AMD is releasing a trio of dual-core desktop processors based on the K10 architecture, under the Athlon X2 7000 series. The trio consists of the overclocker-friendly 7750 Black Edition clocked at 2.70 GHz, the 7550 at 2.50 GHz and the 7450 at 2.40 GHz. The core, codenamed "Kuma" sports a basic cache design similar to the Phenom X3 and Phenom X4 processors, with 512 KB of L2 caches per core, and a shared L3 cache of 2 MB. The updated memory controller provides native support to the PC2-8500 (DDR2 1066 MHz) memory standard. The processor now sports a HyperTransport 3.0 3600 MT/s system interface. These, apart from the other tweaks AMD introduced with the K10 architecture give it an edge over current K8 based dual core AMD chips. The core is manufactured in the 65nm node.

AMD lifted the NDA over the Athlon X2 7000 series, following which several website posted reviews on the processors. Most of these reviews covered the Athlon X2 7750 Black Edition. The chip clocked at 2.7 GHz was found to be around 15% faster than a previous-generation Brisbane chip running at the same frequency, according to X-bit Labs, whose evaluation included several synthetic and real-world benchmarks. The same review team was able to overclock the chip to 3.30 GHz (+22 %) aided by a Zalman 9700 air cooler. The Athlon X2 7750 Black Edition will be priced at US $79. Links to some of the reviews are provided below.

Bit-Tech | Hexus | HT4U | Overclockers Club | Planet 3DNow! | Tweaktown | X-bit Labs

Advanced Micro Devices (AMD) is planning on releasing a new 55nm chipset by Q3 next year, that will power the company's Socket AM3 processors (Athlon X4, Phenom II X3, Phenom II X4). Codenamed AMD 880G, this chipset will become part of the AMD Live! "Pisces" platform. AMD 880G will feature an integrated Radeon HD 3450 (RV620) DX10.1 graphics core, support for DDR3 memory, HyperTransport 3.0, Universal Video Decoder 2 (UVD 2), Hybrid Crossfire with the on-board Radeon HD 3450 graphics core and a PCIe 2.0 x16 discrete card, Display Port/HDMI/DVI/SurroundView support. The 880G chipset will be paired up with a SB710 southbridge to deliver 12x USB ports and 6x SATA ports. This chipset is also said to bring OverDrive 3.0 to AM3 platforms.

Sources tell Expreview that AMD is working on a new graphics processor (apart from the mysterious RV790), as an immediate reaction to the 55nm high-end GPUs NVIDIA is set to release. NVIDIA on its part is working on GeForce GTX 260 (55nm), GeForce GTX 285 (successor to GeForce GTX 280) and the dual-GPU monstrosity, GeForce GTX 295. To rival this, according to the source, AMD is working on the RV775 and derivatives based on its yields' performance.

These GPUs are slated for January thru March 2009. It has some very interesting specifications. To begin with, 840 stream processors. While stream processors on a current generation RV770 cannot be added/subtracted in quantities of 40 stream processors, perhaps, the increment of 40 SPs is derived from an extra ALU cluster the RV770 comes with by default (which helps in die harvesting, where the spare ALU cluster makes up for any damaged cluster, thereby improving yields). This would require near-perfect GPUs in the making (if re-engineering of the RV770 on a large scale is to be avoided). Another interesting point is regarding the smaller die. At this point we are clueless as to how that is possible without re-engineering the RV770 at a large scale. Treat yourselves to the specifications meanwhile:

In an interview with Godfrey Cheng, Director of Technical Marketing in AMD's Graphics Products Group, Bit-Tech.net has quoted him saying that standards such as PhysX would die due to their proprietary and closed nature. Says Mr. Cheng:

"There is no plan for closed and proprietary standards like PhysX," said Cheng. "As we have emphasised with our support for OpenCL and DX11, closed and proprietary standards will die."

Bit-Tech.net interviewed the AMD person to get the company's take on EA and 2K's decision to adopt NVIDIA PhysX across all of their worldwide studios, earlier this week. Interestingly, when asked about how the major publishers such as EA adopting PhysX across all of their studios would impact the propagation of the API, Cheng responded with saying that monetary incentives provided to publishing houses alone won't help a great deal in propagating the API, and that the product (PhysX) must be competitive, and that AMD viewed Havoc and its physics simulation technologies as leaders. "Games developers share this view. We will also invest in technologies and partnerships beyond Havok that enhances gameplay." he added. PhysX is a proprietary physics simulation API created by Ageia technologies, which was acquired and developed by NVIDIA. You can read the full Bit-Tech.net interview with Godfrey Cheng here.

AMD today announced its intent to rapidly adopt the OpenCL 1.0 programming standard and integrate a compliant compiler and runtime into the free ATI Stream Software Development Kit (SDK).

OpenCL 1.0 was ratified today by the The Khronos Group, an independent standards body with company-members throughout the computing industry. The OpenCL programming standard and associated technologies are aimed at better enabling developers to write vender-neutral applications that can execute on either the CPU or GPU within a system. This allows developers to easily take advantage of whichever processor is best suited for the task at hand.

AMD is releasing its dual-core desktop processor based on the 65nm K10 architecture, codenamed Kuma. One of the first SKUs based on the core, the Athlon X2 7750, has been evaluated by Donanim Haber. The Athlon X2 7750 comes with a clock-speed of 2.70 GHz, and a HyperTransport 3.0 system interface. It has 512 KB of L2 cache per core, and a shared L3 cache of 2 MB. Donanim Haber put this chip to test on a Foxconn A7DA-S (AMD 790 GX + SB750) motherboard, with 2 GB of 800 MHz DDR2 memory. It was compared to the Intel Core 2 Duo E8200, Core 2 Duo E8400, Core 2 Duo E6420, AMD Phenom X3 8750 and Athlon X2 5200+ (Brisbane), all running at stock speeds.

A common feature with shopping seasons, namely summer and Christmas, is that consumer graphics giants, AMD and NVIDIA announce new products that push up the pure performance and performance per dollar envelopes. With this Christmas season however, nothing notably new is going to come out of their stables, making their existing products slog it out. This resulted in both companies resorting to some serious price-cutting with their existing mid-thru-high-end products.

In the wake of massive price-cuts by NVIDIA for the GeForce GTX 260, AMD has decided to prepare its own price-cuts for the one card that goes neck and neck with the GTX 260, Radeon HD 4870. Originally seated in the $299~$399 bracket, the GeForce GTX 260 and Radeon HD 4870 have become some of the key SKUs for both companies. These are the products we have seen going neck and neck, resulting in both companies refreshing them, and later resorting to price-cuts. NVIDIA refreshed GeForce GTX 260 with a 216 stream processor version that came with added shader compute power, while AMD responded with the 1 GB variant of the Radeon HD 4870. As on today, the company pricing for the Radeon HD 4870 has been set around US $199 for the 512 MB and $239 for the 1 GB variants. This roughly catches up with the pricing for GeForce GTX 260, with roughly $199~$219 for the 192 stream processor and $239~$249 for the 216 stream processor variant.

AMD declared new CPU information in mid November 2008; in consumer market, the AM2 based 45nm CPU which named "PhenomTM II" will be ready in January 2009; then, the new CPU which supports DDR3 will be released in February. In order to catch up the upcoming CPU, DFI LANParty already finished the compatibility test of the existed motherboards. Customers who bought DFI LANParty AMD 790FX/ 790GX motherboards can update the latest BIOS from website for supporting AMD 45nm Phenom II.

The DFI LANParty Phenom II ready motherboards are listed below:

• UT 790FX-M2R
• DK 790FX-M2RS
• DK 790FXB-M2RS
• DK 790FXB-M2RSH
• DK 790GX-M2RS
• JR 790GX-M2RS

It isn't news that Phenom II X4 would be released by AMD, on January 8 2009, but that the company would only start taking orders from channel vendors from that date onwards, meaning that Phenom II X4 would face only a paper-launch by the company on that date. A paper-launch is the state where the product is officially launched by the company, but isn't ready with the retailers for you to buy.

Sources tell OC Workbench, that the products will be available with the retailers tentatively by February 4 2009. Retailers could at best, start off with pre-orders in January. The first products to launch, are Phenom II X4 940 Black Edition and Phenom II X4 920.

AMD today announced that it expects revenue from continuing operations for the fourth quarter ended December 27, 2008 to be approximately 25 percent lower than third quarter 2008 revenue of $1.585 billion, not including process technology license revenue. The decrease is due to weaker than expected demand across all geographies and businesses, particularly in the consumer market.
AMD will report fourth quarter 2008 results after market close on January 22, 2009. AMD will hold a conference call on this day for the financial community at 2:00 p.m. PT to discuss fourth quarter results. A real-time audio broadcast of the teleconference will be provided at www.amd.com. The webcast will be available for ten days after the conference call.

It's already December, time for a new ATI Catalyst 8.12 driver. It's still a little bit early for the final driver release though, but a Beta version is already available, and now we know some inside information of what this driver will bring very soon. Here's a little sneak preview, with Catalyst 8.12 ATI will land its Stream support for Radeon video cards. The CAL (Compute Abstraction Layer) is now included in the Catalyst driver package. CAL is the enabling component for ATI Stream. Catalyst 8.12 is also said to bring Stream technology to ATI Avivo Video Converter, for enhanced video transcoding. For good or for bad, only ATI Radeon HD 4800 and Radeon HD 4600 series support this tool. At last, Catalyst 8.12 comes with many game performance improvements (read more below). Here's the link to the Catalyst 8.12 Beta version, the final release is coming soon. We'll inform you when it is available.

TUL Corporation, a leading manufacturer of AMD graphics cards - announces "The best of 2008" is now available online! Gamers from all over the world are eligible to participate in "The Best of 2008". Be a fair judge and vote for the best bang for the buck graphics of 2008!

All judges will be automatically entered the lucky draw and could win big for the latest PowerColor HD4830. PowerColor HD4830 provides all the high-tech essential outputs --HDMI / DVI / CRT on board design; runs at 575MHz core speed and 900MHz memory speed; and is highly recommended by the worldwide media.

Are you ready to win a HD4830 now? Details are provided here.

The year 2009 could be very decisive for AMD, with a fleet of desktop processors awaiting launch within H1, 2009. The company will also be preparing supportive core logic for compatibility with AM3 socket CPUs. Listed, are the highlights for the chipset division's product plans, as compiled by industry observer DigiTimes:

• The introduction of a value-oriented IGP chipset in January 2009, the AMD 760G, based on the RS780 architecture. This is expected to replace AMD 740G. It offers a DirectX 10 IGP without support for UVD, Hybrid Crossfire or DisplayPort. To be accompanied by AMD SB710 southbridge.
• The introduction of high-end AMD 790FX and 790GX chipsets that have been upgraded with native AM3 socket support, in May or June. To be accompanied by AMD SB750 southbridge.
• The company will introduce the RX780-based AMD 770, which also gets its share of changes that bring in AM3 socket compatibility, in July or August. To be accompanied by SB710.
• A next generation IGP-based RS880 northbridge would be introduced in May or June, also accompanied by SB710.
• Finally in September, the company will launch a proper successor to the 790FX, in the form of RD890, and the introduction of the new SB800 southbridge.

The Empire State Development Corporation, New York's economic development authority has approved $1.2 billion in state incentives for a foundry fab plant in Malta, NY by the AMD (eventually The Foundry Company). The incentives are tied to a $4.6 billion fab plant that will make computer chips for semiconductor companies, employing an estimated 1,465 people once completed. The plant will be located in the Luther Forest Technology Campus about 10 miles north of Saratoga Springs.

The $1.2 billion incentive comprises of tax-breaks and cash to AMD, toward building the plant. The development authority's five-member board of directors met in Manhattan for the vote, which was unanimously in favor of it. A public hearing regarding the incentives will be held Dec. 10 at 1 p.m. at the Luther Forest site.

A lot has been said about the launch schedules of AMD's upcoming 45nm desktop processors over the last fortnight. While the company itself slated its 45nm desktop CPU range to kick-off on January 8 2009, skeptics think otherwise saying it could take longer for AMD to have sufficiently stocked up inventories in retail channels.

HKEPC compiled a list of tentative order availability. time-frames for the 45nm CPUs sourced from PC manufacturers, which shows that the company launches Phenom II X4 940 on Jan. 8, while most of the product launches are concentrated in the months of February and April, 2009. Starting those months, channel vendors will be able to place bulk orders for those processors, to stock up inventories. Also pictured is the die-shot of AMD Deneb, and a picture showing the differences between the AM3 and AM2+ pin-grids (AM3 on the leftHS, AM2+ on rightHS).

ECS has released a partial list of its motherboards that are ready for the upcoming 45nm desktop processors by AMD. Featured in the list, are most of ECS' AM2 and AM2+ socket motherboards based on the AMD 7-series chipsets along with those based on NVIDIA GeForce 8100a and 8200a. CPU compatibility of these existing motherboards can be expanded by means of a BIOS update. Excluded from the update notably, are the company's 7-series chipset based motherboards that use the older SB600 southbridge. For links to the supported motherboards' product pages for BIOS updates, please visit this page.

Sources in the industry point out that the 7 GT/s GDDR5 memory chip made by Hynix (model: H5GQ1H24AFR), which was announced earlier in this week, would make it to several major graphics board SKUs by both AMD and NVIDIA. The two companies have chosen TSMC and its 40nm fabrication process as the foundry partner for their upcoming 40nm graphics processors, namely AMD RV870 and NVIDIA GT212.

Both these chips would feature GDDR5 memory bus capabilities, and there are indications of the 7 GT/s DRAM chip being incorporated into graphics boards based on these GPUs. Additionally, there is also word that AMD will be using the said DRAM chip in its current flagship graphics card, the Radeon HD 4870 X2 in the near future. Both AMD and NVIDIA are expected to have taped out their 40nm GPU designs within Q1, 2009.

Advanced Micro Devices (AMD) has sent a newsletter to its channel partners today, informing them for yet another price cut that affects the company's desktop processor line-up. Several Phenom X4, Phenom X3 and Athlon X2 processors will be 10 to 20 percent cheeper starting next month. The prices below are not the usual prices "in 1000-unit tray quantities", but approximate street prices.

AMD would be releasing its desktop 45nm CPUs, starting with two models under the Phenom II X4 banner. At this point in time, there is a great deal of uncertainty about when AMD plans to stock retailers with the new CPUs. The company's own roadmaps pointed out to a Q1 2009 launch, with several sources reporting then, that an early January launch was likely, but now it seems unlikely according to sources, who suggest these processors to stock up in March or later.

Meanwhile, a slide showing what looks like the the company's performance projections for the Phenom II X4 940, made its way to Expreview. The Phenom II X4 940 quad-core processor (Black Edition variant) would serve as the company's flagship desktop processor in the months to come, until it gets a proper AM3 refresh, and taken over by Phenom II X4 945. In the slide, the Phenom II X4 940 is pitted against two seemingly mainstream quad-core processors by Intel: Core 2 Quad Q9300 and Core 2 Quad Q9400. A percentage comparison in the gaming performance across some games and 3DMark06 is shown.

Last week, AMD stunned the computer enthusiast community by displaying the overclocking headroom the upcoming Phenom II processors could offer. Sources among channel vendors then leaked it to the press, that at least two models under the Phenom II banner await a January 8~10 launch schedule across various markets. Sources tell OC Workbench that they are very skeptical about its availability as early as in January. The sources said that they expect mass-availability of the processors only by March, or even as late as June 2009, in time for next year's Computex event.

AMD has reportedly slated two models of its Phenom II series processors for January, 2009. According to Greek website hwbox.gr, the company will be launching two high-end processors from the Phenom II X4 series, on the 9th of January. Details of these processors available at this point in time are:

• AMD Phenom II X4 940 Black Edition (HDZ940XCGIBOX), 3.00 GHz, Socket AM2+, 8 MB cache (2 MB total L2 + 6 MB L3), 125W TDP.
• AMD Phenom II X4 920 (HDX920XCGIBOX), 2.80 GHz, Socket AM2+, 8 MB cache (2 MB total L2 + 6 MB L3), 125W TDP.

There is no word on the prices, at this point, though they are expected to be "much lower" than those of the Intel Core i7.

BIOSTAR has released a partial list of its existing motherboards that will support the upcoming 45nm desktop processors by AMD. The list includes all of its current motherboards based on the AMD 7-series chipsets, NVIDIA nForce 700a series and GeForce 8200 MCP. BIOSTAR has made available the appropriate BIOS firmware for each of the motherboards in the list, that expands the CPU support. Interestingly, BIOSTAR comments on the TDP rating system AMD is about to adopt. It says that 45nm AM2+ processors carry TDP ratings of 125W, while equivalent (drawn from inference) AM3 45nm CPUs carry 95W ratings. Visit this page for links to the BIOS updates and other details.

Computing giant HP has refreshed its workstation lineup with xw9400 series models running the new AMD Opteron "Shanghai" quad-core processors. Being workstations, they come with dual-socket configurations as options, and sport Opteron 2000 series processors. Options start at a 2.00 GHz processor, and go up to 2.50 GHz. Up to 32 GB of memory can be opted for. The motherboards use NVIDIA nForce Professional 3600 or 3050 chipsets. A variety of options with NVIDIA Quadro professional graphics cards are offered. The system comes with a three-year warranty that includes parts, labor, and on-site service. A set of pre-configured systems are available by HP on its product page. Prices start at US $2,399 and can go up to $6,299.

Following the startling revelation by AMD, on just how much overclocking headroom its upcoming Phenom II processors offer, the company is on course for the announcement of the AMD Dragon enthusiast desktop PC platform. The AMD Dragon platform consists of a Phenom II X4 processor and Radeon HD 4800 series based graphics setup running on a 7-series chipset based motherboard. Earlier, a slide confidential to its channel partners was leaked to the media, showing up to 280% increments in gaming performance over its predecessor, the AMD Spider platform. Legit Reviews took a quick snap of the platform logo for AMD Dragon, showing a dark dragon with red glowing eyes holding the AMD Fusion badge. It also reveals the company's slogan for the platform: "Fusing technology with strength." Throughout the product launch phase for its 45nm Opteron processor, AMD has been largely conservative about its performance expectations, though with its desktop variants, the Phenom II series, AMD has been a little enthusiastic off late, advertising it as something "Beyond Expectations". It remains to be seen as to how far the company lives up to delivering to all the hype that has been created so far.

NVIDIA has had a fair bit of success with its MCP7A, MCP79 chipsets. Where the Intel-compatible nForce 730i/740i embeds a GeForce 9300/9400-class IGP, the AMD compatible nForce 730a embeds a GeForce 8200-class IGP. EVGA has released its offering based on the 730a (model 113-M2-E113-TR). The motherboard uses the typical EVGA colour scheme. It has an AM2+ socket, supporting the latest AMD processors with the HyperTransport 3.0 system interface.

The board features a single PCI-Express 2.0 x16 slot. It supports Hybrid Power with compatible graphics cards. Display output from its IGP comes in the form of DVI, D-Sub and HDMI connectors. It provides 8-channel audio with optical and coaxial SPDIF outputs. Depending on the processor used it supports DDR2 memory, with speeds of up to PC2-8500 (1066 MHz). The CPU is powered by a 5+1 phase power circuit. Six SATA II ports with RAID support are provided. For a complete list of specifications, please refer to the company whitepaper. The motherboard is available from the EVGA store for US $94.99 +shipping.