KLEVV at its Computex 2019 booth unveiled a new line of high-performance USB flash drives. It also brought along its latest variants of CRAS series M.2 NVMe SSDs and DDR4 memory, which come with a dazzling/blinding (take your pick) amount of RGB LED embellishment. We begin with the Portable Ghost, branded as a "portable SSD" and not a flash-drive. This is because the USB 3.1 gen 2 type-C connection pulls a PCIe/NVMe internal SSD. When plugged into a PC or a USB charger, the drive can also work as a wireless drive to your other devices over Bluetooth 4.2. The drive comes in two variants based on capacity, which significantly differ in hardware. The 240 GB variant is pulled by a JMicron JM5583 controller, while the 480 GB variant has a Silicon Motion SM2263EN. Both models use 72-layer 3D TLC NAND flash, and have the same on-paper performance figures, with up to 1,250 MB/s reads/writes. The drive isn't without two RGB LED diffusers.
The Blu RC30 is another fascinating, albeit slower drive, that's properly marketed as a flash drive. Built in the conventional 2-piece capped form-factor, the drive features a USB 3.1 gen 1 (5 Gbps) type-A connection. An internal battery which soaks up power when plugged in, lets the drive function wireless over Bluetooth 4.2, and also be used as a wireless presentation tool (a clicker), with capacitive touch surface and a couple of buttons, which imitate a mouse. Built in capacities of 32 GB, 64 GB, and 128 GB, the Blu RC30 offers sequential transfer-rates of up to 250 MB/s reads on all three models, and write-speeds rated at 40 MB/s for the 32 GB model, 50 MB/s for 64 GB, and 90 MB/s for the 128 GB model. Transfer rates are severely throttled in wireless mode. We then moved on to its SSD and memory products.