copper base with the CPU, rapid heat transfer to the 52 aluminum dimpled fins providing a larger surface area for optimum heat dissipation.

The Gemini is supplied with two 12cm balanced DC fans providing high airflow. There are three versions of the Gemini, this because of different noise level requirements from users. One demands better cooling and cares less for noise, others want to build a silent system. The only difference is in the fan type. Part# SP986B1-V2 comes without PWM and PCI fan speed controller. Part# SP986B1-V2-P comes with PWM (4pin) controlled fans and the third version, part# SP986B1-V2-2P comes with PWM & PCI fan speed controller included. Compatibility is guaranteed with multi-platform mounting for all current Intel and AMD micro-processors. The Gemini is pure cooling power that takes performance to the level. Spire - Powered by Innovation.

Noctua today officially introduced its new NH-C14 CPU cooler. Sporting an exquisite, uniquely flexible 140mm dual fan setup of two Noctua NF-P14, the NH-C14 is a highly customisable, premium-class top-flow solution that further boosts the renowned quiet cooling performance of the company's much acclaimed NH-C12 series.

"Our NH-C12 coolers are renowned to rank among the most capable top-flow cooling solutions on the market, so we're truly proud to offer a further substantial improvement in quiet cooling performance with the new NH-C14", says Mag. Roland Mossig, Noctua CEO. "This model really closes the gap to good tower coolers while being much lower in height and ensuring better component cooling."

Zalman announced its latest CPU cooler, the CNPS5X. Its design is a fusion between traditional tower-type and Zalman's own nested fan design heatsink. The CNPS5X is designed for medium-thru-heavy thermal loads, more like highly overclocked dual-core or mildly overclocked quad-core chips. The company excluded support for LGA1366 for this reason, but added support for Intel's upcoming LGA1155 socket. Other sockets supported include LGA1156, LGA775, and AM3/AM2+/AM2.

Its design consists of Y-shaped aluminum fins, to which heat is conveyed evenly by three 8 mm thick copper heat pipes. The heat pipes converge at a copper CPU base. The 92 mm fan is nested inside the aluminum fins. It spins at 1400~2800 rpm, with a rated noise level of 20~32 dBA. Together, the CNPS5X measures 127(L) x 62(W) x 134(H) mm, weighing 320 g. Installation is made easy by push-pins for Intel sockets, and a fixed clip for AMD sockets, requiring no access to the back of the motherboard. Slated for market release in December, the CNPS5X from Zalman is priced at €26.90.

Xigmatek unveiled its newest CPU cooler targeted at value-conscious gamers, the LOKI SD963. Its conventionally-shaped tower heatsink measures 92 x 50 x 134 mm (W x H x D), weighing 330 g. It uses a dense aluminum fin array that channels air (it's blocked on its narrow sides). Three 6 mm thick copper heat pipes make direct contact with the CPU at the base. A 92 mm fan that spins at 1200~2800 rpm with a noise output of 20~28 dBA is bundled, though the heatsink is designed with provision for a second (pull) fan. Vibration-dampening rubber bolts hold the fan and the heatsink together. All current CPU socket types are supported, including LGA1366, LGA1156, AM3/AM2(+), and LGA775. The company did not reveal pricing, though one can expect it to be on the lower side.

Japanese manufacturer Scythe officially announces the new CPU Cooler Rasetsu. This cooler, already shown at the CeBit 2010, combines the outstanding design of the Yasya CPU Cooler with a top-flow layout. The heatsink is divided into two blocks, and each is equipped with the T.M.L.F. (Trident Multi Layer Fin) structure. Because of this irregular lamellar structure and the unparallel arrangement of six copper heatpipes, surface directly cooled by the fan is highly increased and thus maximum heat dissipation is achieved.

New 120 mm "Slip Stream 120 PWM Adjustable" fan is supplied for optimized airflow. Although the fan supports the PWM feature, user can manually adjust the bandwidth between 470 to 1,370 rpm and 740 to 1,900 rpm. Easy mounting is available by the famous V.T.M.S. (Versatile Tool-Free Multiplatform System) which requires no motherboard removal for the heatsink mounting. Rasetsu CPU Cooler is compatible to all current sockets, including the new socket LGA 1156, LGA 1366 and AM3.

Prolimatech's latest creation is an HTPC-friendly low-profile CPU heatsink named Samuel 17, after the Biblical Old Testament chapter with the story of David and Goliath. The cooler uses a CPU base in which six nickel-plated copper heat pipes make direct contact with the processor, and convey heat to a dense aluminum fin array that propagates along the plane of the motherboard. On this, users can install a 120 mm fan. The heatsink measures 92 x 45 x 82 mm, weighing 410 g. It supports all current sockets including LGA 1366, LGA 1156, LGA 775, AM3/AM2(+). It is expected to be priced at 40 Euros when it goes on sale.

Noctua today announced the availability of the new NM-A90 Upgrade-Kit for NH-U12P SE2 and NH-U9B SE2 users. The upgrade makes it possible to install the heatsink turned by 90° on AMD motherboards. NH-U12P SE2 and NH-U9B SE2 users can order the NM-A90 kit free of charge on Noctua's website.

"We've received excellent customer feedback on our new SE2 coolers", says Mag. Roland Mossig, Noctua CEO, "but some AMD users expressed the wish to have the possibility to change the alignment of the coolers on AMD motherboards. We've always been convinced that premium quality products and premium quality service should go hand in hand, so we're responding to this demand by offering the new NM-A90 kit as a free upgrade."

Scythe announces its newest high-end CPU cooler, named "Yasya" to the market. Yasya CPU Cooler is the first cooler from Scythe equipped with the newly developed T.M.L.F. (Trident Multi Layer Fin) structure. This special design maximizes the cooling surface to provide the best cooling result of the heatsink. By placing the heatsink fins as well as total of 6 copper heatpipes in unparallel design, static pressure loss is minimized and heat transfer is maximized. New 120 mm "Slip Stream 120 Adjustable PWM" case fan is supplied for optimized airflow. Although the fan supports the PWM feature user can manually adjust the speed between 470 to 1,370 rpm and 740 to 1,900 rpm.

Easy mounting is available by the famous V.T.M.S. (Versatile Tool-Free Multiplatform System) which requires no motherboard removal for the heatsink mounting. Yasya CPU Cooler is compatible to all current sockets, including the new socket LGA 1156. Scythe Yasya will be available worldwide from early March 2010 at the price of 57 US$ (excl. Tax) / 35,90 Euro (Excl. VAT).

EKL brand Alpenföhn unveiled its newest CPU cooler, the Matterhorn. This cooler measures 138 x 100 x 158 mm, and weighs 1067 g (2.35 lbs). The construction is similar to that of several coolers in its category. A pre-lapped copper base draws heat from the CPU. From this, six heatpipes pass, conducting heat to a block of aluminum fins. The fins have notches that help heat dissipation over the air being blown by an attached Föhn120 Wing Boost 120 mm fan, which spins at 500 to 1500 rpm, with a max noise output of 24.8 dBA. The Matterhorn supports most current CPU sockets including LGA-1366, LGA-1156, LGA-775, AM3, AM2(+). Its price and availability are yet to be known.

Koolance rolled out its newest CPU water-block, the CPU-360. The new block boasts of broad compatibility with all current CPU socket types, an advanced microfin cold plate with 0.25mm fins, 0.30 mm channels, and an optimized flow path. The cold plate is complemented with a brass top, all metal surfaces have nickel plating to minimize corrosion. The block measures 4.9" x 4.9" x 0.6" (12.5cm x 12.5cm x 1.5xcm), and weighs 411 g (14.5 oz). While the package excludes nozzles, it includes all the retention material needed for Intel sockets LGA-775, LGA-1156, LGA-1366, and AMD sockets AM3/AM2+/AM2. The CPU-360 is listed on Koolance website at US $84.99.

Coolink today introduced its new Corator DS CPU-Cooler. Featuring Coolink's exclusive Gapless Direct Touch (GDT) technology that allows for an all copper contact area, the Corator DS brings the concept of direct contact cooling to the next level by further improving heat transfer. Four large 8mm heatpipes, a dual fin stack design and a PWM controlled SWiF2 120mm fan are among the features that enable the Corator DS to achieve an optimal balance between outstanding cooling performance and quiet operation.

"True to our vision of innovating instead of following, we worked hard to strengthen the advantages of direct contact cooling and to eliminate its drawbacks", explains Timothy Chu, Coolink CEO. "Thus we're proud to introduce the Corator DS today, which is our first product based on Coolink's exclusive GDT-technology. Its innovative contact surface in combination with the other features allows us to offer a complete high-performance cooling solution at an attractive price point".

Scythe is announcing today a new High-End TOP-Flow CPU Cooler by the name "Grand Kama Cross", which is the successor of former Kama Cross CPU Cooler. Grand Kama Cross is based on an X Structure layout using total of four 8 mm copper heatpipes for fast transfer of heat from the copper base to the aluminum fins. Thanks to the X Structure Design, easier mounting on CPU sockets as well as higher compatibility to tall RAM and Northbridge coolers are accomplished. By using the angled fin shape, airflow is redirected to allow additional cooling of surrounding components such as RAM, Northbridge and Voltage Regulators. For the optimum airflow, new Slip Stream 140 mm fan is first introduced with Grand Kama Cross CPU Cooler. PWM support allows flexible fan speed in a range between 500 and 1,300 rpm, automatically controlled by the motherboard creating airflow from 46 to 119 m³/h and accordingly 27.2 to 69.93 CFM. Both Slip Stream 140 mm fan and Grand Kama Cross CPU Cooler are using standard 120 mm fan mounting holes which allow the use of common aftermarkets 120 mm case fans as a replacement.

Noctua today officially presented its long-awaited NH-D14 premium CPU cooler. Combining a massive six heatpipe dual radiator design with an exquisite NF-P14/NF-P12 dual fan configuration, the NH-D14 is built to further improve the renowned quiet cooling performance of Noctua's award-winning NH-U12P series.

"Our NH-U12P coolers are widely regarded as one of the best solutions on the market, so it makes us especially proud that we can offer a further substantial improvement in quiet cooling performance with the new NH-D14", explains Mag. Roland Mossig, Noctua CEO. "The NH-D14 in Ultra-Low-Noise mode actually outperforms the NH-U12P at full fan speed, so we're confident that this cooler will appeal to overclockers and silent enthusiasts alike."

Sharkoon introduces two all new high-performance, and quiet, Tower-coolers for the AMD- and Intel-processors. The Sharkoon Silent Eagle CPU cooler options are the Model C92 with a 92mm fan and Model C120 with a 120mm fan. Both provide four U-equalizing 8mm cooling heat pipes and premium aluminium fins for efficient heat dissipation. This is further strengthened by the Direct-Touch-Technology: The heat pipes rest directly on the processor, so that the heat is released directly without having to detour through an extra plate to the cooling fans.

Sharkoon's popular Silent Eagle models utilize an innovative Golf ball surface texture application. The round dimples on the rotor blades minimize air turbulence and provides a boost in air output at the same rotational speed and noise emission. The fans are equipped with a 4-pin PMW connector to automatically regulate over the provided mainboard. The 92mm fan of the C92 model rotates between 350 to 1600 r/min, with a maximum sound volume of 24,8 dB(A) and motion air flow up to 72,9 m³/h. The heat sink, including fan, measures 120 x 92 x 77 mm (H x W x D) and weighs 550 g. The 120mm fan of the larger C120 model rotates between 359 to 1200 r/min and conveys a sound volume under full load of 20 dB(A) with a motion air flow of 83 m³/h. The C120 measures 157 x 125 x 86 (H x W x D) and weighs 755 g.