Raijintek today introduced the Pallas 120 RGB, a refresh of the original Pallas from 2014. Raijintek has made four key changes to its design. To begin with, the mirror finish nickel-plated copper base from the original has been replaced with a direct-touch base, where the cooler's six 6 mm-thick copper heat pipes make direct contact with the CPU. The second big change is the black coated aluminium fin-stack and heat-pipes, which offer a matte appearance. Thirdly, the change reflecting the namesake - the fan featuring RGB LED illumination using 10 diodes (4-pin standard RGB header); and lastly, support for newer sockets AM4 and LGA2066, in addition to LGA115x and AM3+.

The C-type heatsink offers a height of just 68 mm, making it perfect for low-profile builds, provided you can find room around the CPU socket for the cooler's vast width and depth. Measuring 130 mm x 146.8 mm x 68 mm (WxDxH), it weighs 550 g, including the fan. The fan specs are mostly unchanged from the original. Drawing power from a 4-pin PWM header, and featuring a hydraulic bearing, it spins between 200 to 1,400 RPM, pushing up to 41.71 CFM of air, with a maximum noise output of 28.43 dBA. The company didn't reveal pricing.

Raijintek today introduced the Juno Pro RBW, a low-profile air CPU cooler and successor to the Juno-X RGB from late-2017. While the Juno-X RGB only featured a multi-color fan strapped onto the original Juno-X heatsink, the new Juno Pro RBW features a more substantial redesign, with a metal shroud crowing the upper portion of the heatsink, and a silicone RGB LED diffuser ring framing the shroud. The lighting system conforms to the newer addressable-RGB standard, so you can control it using various motherboard branded lighting control software.

Under the hood, the heatsink is unchanged from the Juno-X: a radially-projecting aluminium fin-stack that's bunched up at the center, making up the base that makes contact with the CPU, which is ventilated by a 120 mm PWM fan that spins between 400 to 1,800 RPM, pushing up to 38.5 CFM of air, with a noise output of 28 dBA. Measuring 122.5 mm x 122.5 mm x 65 mm (WxDxH), it weighs 315 g. The cooler is capable of handling thermal loads of up to 105W TDP. Among the CPU sockets supported are LGA115x and AM4. The company didn't reveal pricing.

Raijintek today announced the Ophion and Ophion EVO cases. The Raijintek Ophion and Ophion EVO are two impressive M-ITX cases that are not only affordable at just £119.99/£129.95, but more importantly offer a range of features not often seen in small form factor cases.

The Ophion and Ophion EVO can accommodate a full size 330mm GPU alongside a standard ATX power supply, with the Ophion EVO even supporting top mounted 240mm AIO coolers in a case that's just 17.4cm wide. The case itself has a brushed aluminum front panel alongside two tool-less tempered glass side panels; It also includes a full speed PCIe 16x Riser Cable.

Raijintek at Computex 2018 showcased two true tower coolers and a low profile solution that stood smaller besides them. The MYA RBW and the Delos RBW stood tall in their RGB tower greatness, while the Pallas Micro stood true to its name, showcasing compact cooling performance in tight quarters.

The MYA RBW is Raijintek's coup-de-grace in the tower cooler camp, and features a 6x 6 mm heatpipe design with the usual radiator fin design, which feature specially-designed grooves to virtually increase turbulence and heat dissipation area. Raijintek say the MYA RBW can handle up to 250 W TDPs with its dual-fan-supporting design, and should be compatible with all AMD and Intel systems.

Raijintek introduced the Antila D5, a pump+reservoir combination device with a cylindrical reservoir measuring ⌀64 mm x 205 mm (H), and an integrated pump that can push 900 l/h, with a maximum pressure of 50 psi, and a 4 m (13-feet) head-lift. The reservoir is made of POM + PMMA clear acrylic. Taking in 4-pin PWM input, the pump's impeller spins between 1,800~4,500 RPM, with a noise output of up to 30 dBA. The complete assembly measures 87.4 mm x 280.6 mm x 91.2 mm, dry-weighing 790 g. The company didn't reveal pricing.

Raijintek today rolled out the CWB-RGB, a nickel-plated copper CPU water block with a frosted acrylic top, which acts as a diffuser concealing 12 addressable RGB LEDs. The block includes an RGB LED controller module that draws power from a SATA-power connector, and lets you toggle between 184 lighting presets. The block has a mirror finish in its business end. It supports standard G1/4" fittings. Measuring 94 mm x 77 mm x 26.1 mm (WxDxH), it weighs around 180 g. The addressable RGB LEDs can also be plugged into a 4-pin RGB header. Most modern CPU socket types are supported, including AM4, AM3(+), FM2(+), LGA2066, LGA2011(v3), and LGA115x. The company didn't reveal pricing.

Raijintek's latest release the ZOFOS EVO is a case which has been designed to be practical; featuring the latest sound insulation, magnetic covers and the option for either a fully enclosed or windowed case. This full tower case supports up to EE-ATX motherboards, 470mm GPUs and up to three 360mm radiators for a comprehensive gaming system.

Raijintek today introduced the Iris 14 Rainbow RGB 140 mm fans, the larger siblings of the Iris 12 Rainbow the company launched last year. These fans feature circular frames, and RGB LED diffusers along the perimeters of the frames. These diffusers project light from 21 diodes onto the frosted, translucent impeller. Raijintek is selling these fans in single-unit, 2-pack, and 3-pack SKUs. The fans feature hydraulic bearings, take in 4-pin PWM input, spin between 400 to 1,500 RPM, pushing up to 61 CFM of air, with a noise-output of up to 30.8 dBA. The lighting mechanism takes in standard 4-pin RGB headers. The 2-pack and 3-pack SKUs include a 6-port RGB LED hub and an RF remote-control. The company didn't reveal pricing.

Raijintek today introduced the Macula 12 Rainbow RGB 120 mm fan, which will be sold in sets of 2 and 3. The fan is characterized by acrylic LED diffusers both both sides of the frame, even as the supporting structure of the frame, and the impeller itself, are matte black. A control pod and custom LED controllers are included with the sets, which lets you choose from 300 lighting presets, or choose a custom color from a 256-color palette. As a fan, the Macula 12 features sleeved bearings, takes in 4-pin PWM power input, spins between 800 and 1,800 RPM, pushing up to 56 CFM of air, with a maximum noise output of 25 dBA. Its makers rate its MTBF at 40,000 hours.

The Orcus and Orcus Core RGB models are Raijinktek's latest release of AiO water cooling solutions. The 240 mm radiator of the Orcus RGB is cooled by two IRIS 12 fans, with it's main improvement from the previous Triton series being the external pump which allows more flexibility when installing the heatsink on the CPU.


The Orcus RGB 240mm AIO - £99.95
The Orcus and Orcus Core RGB models are Raijinktek's latest release of AiO water cooling solutions. The 240 mm radiator of the Orcus RGB is cooled by two IRIS 12 fans, with it's main improvement from the previous Triton series being the external pump which allows more flexibility when installing the heatsink on the CPU.

The JUNO-X is a small, compact, and light CPU cooler that is ideal for HTPCs and other small computers with its max TDP of 70 Watts. The "radial"-style used is reminiscent of a successful cooling concept from Zalman, except in this version it is made entirely out of aluminum and its powerful 92 mm PWM fans are surrounded by the cooler fins.

COMPACT RADIAL-STYLE CPU COOLER
The Raijintek Juno-X consists of a heatsink whose aluminium fins form a ring around a slowly-turning 92 mm PWM fan. This arrangement also allows the surrounding motherboard components to receive cooling. Thanks to its low 50 mm height, the Juno-X is primarily designed for use in low-profile cases that offer limited space.

Raijintek today introduced the Leto Pro RGB CPU cooler. An upscale variant of the Raijintek Leto launched earlier this year, the Leto Pro RGB retains the essential tower-type heatsink design of the original Leto, but comes with two 120 mm RGB LED-illuminated fans in push-pull configuration. Each of the two included Raijintek Macula 12 RGB fans spins between 800 to 1,800 RPM, pushing up to 56 CFM of air, with a noise output of 25 dBA. Raijintek has also launched the Leto RGB, which is the original Leto with a single Macula 12 RGB fan. With both its fans installed, the Leto Pro RGB measures 127 mm x 101 mm 155 mm (WxDxH), weighing 925 g. It supports nearly all modern CPU socket types, including AM4, AM3(+), FM2(+), LGA2066, LGA2011(v3), and LGA115x.

The UK based independent game publisher, The Irregular Corporation, is pleased to announce that RAIJINTEK, PC hardware manufacturer, have joined the PC Building Simulator project as a partner. At launch, players will have the option to build PCs in-game using RAIJINTEK's popular range of air and liquid coolers plus an assortment of cases, all, lovingly recreated using 3D graphics and fully functional within the simulation.

Mr. Steve Shih, GM of Raijintek Co. Ltd in Taiwan at RAIJINTEK said "We're delighted that players will be able to experiment with Raijintek components in PC Building Simulator! This will be a great tool for people who are keen to build their own PC, but unsure where to start.".

Raijintek have just release three new cases for their tempered glass series: the Coeus Elite, Coeus Evo, and Paen M. The Paean M is Raijintek's first watercooled open bench case. All three cases feature up to four individual panes of 4.0 mm tempered glass giving a great view to their new range of LED fans. In addition to the three new cases, Raijintek have also announced the PAXX conversion kit consisting of a riser card extender cable and a special PCI slot bracket.

Raijintek today introduced the Iris 12 Rainbow RGB 120 mm case-fans. Taking in 4-pin PWM input, these fans spin between 800 to 1,800 RPM, pushing up to 42.17 CFM of air, with a noise output of up to 26.5 dBA. The fans feature hydraulic bearings, and are rated for 40,000 hours of operation. With its vital specs out of the way, the centerpiece is the RGB LED lighting. The inner wall of the fan's frame acts as a diffuser for the 15 RGB LEDs it's studded with. The LEDs in the Iris 12 can make up to 256 colors, each. The fan features a standard 4-pin RGB input. The fan comes in single piece, two-pack, and three-pack SKUs, with the latter two including an RGB LED control hub, that comes with an IR remote control. The company didn't reveal pricing.

Raijintek today introduced the Coeus EVO mid-tower chassis. Characterized by 4 mm-thick clear tempered glass panels along both its sides, the front, and top panels; this case features a cyberpunk design with SECC steel making up the main frame and motherboard tray, along which the glass panels are bolted on. Internally, the case features a conventional horizontal dual-compartment layout, with the larger top compartment holding the motherboard tray, and the enclosed bottom one holding the PSU and a few drive bays.

The Coeus EVO offers room for graphics cards as long as 350 mm, CPU coolers as tall as 175 mm, and PSUs as long as 200 mm. Storage options include four 3.5-inch and two 2.5-inch drive bays. Its fan mounts include either three 120 mm or two 140 mm front intakes; two 140/120 mm top exhausts; and a 120 mm rear exhaust. You can mount 360 mm x 120 mm or 280 mm x 140 mm radiators along the front, and 240 mm x 120 mm radiators along the top. Front panel connectivity includes one USB 3.0/3.1 type-C port, two USB 3.0/3.1 type-A ports, and HDA audio jacks. Measuring 235 mm x 444 mm x 544 mm (WxDxH), the case weighs about 12.2 kg. The company didn't reveal pricing.

Raijintek today introduced the Juno X top-flow CPU cooler. A throwback to the heatsink-designs of the early-2000s, the Juno X features an aluminium fin-stack that has been bunched up in the middle to make the base, with the ends of the fins projecting radially; and two 6 mm-thick nickel-plated copper heat pipes fast-tracking heat transfer from the base to the peripheries of the fins. The cooler comes in four variants based on the color of its fan's LED illumination, red, green, and blue, and no-illumination.

The factory-fitted 92 mm fan takes in 4-pin PWM power input, and spins between 1,200-2,500 RPM, pushing up to 52 CFM of air, with a noise output of 26 dBA. Measuring 110 mm x 110 mm x 50 mm (LxWxH), the cooler weighs about 130 g, and can handle thermal loads of up to 70W TDP. The cooler supports most modern CPU sockets, including AM4, AM3(+), FM2(+), LGA115x, and LGA775.

Raijintek took to the stage to showcase, among other products, their Orcus AIO. Water cooling is all the rage these days, and the company is hoping this 240 mm unit will be the one to sway you to their camp. A rotating blade is included in the design, which rotates according to the waterflow of the system. LED lighting pimps the reservoir, which they call "the heart" of the system, and Raijintek is also calling to your attention the "extremely polish surface of water block". The fans on the radiator also include LED lighting, and the pump makes use of both a graphite pipe and a ceramic axis. The fans can speed at up to 3800 RPM, give or take 10%.

Raijintek today introduced the Aura 12 RGB case fans. These 120 mm fans are characterized by RGB LED lighting projected onto the impeller by an LED diffuser running along the bore of the frame. The RGB LED setup can produce up to 256 colors, which can be configured using the included control module. This module can also set lighting modes.

The impeller of the Raijintek Aura 12 RGB features a variable angle fan-blade design that is said to improve airflow. The fan features hydraulic bearing. The fan takes in input from the control module over a proprietary 6-pin connector, and spins at speeds of up to 1,200 RPM, with up to 39.8 CFM airflow, and a maximum noise output of 24.8 dBA. The frame features rubber padding along the mount holes to absorb vibration. The fan is also available in packs of three, sold as the Aura 12 RGB-3. This package includes a control module with three outputs. The company didn't reveal pricing.

Raijintek today introduced its Leto line of tower-type CPU coolers. Available in three variants based on the color of the LED illumination - Leto W (white LED), Leto R (red LED), and Leto B (blue LED), the cooler features a conventional tower-type design, with a matte black anodized aluminium fin-stack. The base is made of anodized aluminium too, although three 8 mm-thick copper heat pipes make direct contact with the CPU. The heat pipes feature black nickel-plating, and are pressed against the aluminium fins using a patented process that lacks solder.

The included 120 mm fan features a custom-design frame, and sleeve-bearing. It takes in 4-pin PWM input, spins between 800 to 1,800 RPM, pushing up to 67 CFM of air, with a noise-output of up to 29 dBA. Rubber mounts hold the fan onto the heatsink, which supports a second 120 mm fan for push-pull ventilation. Measuring 122 mm x 76 mm x 157 mm, the heatsink weighs 570 g. The Raijintek Leto supports most modern CPU socket types, including AM4, AM3(+), FM2(+), LGA2011/v3, LGA115x, and LGA1366. The company didn't reveal pricing.

Raijintek introduced the Metis Plus cube-type mini-ITX aluminium chassis. A successor to the original Metis launched in 2014, the Metis Plus comes with an updated brushed aluminium finish with diamond-cut edges, a 120 mm top fan mount, an extra 2.5-inch drive mount along the base, and an updated 3.5-inch/2.5-inch (1x 3.5-inch convertible to 2x 7 mm-thick 2.5-inch) drive tray design. The rest of its specifications are unchanged from the original Metis.

Measuring 190 mm x 277 mm x 254 mm (WxDxH), and weighing in at 2.12 kg, the Metis Plus features an "upside-down" (left-side) oriented mini-ITX motherboard tray, with clearance for graphics cards as long as 17 cm, and CPU coolers as tall as 16 cm. It features a concealed standard ATX PSU bay, with an AC receptacle and internal cord conveying power to the PSU. The case can either hold four 2.5-inch + one 3.5-inch drives at a time, or two each of 2.5-inch and 3.5-inch drives. The case comes with a pre-installed front 120 mm intake fan with LED lighting to match the case color. The case comes in 7 color options. The company didn't reveal pricing.

Raijintek announced availability of the Paean tempered-glass dual-compartment chassis. This vertically-partitioned case features 5 mm-thick tempered glass panels on its sides, with metal (aluminium and steel) making up only the motherboard tray with PSU and drive mounts on its reverse side; and the beams holding the panels in place. The glass panels feature a dark tint, while the aluminium motherboard tray has a black, brushed-metal finish.

The Raijintek Paean can hold standard ATX, micro-ATX, and mini-ITX motherboards. The tray has room for graphics cards as long as 31 cm with a front reservoir in place, or up to 40 cm, with a vertically placed reservoir and no additional drive caddies in place; and CPU coolers as tall as 14 cm. It can hold standard ATX power supplies as long as 20 cm. Storage areas include three each of 3.5-inch and 2.5-inch drive bays.

Raijintek unveiled its first liquid cooler that works without a prime-mover for the coolant (i.e. no pump). Further, its radiator lacks fans (i.e. no power, no noise). This closed-loop cooler works in the same principle as a heat pipe, with a combination of convention and phase-change doing the heavy lifting of heat-transfer. Heat from the source (your CPU) causes the special coolant to change phase to vapor, move to the heat-exchanger (radiator), where it condenses back to liquid, and flows back down to the block. We saw this contraption in action, and we can tell you that it works. It is ready for the real-world. Raijintek spent vast amounts of R&D budget developing this technology, and has patented it in most markets. We could see the first products based on this technology very soon.

Here are some of the first pictures of a Raijintek Cetus case with ASUS ROG co-branding. This brushed aluminium beauty is game for your ROG purist builds, serving up a spacious dual-compartment layout, with a motherboard tray that's extra wide for those tall ROG MATRIX graphics cards. With its storage area located in the bottom compartment (which it shares with the PSU), you have room for either your liquid cooling hardware, or those long EATX workstation motherboards. Ventilation options appear to include a 420 x 140 mm radiator bay on top, a 280 x 140 mm (or 360 x 120 mm) bay in the front, and a 140 mm rear exhaust. Brushed aluminium makes up the front, top, and rear panels, while tempered glass makes up the sides. A slot-in slimline optical drive slot near the front-panel completes this case's exquisiteness.

Raijintek showed off its innovative new semi-open tower-type case, the Paean. This dual-compartment case with a vertical partition in the middle, consists of four metal rods, and a thick middle-plate on which the various parts of the case are suspended. The sides of the case are covered by 4 mm thick tempered glass panels. The left compartment holds your motherboard (up to EATX length), and liquid cooling components, while the right compartment holds your storage devices, the PSU, and the front-panel. The case measures 288 mm x 590 mm x 420 mm.