Transcend Information Inc., a worldwide leader in the manufacture of high-performance memory modules, today launched 4GB aXeRam DDR3-2000 memory kits for use with Intel's LGA1156 Core i5 and Core i7 platforms. The XMP-ready DDR3 kits are designed to operate at a blazing-fast clock frequency of 2000 MHz with an exceptionally low voltage of just 1.65V.

Featuring memory bandwidth up to an incredible 32GB/s, Transcend's new aXeRam dual-channel memory kit is rated at 2000MHz with timings of 9-9-9-24, allowing performance enthusiasts and gamers to take their Intel Core i5 platform to the next level of memory overclocking performance. The Core i5, based on Intel's new Nehalem architecture, is the first Intel processor to integrate both a 16-lane PCI Express 2.0 graphics port and a two-channel DDR3 memory controller, enabling all input/output and manageability functions to be handled by the single-chip Intel P55 core-logic.

The EVGA EVBot is a useful tool for tweakers and overclockers to maximize their system and have fun tweaking their EVGA products. With the ability to adjust on the fly voltages, clock frequencies and much more, the EVGA EVBot unleashes the full potential of your select EVGA motherboards or graphics cards! Optimistic Booster allows EVBot to take over and increase CPU frequency for a short amount of time. (ex. up 4MHz ever 4 seconds, down 3MHz every 3 seconds) This allows you to obtain the highest performance possible for a benchmark run. Simple and straight forward to use, and best of all, no drivers needed! Just plug and play.

MSI decided to rev up its high-end socket LGA-1156 motherboard lineup with the new P55-GD85. A part of this board's design seems to have been inspired from the ASUS P7P55D Premium, in which a PLX PEX8608 PCI-Express bridge chip has been used over the PCI-Express 1.1 x4 link from the P55 PCH to give out PCI-Express 2.0 x1 connections, which then drive the NEC D720200F1 USB 3.0 and Marvell 88SE9123 SATA 6 Gbps controllers on their optimal interface speeds of PCI-E 2.0 x1.

The CPU is powered by a 10-phase VRM, which is wired to four DDR3 DIMM slots. Expansion slots include two PCI-Express x16 (electrical x16/NC or x8/x8 depending on how they're populated), two PCI, and two PCI-E x1. One of these two is color-coded blue, and could be wired to the PEX8608, occupying its third port. Apart from the six SATA 3 Gbps ports the PCH provides, and the SATA 6 Gbps controller with its two ports, an additional controller provides two more SATA 3 Gbps ports and an IDE connector. Other features are standard issues for an MSI motherboard in this class: notably the OC Genie feature, centralized manual voltage measurement points, and support for both NVIDIA SLI and ATI CrossFireX.

Corsair, a worldwide leader in high-performance computer and flash memory products, today announced the launch of its new Dominator GTX ultra-high performance DDR3 memory modules for Intel and AMD platforms, designed specifically for performance enthusiasts, gamers and extreme overclockers.

Corsair Dominator GTX modules are individually screened and tested on multiple high-performance Intel X58 and P55 chipset platforms to ensure that they operate at the incredible frequency of 2250MHz at low-latency timings of 8-8-8-24 at 1.65V. They are designed specifically for performance enthusiasts and overclockers who want to achieve the highest performance possible and to break benchmark world records.

Over a month ahead of its launch, the first wave of Intel's 32 nm based Core i3 and Core i5 series dual-core processors have been listed on German online store HPM-Computer. The pricing and specifications disclosed by these listing confirm the information that surfaced as early as in July, this year. The series starts with Core i3 500 series processors whose clock speeds range between 2.93 to 3.06 GHz, and continue with Core i5 600 series dual-core processors ranged between 3.20 GHz and 3.43 GHz. While both series feature HyperThreading Technology to give the operating system four logical processors (threads) to work with, the Core i3 processors lack the Turbo Boost feature which the Core i5 chips have.

According to the new listing in which the chips are priced in Euros, the 2.93 GHz Core i3 530 processor is priced at 103.90 EUR, and 3.06 GHz Core i3 540 at 120.90 EUR. The Core i5 600 series lineup includes the 3.20 GHz Core i5 650 priced at 160.90 EUR, 3.33 GHz Core i5 660 and 661 priced at 175.90 EUR, and lead by the 3.43 GHz Core i5 670 priced at a premium 252.90 EUR point. All prices include a 19% applicable tax. The IGP clock speed (750 MHz vs. 900 MHz), differentiates Core i5 660 from 661. It is likely that the price of one of those seems to have entered incorrectly. With these processors, Intel may also introduce the Intel H57 Express chipset, and motherboards by various vendors will soon follow. These processors, however, have the same LGA-1156 socket the "Lynnfield" quad-core processors have, which are currently in the market. They may run on existing P55 Express based motherboards too, according to a recent report.

ASUS is ready with yet another socket LGA-1156 motherboard, only this one you can't pass on. The Maximus III Extreme is the company's second motherboard in its coveted Republic of Gamers series of high-end motherboards suited for gamers and overclockers, and will end up as the best ASUS has to offer for this platform. Based on the P55 Express chipset, the Maximus III Extreme seems to make use of an additional PCI-Express bridge chip to provide two x16 links. External lane switching further allows there to be four slots with x8 bandwidth. A fifth x16 slot could be wired to the PCH, being electrically x4 to accommodate other PCI-E devices.

The CPU socket is powered by a 11-phase digital PWM circuit, which uses a SuperML capacitor. The four DDR3 DIMM slots are powered by a 3-phase circuit. Apart from the main 24-pin and 8-pin CPU power connectors, there is an additional 6-pin connector. We suspect this to be a PCI-Express power connector for additional electrical stability, which could help overclocking.

Intel's is readying a hardware update for its P55 Express chipset, currently the only core-logic for the company's brand new socket LGA-1156 processor platform. The new B3 stepping of the P55 PCH will bring with it a little more than new MM number and S-spec numbers. A list of changes is as follows:

• New MM number and S-spec numbers for the converted products;
• Firmware and minor BIOS updates are required with the conversion;
• Processor MRC/microcode update required to enable future processors;
• Recommended storage driver upgrade from Intel MSM 8.9 to Intel RST 9.5.

Although it is listed that the MRC update enables 'future processors', Intel, in a statement issued to X-bit labs assured that the current B2 stepping of the chipset (found on current socket LGA-1156 motherboards) does not leave out support for any of Intel's new LGA-1156 processors that are slated for release in the very near future. The dual-core "Clarkale" 32 nm processor will be supported by both B2 and B3 steppings of the chipset.

Closely trailing the GA-X58A-UD7, Gigabyte is preparing a new high-end socket LGA-1156 motherboard based on the Intel P55 chipset. The GA-P55A-UD7 is touted to lead the new pack of motherboards under the P55A series, which bring technologies such as USB 3.0 and SATA 6 Gb/s integrated for the LGA-1156 platform. Observantly, after a very long time, Gigabyte has made use of an NVIDIA nForce chip on its high-end motherboards, certainly the first time it has made use of the nForce 200 PCI-Express bridge chip. Gigabyte made some clever use of its real-estate, especially with regards to the PCI-Express bandwidth.

The LGA-1156 socket is powered by a 24+3 phase circuit. It connects to four DDR3 DIMM slots for dual-channel memory. Its PCI-Express 2.0 x16 link is wired to an NVIDIA nForce 200 chip, which gives out 32 PCI-Express 2.0 lanes to ensure support for 3-way NVIDIA SLI, ATI CrossFireX is naturally supported. There are three PCI-Express x16 slots (which arrange into x16, x16, NC; or x16, x8, x8, depending on how they're populated). A PLX-made PCI-Express bridge chip (probably connected to the PCH) ensures full-bandwidth PCI-Express 2.0 x1 connections to the NEC two port USB 3.0 controller, and the two port SATA 6 Gb/s controller made by Marvell. Apart from the six (color-coded blue) SATA 3 Gb/s ports the PCH provides, the two color-coded white ports on the south are SATA 6 Gb/s, while the two on the north are connected to a Gigabyte GSATA2 SATA 3 Gb/s controller, which also gives out an IDE connector.

Here is one of the first socket LGA-1156 motherboards in the mini-ITX form-factor, certainly the first one based on the Intel P55 chipset. Packed in its 6.7 x 6.7 inch PCB are a 6 phase digital PWM circuit powering the CPU (socket made by LOTES), two DDR3 DIMM slots for dual-channel memory, and a decent utilization of the feature-set of the P55 PCH, which is cooled by a tiny low-profile heatsink. The PCH gives out three internal SATA 3 Gbps ports, and one powered eSATA port.

The 8-channel HD Audio also takes care of optical and co-axial SPDIF connectivity. Gigabit Ethernet, and four USB 2.0 ports make for the rest of the rear-panel. Two headers make room for four more USB 2.0 ports. The lone expansion slot is a generous PCI-Express 2.0 x16, which will accommodate any PCI-Express addon card. You will especially need it, as the P55 platform relies on discrete graphics. With its ABS II, debug LED, and rear-panel clear CMOS button, the board also tries to be as overclocker-friendly as it can afford to be, with its limited resources. Its pricing is yet to be known, though the launch isn't very far off.

Transcend Information Inc., a leading global manufacturer of memory modules, today announced shipping of a new DDR3 1333MHz memory module kit designed for Intel's latest LGA-1156 Core i5 and Core i7 platforms.

The DDR3 1333 MHz dual-channel memory kit is perfectly matched for use with Intel's next-generation desktop PC platform, Core i5. The new Core i5, which is based on Intel's new Nehalem architecture, is the first Intel processor to integrate both a 16-lane PCI Express 2.0 graphics port and a two-channel DDR3 memory controller, enabling all input/output and manageability functions to be handled by the single-chip Intel P55 core-logic.

MSI, a leading high-performance mainboard company, unveil its first gaming series mainboards in Intel P55 platform featuring awe-inspiring graphics and audio functionality to offer serious gamers immersive gaming experience.

The state-of-the-art gaming line is inspired by the mighty Big Bang. Unique and innovative, the all-new Big Bang series will deliver the shock and awe of unprecedented experiences and expand into its own collection of galaxies.

The first Big Bang branded mainboard, Trinergy is designed with eye-catching features such as NVIDIA SLI technology and QuantumWave audio processing with the latest THX TruStudio PC and Creative EAX ADVANCED HD 5.0 plus exclusive performance boost design from MSI.

ASRock introduced a new entry-level, low-cost P55DE3 socket LGA-1156 motherboard, based on the Intel P55 chipset, supporting Intel Core i5 and Core i7 "Lynnfield" processors. Its simple design employs a 4+1 phase power circuit for the CPU VRM, four DDR3 memory slots to support up to 16 GB of memory, that boast of support for DDR3-2400+ by overclocking, two PCI-Express x16 slots, of which the second (orange) slot wired to the P55 PCH and provides electrical PCI-E x4 connection, and two each of PCI-E x1, and PCI. Two of the chipset's six SATA 3 Gb/s ports are permanently assigned as eSATA, with four available internally. The CPU socket area provides mounting holes for LGA-1156 and LGA-775 coolers. Gigabit Ethernet and 8-channel HD audio make for the rest of it. The ASRock P55DE3 is selling for as little as 87 EUR.

Gigabyte's embracing new technologies such as USB 3.0 and SATA 6 Gbps in making motherboards has taken the shape of an entire series of motherboards, which intends to cover every price point the company was eying with its large socket LGA-1156 motherboard lineup. The series is designated by GA-P55A before the model identifier. The series is lead by the high-end GA-P55A-UD6, followed (in order) by GA-P55A-UD5, GA-P55A-UD4P, GA-P55A-UD4, GA-P55A-UD3P, GA-P55A-UD3R, and GA-P55A-UD3. All of these are ATX motherboards. Some of these, such as the UD4s, UD5, and UD6, are multi-GPU friendlier with PCI-Express 2.0 x16 slots that split into x8, and share 8 lanes with the next slot, while in lower models, the second PCI-E x16 slot is electrical x4, and wired to the P55 PCH. In all these motherboards, the SATA 6 Gb/s ports are two in number, and are color-coded white. Similarly, USB 3.0 ports on all these models are two in number, and color-coded blue, located on the rear-panel. These motherboards support socket LGA-1156 processors from Intel, currently available as the quad-core Core i5, and Core i7 "Lynnfield" series. It remains unclear whether all of these new models replace the existing GA-P55 series motherboards (that lack USB 3.0 and SATA 6 Gb/s) from the market, or somehow coexist at slightly higher price-points. What is certain however, is that you need to pay attention to the model names, and look out for P55A in the model names, since the rest of the nomenclature is identical. Detailed specifications are found in the specs sheets below.

Intel's socket LGA-1156 quad-core processors are closely trailed by the company's first processors based on the 32 nm manufacturing process: Core i5 and Core i3 "Clarkdale" dual-core processors. Engineering samples of these processors were evaluated as early as Q2 2009, but one of the first attempts to show the processors' overclocking potential using air-cooling was made very recently. Even prior to that, a low-voltage overclocking feat by Coolaler showed how engineering samples didn't particularly struggle reaching clock speeds close to 4.00 GHz with vCore as low as 0.832V. Romanian tech community Lab501. Lab501 community leader "Monstru" tested the overclocking headroom of a Core i5 650 LGA-1156 dual-core processor (engineering sample) with air-cooling.

The test-bed included a Gigabyte P55 motherboard, the Core i5 650 processor was cooled by a Noctua NH-U12P, onto which a Coolink SWIF 2 120P fan was strapped. A clock speed of 4.70 GHz (25 x 188 MHz) was achieved (nearly 50% over the stock clock speed of 3.20 GHz). A core voltage of 1.424V was used. A point here to note however, is that the retail Core i5 650 will come with an upwards-locked bus frequency multiplier of 24 (24 x 133 MHz = 3.20 GHz). The processor at 4.70 GHz, was Prime95-stable for over 30 minutes. With an ambient temperature of 24 °C, the two cores heated up to 77 and 68 °C, not to forget that the processor was being air-cooled. Although with the use of an engineering sample (since the retail launch of this processor is tentatively three months away), the scope for inference of this feat is limited, it gives you a coarse indication that Intel is keeping the trend of ferociously fast dual-core processors alive. High(er) overclocking headroom on air-cooling is the fruition of the 32 nm process. Slated for Q1 2010, the siblings (and cousins) of the Core i5 650 include Core i5 660/661 (3.33 GHz, HTT), Core i5 670 (3.46 GHz, HTT), Core i3 540 (3.06 GHz, no HTT), Core i3 530 (2.93 GHz, no HTT), and Pentium G6950 (2.80 GHz, no HTT). Details of the series can be found here.

In the run up for Intel's Core i5 and Core i7 "Lynnfield" socket LGA-1156 processors, it was known that Intel will be trailing the launch with a few energy-efficient variants, that come with lower rated TDPs. Two of these, namely Core i5 750S, and Core i7 860S have made it to Coolaler's lab for a quick check up. Unlike other energy-efficient variants from Intel, in the past, such as Core 2 Quad Q9550S, these parts feature lower clock-speeds compared to their standard counterparts.

The Core i5 750S comes with a clock speed of 2.40 GHz (19.0 x 133 MHz) with a Turbo Boost speed of 3.20 GHz, and the Core i7 860S runs at 2.53 GHz, with 3.46 GHz of Turbo Boost speed. Both processors as a result, have lower TDPs of 82W, compared to 95W on the Core i5 and Core i7 "Lynnfield" processors currently in the market. They are slated for Q1 2010. Coolaler used the Turbo Boost mode to overclock these chips. The Core i7 860S with its Turbo Boost multiplier of 26.0, reached 4.536 GHz (26 x 174.47 MHz, vCore at 1.32V), while the Core i5 750S reached 3.441 GHz (24 x 143.4 MHz, vCore at 1.32V). Both were seated on an ASUS P7P55D Deluxe motherboard, with one 2 GB DDR3 memory module.

Gigabyte is readying a new socket LGA-1156 motherboard, the GA-P55A-UD4. Bearing resemblance with the GA-P55-UD4, the motherboard features upgraded connectivity, with support for USB 3.0, and SATA 6 Gb/s. The new model also features an upgraded CPU VRM, with a 12+2 phase design compared to the 8+2 phase design on the GA-P55-UD4. USB 3.0 and SATA 6 Gb/s features are provided using additional controllers on board. A Marvell-made SATA 6 Gb/s two-port controller replaces the familiar Gigabyte GSATA2 controller, while an NEC-made controller provides two USB 3.0 ports on the rear-panel. The USB 3.0 ports are color-coded blue, and share the port cluster with the lone gigabit Ethernet connector, while the SATA 6 Gb/s connectors are color-coded white, next to the usual six SATA 3 Gb/s ones the P55 PCH provides.

The rest of the feature-set remains largely same, with four DDR3 DIMM slots to support up to 16 GB of memory, two PCI-Express 2.0 x16 slots (electrically x8 when both are populated) supporting ATI CrossFireX and NVIDIA SLI, Dolby Home Theater supportive onboard audio, among other standard issues. The Gigabyte GA-P55A-UD4 will not replace GA-P55-UD4 from the market, it will coexist, albeit priced higher. It remains to be seen if this is the only "P55A" motherboard Gigabyte sells.

Super Talent Technology, a leading manufacturer of Flash storage solutions and DRAM memory modules, today announced a line of 4GB dual channel DDR3 kits for Intel P55 based Core i5 and Core i7 systems in speeds ranging from DDR3-1600 to DDR3-2200.

These nine new kits were designed to deliver excellent performance in the new breed of P55 based motherboards, supporting clock speeds up to 2200MHz in the fastest Core i7 systems. Each kit is hand tested in Super Talent's factory at tuned latencies that further enhance performance.

Overclocker/Gamer and all enthusiasts will be happy about these 2x2GB DDR3 high end memory kits with high clock rate for the P55 platform. EXCELERAM stands out due to its unrivalled price for high end memory - also for these new high end kits.

EXCELERAM offers 10 years warranty for his memory throughout Europe. Fast and direct RMA processing for endcustomers is warranted through Ironstone Distribution GmbH. Handling time normally is 5 working days. All memory is 100% hand-tested on mainboards - thereby the DOA rate (Dead On Arrival) would be almost 0%.

Georgios Kopanidis - COO of EXCELERAM says: "A couple of months we weren't in the limelight. In this time we set the course to strengthen our team of memory specialists in Germany. In the next months we will announce many new great products with our well known quality. Know-how and man-power is abound. We also will put more effort into the Overclocking segment."

ASUS, the leader in innovative motherboard solutions, today unveiled the first motherboard in its newly-developed "TUF" (The Ultimate Force) Series, the SABERTOOTH 55i. The TUF Series is specially developed to meet the heavy computing demands of power users and perform well even under extreme conditions. Such computer enthusiasts often demand high-quality motherboard components and the most stable computing platforms. To achieve uncompromising stability, TUF Series motherboards have undergone a more stringent testing program than what most motherboard producers currently undertake. Solidly constructed and equipped with resilient components that have passed demanding military-style testing, the TUF Series triumphs over the harshest operating conditions to deliver robust performance. The debut SABERTOOTH 55i model, designed around a "Marine Cool" concept, incorporates the Intel P55 chipset and "tough" features to give users a supremely solid and stable computing platform.

ASUS is readying its most affordable ATX motherboard based on the Intel P55 chipset yet, the P7P55 LX. Supporting socket LGA 1156 processors, the P7P55 LX is intended to be priced even lower than the P7P55D LE (under 100 EUR). Everything about this board is thin and lite: narrower PCB, solid-state capacitors confined only to important VRM circuits, 5 phase CPU power circuit, and other basic features. The product however, doesn't leave out some ASUS exclusives such as MemOK, ExpressGate, and TurboV.

For expansion, there's one PCI-Express 2.0 x16, one PCI-E x16 (electrical x4), two PCI-E x1, and three PCI. All six SATA 3 Gbps ports are assigned as internal ports. An additional controller provides an IDE connector. 8-channel audio with optical SPDIF output, and gigabit Ethernet make for the rest of the feature-set. Expect the board to be out soon.

ASUS plans to expand its lineup of socket LGA-1156 motherboards based on the Intel P55 chipset, with a new model based on the micro-ATX form-factor. The ASUS P7P55-M packs most features of its larger siblings, making use of the P55 chipset's features. The four expansion slots include PCI-Express 2.0 x16, two PCI-Express x1, and one PCI. The P55 chipset provides six SATA 3 Gb/s ports, other standard features include 8 channel audio, gigabit Ethernet, and Firewire. ASUS exclusives include TurboV, TurboKey and Express Gate. The P7P55-M is expected to ship in mid-October.

A-DATA Technology Co., Ltd., a worldwide leading manufacturer in high-performance DRAM modules and flash application products, today announces that its XPG series DDR3 DRAM modules are fully compatible with ASUS P7P55D series and ROG Maximus III series motherboards. Once again, A-DATA has established an undisputed industry-leading position.

Moreover, in order to present the leading position and technology alliances between two major players in the IT industry, A-DATA and ASUS have demonstrated together their latest products for Intel P55 platform at ASUS P55 Technical Seminar. During this event A-DATA showcased its XPG series DDR3 DRAM modules including the Plus Series DDR3-2200+ 4GB dual channel kit, which adopts 2oz copper PCB (printed circuit board), while ASUS presented the P7P55D series and ROG Maximus III series motherboards.

Novatech Ltd, UK's leading PC and laptop manufacturer announced today the latest addition to their Elite range of PCs. Featuring the new Intel Core i5 750 2.66GHz processor and two NVIDIA graphics cards, the Novatech Elite Pro boasts incredible performance and a truly immersive gaming experience from just £999.

"The i5 offers superb performance for the price, with plenty of head room for overclocking" explained Kriss Pomroy, Commercial Director, Novatech Ltd, "however it's the Elite Pro's perfect balance of components and peripherals that makes this system so special."

ASUS, the leading provider of innovative motherboard solutions, today unveiled the ASUS P7P55 WS SuperComputer motherboard. Built around the Intel P55 Express chipset, it features the new LGA1156 socket for next-generation Intel Core i5 processors and DDR3-2133 (O.C.) memory for outstanding yet cost-effective performance. To enable multiple-GPU rendering, the motherboard supports both 3-way and 2-way graphics card configurations based on SLI or CrossFireX technology. Additionally, it leverages the NVIDIA CUDA parallel computing architecture to support three NVIDIA Tesla cards and one NVIDIA Quadro card for 250 times more computing power.

Mushkin Enhanced, a global leader in high-performance computer products, announced today a series of memory kits for LGA 1156 motherboards.

Specially designed for Intel Core i5 7-series and Intel Core i7 8-series platforms, these kits provide astonishing performance while using a safe 1.65V supply voltage. Enabling low latency settings and higher frequency, ideal performance is a given with these modules, regardless of application type.