Montech, a new enthusiast PC Case, Power and Cooling solutions brand based in Taiwan introduces their new Fighter 400 and Fighter 600 line of competitively priced gaming cases. Both mid-tower ATX cases come with tempered glass side panels. The Fighter 400 comes with a pre-installed 120 mm Blue LED rear fan, while the Fighter 600 comes 3 front 1 rear 120 mm Rainbow LED fans.

Aimed at the highly competitive budget gaming case range, both the Fighter 400 and Fighter 600 comes with all the bells and whistles of higher end alternatives. Both cases comes with full Tempered Glass side panels to show off your RGB peripherals, not to mention both cases comes with pre-installed 120 mm LED fans! For the Fighter 400 you get a 120 mm blue LED rear fan and with the Fighter 400 you get a total of 4 120 mm Rainbow LED fans. Designed for maximum airflow and performance, both cases include top and bottom dust filters to keep cooling and also dust in check. Industry standard front USB 3.0/2.0 I/O ports are also present, as well as a shielded PSU compartment, cable management ports, support for 120/240 mm radiators on the Fighter 600 and 120/240/280/360 mm radiators on the Fighter 400.

G.SKILL International Enterprise Co., Ltd., the world's leading manufacturer of extreme performance memory and gaming peripherals, is excited to announce an all-new high-capacity, low-latency DDR4-3200 CL14-18-18-38 memory kit specification based on 32 GB modules across the Trident Z RGB, Trident Z Royal, and Trident Z Neo series. Available in 256 GB (32GBx8), 128 GB (32GBx4), and 64 GB (32GBx2) kit capacities for quad-channel and dual-channel platforms, these new DDR4 memory specifications are built with the latest high-density 16Gb components and provide the perfect mix of extreme performance and high memory capacity.

DDR4-3200 CL14 has always been the ultimate sweet spot for performance since the early days of DDR4 memory, and G.SKILL is now bringing the legendary high-performance efficiency to the latest 32 GB high-capacity DDR4 modules. Designed for the latest HEDT platforms with quad-channel support, the DDR4-3200 CL14-18-18-38 specification with 256 GB (32GBx8) memory kit capacity can be seen validated in the screenshots below with the new Intel Core i9-10900X processor on the ASUS ROG RAMPAGE VI EXTREME ENCORE motherboard and the Intel Core i9-10940X processor on the MSI Creator X299 motherboard.

EK, the European premium liquid cooling gear manufacturer, is releasing the eagerly awaited AMD AM4 socket based monoblock belonging to the Quantum Line of products, the EK-Quantum Momentum Aorus X570 Elite D-RGB. This monoblock is engineered specifically for the Gigabyte X570 Aorus Elite motherboards. The addressable D-RGB LED in the monoblock is compatible with RGB Fusion 2.0 Sync RGB control and offering a full lighting customization experience for every single diode at any given time.

This is a complete all-in-one (CPU and motherboard) liquid cooling solution for Ryzen AMD processors and the monoblock is compatible with the AM4 socketed Gigabyte X570 Aorus Elite motherboard.

DeepCool today released the GAMMAXX GT ARGB, a refresh of the GAMMAXX GT RGB CPU cooler from 2017. The new GT ARGB, as its name suggests, implements modern addressable-RGB lighting with a 3-pin ARGB connection. The fan takes in 4-pin PWM to spin. DeepCool also used the opportunity to change the design of the top-plate of the fin-stack. It now comes in matte-black, with an illuminated DeepCool company logo. The included 120 mm fan is also updated (besides the ARGB illumination). It now spins at speeds of up to 1,650 RPM (the original's fan spun at up to 1,500 RPM), although the max airflow rating is reduced to 64.5 CFM (compared to 70 CFM of the original).

The GAMMAXX GT ARGB is a conventional tower-type CPU cooler featuring an aluminium fin-stack heatsink to which heat is conveyed by four 6 mm-thick copper heat-pipes that make direct contact with the CPU at the base. An included 120 mm fan ventilates the fin-stack. Among the CPU socket types supported are AM4, LGA115x, and LGA2066. Measuring 129 mm x 77 mm x 157.5 mm (WxDxH), the cooler weighs 676 g (including fan). The company didn't reveal pricing.

Cooler Master updated the MasterLiquid ML360P premium AIO liquid CPU cooler with a new Silver Edition variant that sees a silver-gray color-scheme dominate the radiator, tubing sleeves, and the pump-block. Rather than including three 120 mm fans, Cooler Master packs a 3x 120 mm compound-fan. ARGB LED illumination dominate the three fans and subtle lighting accents on the pump-block. You can use a single 3-pin ARGB connection to control lighting of the entire cooler, or use the included LED controller that lets you customize color, and cycle between lighting presets.

Each of the three 120 mm fan subunit spins at speeds of up to 1,800 RPM, pushing up to 45 CFM of air, with noise output ranging between 8 to 30 dBA. The cold-plate is made of copper, and the radiator aluminium. The MasterLiquid ML360P supports nearly all modern CPU socket types, including AM4, LGA115x, LGA2066, TR4, and sTRX4. For Threadripper sockets, you need to use the round AIO retention module AMD includes in the box of all retail Threadripper processors. The company didn't reveal pricing.

he leading global motherboard, graphics card and mini PC manufacturer, ASRock, launches the Radeon RX 5500 XT Phantom Gaming D 8G OC graphics card - as the latest member of the ASRock Phantom Gaming series graphics card product line, equipped with AMD 's 2nd generation 7nm Radeon RX 5500 XT GPU, 8 GB 128-bit GDDR6 video memory, and support PCI Express 4.0 bus standard, as well as the new dual fan design with Phantom Gaming appearance, brilliant Polychrome SYNC lighting effect synchronization, and the stylish metal backplane. The advanced specifications and rich functions bring gamers an outstanding 1080p gaming experience.

EK, the premium liquid cooling gear manufacturer based in Europe, is releasing a new Quantum Line of genuine D5 pump based combo units. These units are a revolution and an upgrade of the market-proven design used in the old EK-XRES Revo generation of pump-res combos since the new units have twice as much ports. EK-Quantum products come with sophisticated 5 V addressable D-RGB LEDs which can be controlled through your motherboard RGB control software or the upcoming EK-Connect controller unit.

The most popular cylindrical pump-res combo on the market is redesigned, upgraded and is better in every way. The top is now featuring three G1/4" ports, one of which has a pre-installed nickel-plated brass internal tube which helps to prevent the splashing of the coolant inside the reservoir if the top is to be used as an inlet. This reduces the chances of air being sucked in by the pump and foaming of the coolant as well. Any of these ports can also use used for filling the system or adding additional upcoming accessories (thermal probes, LEDs, etc.)

Sapphire's upcoming take on AMD's RX 5500 XT graphics card has been spotted up for preorder on Amazon (availability set for December 12th), and it's a special one. Besides the usual Nitro+ edition, Sapphire will also be launching a fully customized RX 5500 XT Nitro+ Special Edition. Besides addressable ARGB fans, the card features what can be called a very interesting, reduced PCB design, with the shroud and backplate artificially adding length to the graphics cards so as to increase space for the dual fan cooling solution.

DIYPC partners with TechPowerUp to give our readers from the US a chance to bring home a DIYPC S2-BK-RGB Black PC case. This ATX mid-tower case covers all the essentials to build a contemporary game PC build, including a RGB LED embellishments across the front panel, tempered glass side panel, room for graphics cards up to 37 cm in length, and dust-filters for the intakes and top fan vents. We're giving two of these cases away. To drop your hat in the ring, all you need to do is fill up a short form that helps us get back to you if you've won. Entries close December 16th.

For more information and to participate, visit this page.

Cougar today launched the Conquer 2, a premium ATX full-tower chassis it unveiled at Computex 2019. It features a "chassis within chassis" design, in which an inner SECC steel chassis holds all your components and slides into the outer chassis that has the case's industrial design that combines aluminium and tempered glass panels. Massive ARGB LED diffusers dominate the front portion. The inner chassis has a horizontally-partitioned layout. The upper compartment has the motherboard tray with room for CEB, ATX, and smaller motherboard form-factors. You get room for graphics cards up to 40 cm in length. There are 10 expansion slots in all, from which two are vertical.

The bottom compartment houses the PSU bay with up to 22 cm headroom; and two 3.5-inch drives. Two additional 2.5-inch drives can be mounted behind the motherboard tray. Cooling options include two 120 mm front intakes that can hold onto a 240 mm radiator, and three 120 mm top exhausts, which can hold a 360 mm radiator. Measuring 368 mm x 631 mm x 744 mm (WxHxD), the case weighs about 18 kg. The company didn't reveal pricing.

Patriot Memory, under its Viper Gaming brand announced the VPR100 RGB line of M.2 NVMe SSDs. Built in the M.2-2280 form-factor, the drive features a wide heatspreader with RGB LED embellishments. You can play with the lighting not just with the Viper RGB app, but also popular lighting software such as ASUS Aura Sync RGB, MSI MysticLight, GIGABYTE RGB Fusion, etc. The drive takes advantage of the PCI-Express 3.0 x4 host interface with NVMe 1.3 protocol. Patriot is kind and brave enough to disclose that enabling RGB LED sync lighting can decrease read/write speeds by up to 20-30 percent. Leaving them unsynchronized (following a preset) leaves drive performance untouched.

Available in 256 GB, 512 GB, 1 TB, and 2 TB capacities, the VPR100 RGB combines a Phison E12-series controller with 3D TLC NAND flash memory, cushioned by a DRAM cache. All four capacity variants offer sequential read speeds of up to 3,300 MB/s, but write speeds vary. The 256 GB model offers up to 1,000 MB/s, the 512 GB model up to 2,100 MB/s, and the 1 TB and 2 TB models up to 2,900 MB/s. Endurance figures (TBW) for the four models are 380 TB, 800 TB, 1,600 TB, and 3,115 TB, respectively. Backed by 5-year warranties, the 256 GB, 512 GB, 1 TB, and 2 TB variants of the VPR100 RGB are priced at 74.90€, 119.90€, 189.90€, and 379.90€, respectively (including VAT), in the EU. Across the big pond, they're priced at USD $94.99, $134.99, $229.99, and $399.99, respectively.

EK Water Blocks, the Europe-based premium computer liquid cooling gear manufacturer is releasing a 140 mm D-RGB version of its EK-Vardar fan - the EK-Vardar EVO 140ER D-RGB. Besides the new and advanced addressable lighting diodes, the new fan also incorporates the Extended Range (ER) of the PWM operation feature and the special Start-Stop function which brings a true 0 dB experience for the absolutely silent operation. Not only will you be able to enjoy a totally silent PC, but this feature is also very useful for preventing radiator dust buildup if your PC is idling for prolonged periods of time, and it also extends the lifespan of the fan itself.

The EK-Vardar RGB is a high-static pressure computer cooling fan, designed and built primarily for high-performance computer liquid cooling systems. The Vardar family of cooling fans carries the notorious name of a type of the cold northwesterly wind blowing from the mountains down to the valleys of Macedonia. They feature a black square frame that does not allow for the air to escape and ensuring optimal airflow through the radiator.

Korean PC cooling major Zalman released the CNPS20X and CNPS17X air coolers with RGB LED embellishments. The CNPS or computer noise prevention system line of CPU coolers from Zalman consist of the most outlandish and off-beat heatsink designs, and it's no different with the CNPS20X and CNPS17X. The CNPS17X has a solo fin-stack heatsink with one included fan, while the CNPS20X is a dual fin-stack heatsink with two included fans. Both coolers feature a small quantity of pure copper fins in addition to aluminium fins. The copper fins are positioned toward the center of the stack.

Both coolers include an RGB LED-embellished variant of the ZM-SF140, a 140 mm fan with split-blade impellers designed to increase air-flow. The fans spin between 800 to 1,500 RPM, pushing up to 63 CFM of air, with noise output ranging between 16.5 dBA to 28 dBA. An X-shaped form along the fan-frame holds clear acrylic diffusers for the RGB LEDs. The heights of both coolers are capped at 16 cm, which should make them kosher for most contemporary mid-towers cases. Among the CPU socket types supported are AM4, LGA115x, and LGA2066. The CNPS17X is rated for thermal loads of up to 200 W, while the CNPS20X is claimed by its makers to be fit for 300 W. Available in the EU, the CNPS17X is priced at 60€, while the CNPS20X goes for 80€.

The EK Velocity sTR4 series water blocks that are specifically designed for HEDT AMD Ryzen Threadripper processors are compatible with all newly released AMD TRX40 based motherboards equipped with socket sTRX4 which supports Ryzen Threadripper 3000 Series Processors.

With the release of 32 core count HEDT computer processors and potential for even more cores, the requirement for the top of the line cooling has never been bigger. The sTR4 Lineup of EK-Velocity water blocks, designed for the sTR4 socket, is perfectly compatible with the newly released AMD TRX40 motherboards that are using the sTRX4 socket. The only difference between the sTR4 and sTRX40 sockets is the pin layout, thus it has no effect on the cooling performance or the mounting itself.

GIGABYTE today unveiled the C200 Glass ATX mid-tower case (model: GB-C200G). The case is characterized by a tempered glass panel dominating much of the front panel, besides a full-size left-side glass panel. A vertical RGB LED embellishment runs along the front-panel. The front panel intakes are along the sides of the front panel, and feature coarse filters. A finer detachable dust-filter covers the top exhaust. Inside, the C200 Glass features a conventional horizontally partitioned layout.

The top compartment of the C200 Glass has room for ATX (or smaller) motherboard form-factors, graphics cards up to 33 cm in length, and CPU coolers up to 16.5 cm in height. The bottom compartment has room for PSUs up to 17 cm in length, and two 3.5-inch drive trays, which can each hold smaller 2.5-inch drives. There are two additional 2.5-inch mounts along the motherboard tray, in the upper compartment. Ventilation includes 3x 120 mm or 2x 140 mm front intakes, 2x 120 mm top exhausts, and a 120 mm rear exhaust that has a factory-fitted fan. You can mount a 360 mm or 280 mm radiator in the front, a 240 mm radiator along the top, and a 120 mm radiator at the rear. Front-panel connectivity includes two USB 3.x type-A ports, HDA jacks, and a button to cycle through lighting presets for the LED diffuser. Measuring 514 mm x 277 mm x 523 mm (HxWxD), the C200 Glass dry-weighs 7.24 kg. The company didn't reveal pricing.

We live in strange times, with GALAX releasing HOF Black Edition graphics cards, and now ASUS dishing out an ROG Strix White Edition. Unlike GALAX, ASUS limited its whitewash to the cooler shroud, the fan impellers, the back-plate, and even the various internal cables (fans, lighting, etc.,) while leaving the PCB black. The cooler shroud has RGB LED embellishments at the same spots as the original ROG Strix RTX 2080 Ti, so you can play with color.

The card ships with 1770 MHz GPU Boost frequency, and an untouched 14 Gbps (GDDR6-effective) memory. The GPU Boost frequency in particular is significantly higher than the 1650 MHz of the ROG Strix RTX 2080 Ti O11G, and closer to the 1800 MHz that the ROG MATRIX RTX 2080 Ti ships with. The ROG Strix RTX 2080 Ti White Edition is priced at 1,600€ (including taxes).

CORSAIR, a world leader in PC gaming peripherals and enthusiast components, today announced a range of products including liquid CPU coolers, high-frequency DRAM, and efficient power supplies fully tested and validated for compatibility with the new 3rd Generation AMD Ryzen Threadripper high-end desktop processors. With the highest core and thread count on the HEDT market, combined with the lightning-fast PCI-Express 4.0 platform, AMD's most powerful desktop processor can create, composite, render, encode, and deliver with unprecedented multitasking power - and CORSAIR is ready with the widest range of guaranteed-compatible products to help get the best performance out of a new Ryzen Threadripper-based PC.

HyperX, the gaming division of Kingston Technology Company, Inc., today introduced a new addition to its award-winning lineup of gaming keyboards - HyperX Alloy Origins Core. Featuring HyperX Red mechanical switches, the new keyboard is built for performance and longevity with a shorter actuation point and 80 million click rating.

Alloy Origins Core maximizes desktop real estate with a space-saving tenkeyless layout for ultimate mouse movement. The keyboard features RGB exposed backlit keys for brighter illumination with radiant lighting effects and five adjustable brightness levels to enhance gaming, day or night. For added durability, stability and flexibility, Alloy Origins Core is built with a full aircraft-grade aluminium body and the USB Type-C to USB Type-A keyboard cable is detachable.

CORSAIR, a world leader in PC gaming peripherals and enthusiast components, today announced that its industry-leading CORSAIR iCUE software is now available for macOS, unlocking the full potential of CORSAIR mice, keyboards, headsets, and more for Mac users. Available as a free download, iCUE enables users to completely personalize their peripherals - increasing productivity, customizing aesthetics, improving gaming performance, and more.

iCUE for macOS features support for CORSAIR RGB keyboards, mice, headsets, and accessories when used on Mac, such as the award-winning K70 RGB MK.2 mechanical keyboard and the iconic M65 RGB ELITE optical gaming mouse. CORSAIR iCUE for macOS also supports all currently shipping CORSAIR headsets, including the newly released VIRTUOSO RGB Wireless, as well as accessories such as the MM800 RGB POLARIS RGB mouse pad and ST100 RGB premium headset stand.

LIAN LI Industrial Co. Ltd., a leading manufacturer of aluminum chassis and PC accessories, is proud to announce the LANCOOL II, a revised and improved version of its popular LANCOOL ONE. Available in black and white, the LANCOOL II is packed with features designed to make the user's building experience as pleasant as possible, such as four flip panels, modular cable cover plates, and an adjustable drive bay, all the while providing a clean and modern look with front panel RGB effect and tempered glass on both sides of the case.

When building a PC, easy access to all the compartments is key. Not losing or breaking the thread of important screws is also a good advantage. That is why the LANCOOL II is equipped with hinged tempered glass panels as well as two metallic shroud panels on both the right side and left side of the case, all magnetic, eliminating the need for unnecessary screws. While the tempered glass panels provide a great view to the piece of art that is your PC, the shroud panels provide easy access to the PSU's cable for easier management without having to remove any parts to get to it. It also provides quick access to your HDD cage, and for an added benefit, the glass panels can easily be lifted off their hinges to prevent any damage while building the PC.

The EVGA NU Audio Card reintroduced the PC world to high-end audio, both stunning the audio world and making new fans along the way. The singular idea of producing Lifelike Audio and Gaming at an affordable price led to an exclusive partnership between one of the world's most recognizable PC hardware manufacturers and one of the true icons of the audio world - Audio Note (UK).

The NU Audio Pro Cards change the game once again. The pursuit of audio perfection on a PC takes another step forward with the introduction of a 7.1 Surround solution by EVGA and Audio Note. We took the solid foundation of the NU Audio Card, improved the component selections throughout, and matched it to a secondary card to provide surround support. The result is an experience where critical listening sessions can yield to enjoyment, and where thinking will surrender to feeling.

DeepCool rolled out the GH-01, a graphics card reinforcement stand that you install inside your tower-type case, to minimize PCB bending over time (a vastly exaggerated phenomenon). But wait, it does more: the stand has an RGB LED embellishment along its length, and has space to route your graphics card's power cables. Up to two 8-pin PCIe power cables can be routed. You use a thumb-screw and notches to adjust the GH-01's VGA support height from 47.2 mm to 154 mm. The stand itself measures 52.6 mm x 60.6 mm x 163.73 mm (WxDxH). It can bear a load of up to 5 kg. There are two sub-variants of the GH-01 based on the illumination type. The GH-01 RGB uses old-school RGB lighting through 12 V 4-pin RGB control. The GH-01 LED, on the other hand, uses more modern 5 V addressable-RGB over a 3-pin connector. The company didn't reveal pricing.

NEC today announced the launch of the MultiSync PA311D, a new 31-inch IPS wide color gamut display with a 4K (4096x2160) resolution. "The MultiSync PA311D will take its place as our flagship monitor in the PA Series of professional desktop displays," said Kevin Christopherson, Director of Product Marketing at NEC Display Solutions. "It provides higher resolution, along with better black levels and contrast. Further, the PA311D includes USB-C connectivity with 65 W charging and several new cutting-edge features to meet the color-critical needs of professional graphic designers, photographers and video producers."

In September, Sapphire unveiled its most powerful graphics card to date - the SAPPHIRE NITRO+ RX 5700 XT - which delivers amazing 4K and 1440p performance, but also features very advanced RGB customization options. We even created a set of SAPPHIRE ARGB Fans specifically for this card (sold separately), so you could illuminate your system even more. Since then, many of you have asked if we could include the ARGB Fans with the card itself. oday we are ready and excited to announce the SAPPHIRE NITRO+ RX 5700 XT SPECIAL EDITION! Not only does it include the SAPPHIRE ARGB Fans out of the box, but we've increased the card's performance even more.

Here's the first picture of the Radeon RX 5700 XT Liquid Devil by PowerColor. This premium graphics card is meant for people with DIY liquid-cooling setups, and comes with a factory-fitted full-coverage water-block. Sourced from EK Water Blocks, the cooling solution features a nickel-plated copper primary material, with an acrylic top and PowerColor-exclusive embellishments, which include a factory-fitted RGB LED setup. The card is 2-slot thick at the rear I/O. Under the block is a PCB similar in design to the air-cooled RX 5700 XT Red Devil graphics card. Its clock speeds and price are still under the wraps. We expect a price that's north of $500 given the cost of the block alone.